Operator Reference

HALCON Operator Reference / Tuple / Logical Operations

• HDevelop
• .NET
• Python
• C++
• C

ClassesClasses | | Operators

tuple_andtuple_andTupleAndTupleAndtuple_and (Operator)

tuple_andtuple_andTupleAndTupleAndtuple_and — Compute the logical and of two tuples.

Signature

tuple_and( : : T1, T2 : And)

Herror tuple_and(const Hlong T1, const Hlong T2, Hlong* And)

Herror T_tuple_and(const Htuple T1, const Htuple T2, Htuple* And)

void TupleAnd(const HTuple& T1, const HTuple& T2, HTuple* And)

HTuple HTuple::TupleAnd(const HTuple& T2) const

static void HOperatorSet.TupleAnd(HTuple t1, HTuple t2, out HTuple and)

HTuple HTuple.TupleAnd(HTuple t2)

def tuple_and(t1: MaybeSequence[int], t2: MaybeSequence[int]) -> Sequence[int]

def tuple_and_s(t1: MaybeSequence[int], t2: MaybeSequence[int]) -> int

Description

tuple_andtuple_andTupleAndTupleAndtuple_and computes the logical and of the input tuples T1T1T1t1t1 and T2T2T2t2t2. If both tuples have the same length the operation is performed on the corresponding elements of both tuples. Otherwise, either T1T1T1t1t1 or T2T2T2t2t2 must have length 1. In this case, the operation is performed for each element of the longer tuple with the single element of the other tuple. The input tuples must contain only integer numbers.

Exception: Empty input tuples

If any of the input tuples is empty, an exception is raised.

HDevelop In-line Operation

HDevelop provides an in-line operation for tuple_andtuple_andTupleAndTupleAndtuple_and, which can be used in an expression in the following syntax:

And := T1 and T2

Execution Information

• Multithreading type: independent (runs in parallel even with exclusive operators).
• Multithreading scope: global (may be called from any thread).
• Processed without parallelization.

Parameters

T1T1T1t1t1 (input_control)  integer(-array) → HTupleMaybeSequence[int]HTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Input tuple 1.

T2T2T2t2t2 (input_control)  integer(-array) → HTupleMaybeSequence[int]HTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Input tuple 2.

AndAndAndandand (output_control)  integer(-array) → HTupleSequence[int]HTupleHtuple (integer) (int / long) (Hlong) (Hlong)

Logical and of the input tuples.

Alternatives

tuple_ortuple_orTupleOrTupleOrtuple_or, tuple_xortuple_xorTupleXorTupleXortuple_xor, tuple_nottuple_notTupleNotTupleNottuple_not

See also

tuple_bandtuple_bandTupleBandTupleBandtuple_band, tuple_bortuple_borTupleBorTupleBortuple_bor, tuple_bxortuple_bxorTupleBxorTupleBxortuple_bxor, tuple_bnottuple_bnotTupleBnotTupleBnottuple_bnot

Module

Foundation

---

ClassesClasses | | Operators