Operator Reference
set_framegrabber_lut (Operator)
set_framegrabber_lut
— Set look-up table of the image acquisition device.
Signature
set_framegrabber_lut( : : AcqHandle, ImageRed, ImageGreen, ImageBlue : )
Description
The operator set_framegrabber_lut
sets the look-up table (LUT) of
the image acquisition device specified by AcqHandle
. Note that
this operation is not supported for all kinds of image acquisition devices.
Attention
For a multithreaded application,
info_framegrabber
, open_framegrabber
, and
close_framegrabber
are executed exclusively.
set_framegrabber_lut
runs in parallel with all non-exclusive
operators inside and outside of this group.
Execution Information
- Multithreading type: reentrant (runs in parallel with non-exclusive operators).
- Multithreading scope: global (may be called from any thread).
- Processed without parallelization.
This operator modifies the state of the following input parameter:
During execution of this operator, access to the value of this parameter must be synchronized if it is used across multiple threads.
Parameters
AcqHandle
(input_control, state is modified) framegrabber →
(handle)
Handle of the acquisition device to be used.
ImageRed
(input_control) integer-array →
(integer)
Red level of the LUT entries.
ImageGreen
(input_control) integer-array →
(integer)
Green level of the LUT entries.
ImageBlue
(input_control) integer-array →
(integer)
Blue level of the LUT entries.
Result
The operator set_framegrabber_lut
returns the value 2 (
H_MSG_TRUE)
if the specified LUT is correct and the image acquisition device is open.
Possible Predecessors
open_framegrabber
,
get_framegrabber_lut
Possible Successors
grab_image
,
grab_data
,
grab_image_start
,
grab_image_async
,
grab_data_async
See also
get_framegrabber_lut
,
open_framegrabber
Module
Foundation