Operator Reference
gray_erosion_rect (Operator)
gray_erosion_rect
— Determine the minimum gray value within a rectangle.
Signature
gray_erosion_rect(Image : ImageMin : MaskHeight, MaskWidth : )
Description
gray_erosion_rect
calculates the minimum gray value of the input
image Image
within a rectangular mask of size
(MaskHeight
, MaskWidth
) for each image point.
The resulting image is returned in ImageMin
. If the
parameters MaskHeight
or MaskWidth
are even,
they are changed to the next larger odd value. At the border of the
image the gray values are mirrored.
Attention
Note that filter operators may return unexpected results if an image with a reduced domain is used as input. Please refer to the chapter Filters.
Execution Information
- Supports OpenCL compute devices.
- Multithreading type: reentrant (runs in parallel with non-exclusive operators).
- Multithreading scope: global (may be called from any thread).
- Automatically parallelized on tuple level.
- Automatically parallelized on channel level.
- Automatically parallelized on domain level.
Parameters
Image
(input_object) (multichannel-)image(-array) →
object (byte / direction / cyclic / uint2 / int2 / int4 / real)
Image for which the minimum gray values are to be calculated.
ImageMin
(output_object) (multichannel-)image(-array) →
object (byte / direction / cyclic / uint2 / int2 / int4 / real)
Image containing the minimum gray values.
MaskHeight
(input_control) extent.y →
(integer)
Height of the filter mask.
Default: 11
Suggested values: 3, 5, 7, 9, 11, 13, 15
Value range:
3
≤
MaskHeight
≤
511
(lin)
Minimum increment: 2
Recommended increment: 2
Restriction:
odd(MaskHeight) && MaskHeight < height(Image) * 2
MaskWidth
(input_control) extent.x →
(integer)
Width of the filter mask.
Default: 11
Suggested values: 3, 5, 7, 9, 11, 13, 15
Value range:
3
≤
MaskWidth
≤
511
(lin)
Minimum increment: 2
Recommended increment: 2
Restriction:
odd(MaskWidth) && MaskWidth < width(Image) * 2
Result
gray_erosion_rect
returns 2 (
H_MSG_TRUE)
if all parameters are correct.
If the input is empty the behavior can be set via
set_system('no_object_result',<Result>)
.
If necessary, an exception is raised.
See also
Module
Foundation