HALCON error codes🔗
In this section all HALCON error codes are summarized, see also Handling errors in extension packages.
Error name |
Code | Description |
|---|---|---|
H_ERR_WIPT1 |
1201 | Wrong type of control parameter 1 |
H_ERR_WIPT2 |
1202 | Wrong type of control parameter 2 |
H_ERR_WIPT3 |
1203 | Wrong type of control parameter 3 |
H_ERR_WIPT4 |
1204 | Wrong type of control parameter 4 |
H_ERR_WIPT5 |
1205 | Wrong type of control parameter 5 |
H_ERR_WIPT6 |
1206 | Wrong type of control parameter 6 |
H_ERR_WIPT7 |
1207 | Wrong type of control parameter 7 |
H_ERR_WIPT8 |
1208 | Wrong type of control parameter 8 |
H_ERR_WIPT9 |
1209 | Wrong type of control parameter 9 |
H_ERR_WIPT10 |
1210 | Wrong type of control parameter 10 |
H_ERR_WIPT11 |
1211 | Wrong type of control parameter 11 |
H_ERR_WIPT12 |
1212 | Wrong type of control parameter 12 |
H_ERR_WIPT13 |
1213 | Wrong type of control parameter 13 |
H_ERR_WIPT14 |
1214 | Wrong type of control parameter 14 |
H_ERR_WIPT15 |
1215 | Wrong type of control parameter 15 |
H_ERR_WIPT16 |
1216 | Wrong type of control parameter 16 |
H_ERR_WIPT17 |
1217 | Wrong type of control parameter 17 |
H_ERR_WIPT18 |
1218 | Wrong type of control parameter 18 |
H_ERR_WIPT19 |
1219 | Wrong type of control parameter 19 |
H_ERR_WIPT20 |
1220 | Wrong type of control parameter 20 |
H_ERR_WIPV1 |
1301 | Wrong value of control parameter 1 |
H_ERR_WIPV2 |
1302 | Wrong value of control parameter 2 |
H_ERR_WIPV3 |
1303 | Wrong value of control parameter 3 |
H_ERR_WIPV4 |
1304 | Wrong value of control parameter 4 |
H_ERR_WIPV5 |
1305 | Wrong value of control parameter 5 |
H_ERR_WIPV6 |
1306 | Wrong value of control parameter 6 |
H_ERR_WIPV7 |
1307 | Wrong value of control parameter 7 |
H_ERR_WIPV8 |
1308 | Wrong value of control parameter 8 |
H_ERR_WIPV9 |
1309 | Wrong value of control parameter 9 |
H_ERR_WIPV10 |
1310 | Wrong value of control parameter 10 |
H_ERR_WIPV11 |
1311 | Wrong value of control parameter 11 |
H_ERR_WIPV12 |
1312 | Wrong value of control parameter 12 |
H_ERR_WIPV13 |
1313 | Wrong value of control parameter 13 |
H_ERR_WIPV14 |
1314 | Wrong value of control parameter 14 |
H_ERR_WIPV15 |
1315 | Wrong value of control parameter 15 |
H_ERR_WIPV16 |
1316 | Wrong value of control parameter 16 |
H_ERR_WIPV17 |
1317 | Wrong value of control parameter 17 |
H_ERR_WIPV18 |
1318 | Wrong value of control parameter 18 |
H_ERR_WIPV19 |
1319 | Wrong value of control parameter 19 |
H_ERR_WIPV20 |
1320 | Wrong value of control parameter 20 |
H_ERR_WCOMP |
1350 | Wrong value of component (see reset_obj_db()) |
H_ERR_WGCOMP |
1351 | Wrong value of gray value component (see reset_obj_db()) |
H_ERR_WIPN1 |
1401 | Wrong number of values of control parameter 1 |
H_ERR_WIPN2 |
1402 | Wrong number of values of control parameter 2 |
H_ERR_WIPN3 |
1403 | Wrong number of values of control parameter 3 |
H_ERR_WIPN4 |
1404 | Wrong number of values of control parameter 4 |
H_ERR_WIPN5 |
1405 | Wrong number of values of control parameter 5 |
H_ERR_WIPN6 |
1406 | Wrong number of values of control parameter 6 |
H_ERR_WIPN7 |
1407 | Wrong number of values of control parameter 7 |
H_ERR_WIPN8 |
1408 | Wrong number of values of control parameter 8 |
H_ERR_WIPN9 |
1409 | Wrong number of values of control parameter 9 |
H_ERR_WIPN10 |
1410 | Wrong number of values of control parameter 10 |
H_ERR_WIPN11 |
1411 | Wrong number of values of control parameter 11 |
H_ERR_WIPN12 |
1412 | Wrong number of values of control parameter 12 |
H_ERR_WIPN13 |
1413 | Wrong number of values of control parameter 13 |
H_ERR_WIPN14 |
