Skip to content

moments_xldmoments_xldMomentsXldMomentsXldmoments_xldmoments_xldπŸ”—

Short descriptionπŸ”—

moments_xldmoments_xldMomentsXldMomentsXldmoments_xldmoments_xld β€” Geometric moments \(M_{20}\), \(M_{02}\), and \(M_{11}\) of contours or polygons.

SignatureπŸ”—

moments_xld( xld XLD, out real M11, out real M20, out real M02 )moments_xld( XLD : : : M11, M20, M02 )void MomentsXld( const HObject& XLD, HTuple* M11, HTuple* M20, HTuple* M02 )static void HOperatorSet.MomentsXld( HObject XLD, out HTuple m11, out HTuple m20, out HTuple m02 )def moments_xld( xld: HObject ) -> Tuple[Sequence[float], Sequence[float], Sequence[float]]

def moments_xld_s( xld: HObject ) -> Tuple[float, float, float]Herror moments_xld( const Hobject XLD, double* M11, double* M20, double* M02 )

Herror T_moments_xld( const Hobject XLD, Htuple* M11, Htuple* M20, Htuple* M02 )

HTuple HXLD::MomentsXld( HTuple* M20, HTuple* M02 ) const

double HXLD::MomentsXld( double* M20, double* M02 ) const

HTuple HXLD.MomentsXld( out HTuple m20, out HTuple m02 )

double HXLD.MomentsXld( out double m20, out double m02 )

DescriptionπŸ”—

moments_xldMomentsXld calculates the moments (M20m20m20, M02m02m02, and M11m11m11) of the region enclosed by the contours or polygons XLDXLDxld. See moments_region_2ndMomentsRegion2nd for the definition of these features. The moments are computed by applying Green’s theorem using only the points on the contour or polygon, i.e., no region is generated explicitly for the purpose of calculating the features. It is assumed that the contours or polygons are closed. If this is not the case moments_xldMomentsXld will artificially close the contours or polygons.

It should be noted that moments_xldMomentsXld only returns useful results if the contour or polygon encloses a region in the plane. In particular, the contour or polygon must not intersect itself. This is particularly important if open contours or polygons are passed because they are closed automatically, which can produce a self-intersection. To test whether the contours or polygons intersect themselves, test_self_intersection_xldTestSelfIntersectionXld can be used. If the contour or polygon intersects itself, useful values for the moments can be calculated with moments_points_xldMomentsPointsXld.

If more than one contour or polygon is passed, the results are stored in tuples in the same order as the respective contours or polygons in XLDXLDxld.

Execution informationπŸ”—

Execution information
  • Multithreading type: reentrant (runs in parallel with non-exclusive operators).

  • Multithreading scope: global (may be called from any thread).

  • Automatically parallelized on tuple level.

ParametersπŸ”—

XLDXLDxld (input_object) xld(-array) β†’ objectobjectHObjectHXLDHObjectHobject

Contours or polygons to be examined.

M11m11m11 (output_control) real(-array) β†’ (real)(real)HTuple (double)HTuple (double)Sequence[float]Htuple (double)

Mixed second order moment.

M20m20m20 (output_control) real(-array) β†’ (real)(real)HTuple (double)HTuple (double)Sequence[float]Htuple (double)

Second order moment along the row axis.

M02m02m02 (output_control) real(-array) β†’ (real)(real)HTuple (double)HTuple (double)Sequence[float]Htuple (double)

Second order moment along the column axis.

ComplexityπŸ”—

Let n be the number of points of the contour or polygon. Then the run time is O(n).

ResultπŸ”—

moments_xldMomentsXld returns 2 (H_MSG_TRUE) if the input is not empty. If the input is empty the behavior can be set via set_system(::'no_object_result',<Result>:). If necessary, an exception is raised.

Combinations with other operatorsπŸ”—

Combinations

Possible predecessors

gen_contours_skeleton_xldGenContoursSkeletonXld, smooth_contours_xldSmoothContoursXld, gen_polygons_xldGenPolygonsXld

Alternatives

moments_any_xldMomentsAnyXld, moments_points_xldMomentsPointsXld, moments_any_points_xldMomentsAnyPointsXld

See also

moments_any_xldMomentsAnyXld, area_center_xldAreaCenterXld, moments_region_2ndMomentsRegion2nd, area_centerAreaCenter

ModuleπŸ”—

Foundation