1414 | Wrong number of values of control parameter 14 |
H_ERR_WIPN15 |
1415 | Wrong number of values of control parameter 15 |
H_ERR_WIPN16 |
1416 | Wrong number of values of control parameter 16 |
H_ERR_WIPN17 |
1417 | Wrong number of values of control parameter 17 |
H_ERR_WIPN18 |
1418 | Wrong number of values of control parameter 18 |
H_ERR_WIPN19 |
1419 | Wrong number of values of control parameter 19 |
H_ERR_WIPN20 |
1420 | Wrong number of values of control parameter 20 |
H_ERR_IONTB |
1500 | Number of input objects too big |
H_ERR_WION1 |
1501 | Wrong number of values of object parameter 1 |
H_ERR_WION2 |
1502 | Wrong number of values of object parameter 2 |
H_ERR_WION3 |
1503 | Wrong number of values of object parameter 3 |
H_ERR_WION4 |
1504 | Wrong number of values of object parameter 4 |
H_ERR_WION5 |
1505 | Wrong number of values of object parameter 5 |
H_ERR_WION6 |
1506 | Wrong number of values of object parameter 6 |
H_ERR_WION7 |
1507 | Wrong number of values of object parameter 7 |
H_ERR_WION8 |
1508 | Wrong number of values of object parameter 8 |
H_ERR_WION9 |
1509 | Wrong number of values of object parameter 9 |
H_ERR_OONTB |
1510 | Number of output objects too big |
H_ERR_BREAK |
20 | Operator canceled by user |
H_ERR_WNP |
2000 | Wrong specification of parameter (error in file: xxx.def) |
H_ERR_HONI |
2001 | Initialize HALCON: reset_obj_db(Width,Height,Components) |
H_ERR_WRKNN |
2002 | Used number of symbolic object names too big |
H_ERR_LIC_NO_LICENSE |
2003 | No license found |
H_ERR_LIC_NOT_IMPLEMENTED |
2004 | License type not implemented |
H_ERR_LIC_NO_MODULES |
2005 | No modules in license (invalid VENDOR_STRING) |
H_ERR_LIC_NO_LIC_OPER |
2006 | No license for this operator |
H_ERR_LIC_BADPLATFORM |
2008 | Vendor keys do not support this platform |
H_ERR_LIC_BADVENDORKEY |
2009 | Bad vendor keys |
H_ERR_LIC_BADSYSDATE |
2021 | System clock has been set back. This error can only occur when the FEATURE line contains an expiration date |
H_ERR_LIC_BAD_VERSION |
2022 | Invalid format for version argument |
H_ERR_LIC_CANTCONNECT |
2024 | Cannot establish a connection with a license server |
H_ERR_LIC_MAXSESSIONS |
2028 | Maximum session limit reached |
H_ERR_LIC_MAXUSERS |
2029 | All licenses in use |
H_ERR_LIC_NO_SERVER_IN_FILE |
2030 | No license server specified for floating license |
H_ERR_LIC_NOFEATURE |
2031 | Can not find feature in the license file |
H_ERR_LIC_OLDVER |
2033 | License file does not support a version this new |
H_ERR_LIC_PLATNOTLIC |
2034 | This platform not authorized by license - running on platform not included in PLATFORMS list |
H_ERR_LIC_SERVBUSY |
2035 | License server busy - the request should be retried (this is a rare occurrence) |
H_ERR_LIC_NOCONFFILE |
2036 | could not find license file |
H_ERR_LIC_BADFILE |
2037 | Invalid license file syntax |
H_ERR_LIC_NOSERVER |
2038 | Cannot connect to a license server |
H_ERR_LIC_NOTTHISHOST |
2041 | Invalid host |
H_ERR_LIC_LONGGONE |
2042 | Feature has expired |
H_ERR_LIC_BADDATE |
2043 | Invalid date format in license file |
H_ERR_LIC_BADCOMM |
2044 | Invalid data received from license server |
H_ERR_LIC_BADHOST |
2045 | Cannot resolve hostname of license server |
H_ERR_LIC_CANTWRITE |
2047 | Cannot write data to license server |
H_ERR_LIC_SERVLONGGONE |
2051 | License server does not support this version of this feature |
H_ERR_LIC_TOOMANY |
2052 | Request for more licenses than this feature supports |
H_ERR_LIC_CANTFINDETHER |
2055 | Cannot find ethernet device |
H_ERR_LIC_NOREADLIC |
2056 | Cannot read license file |
H_ERR_LIC_DATE_TOOBIG |
2067 | Date too late for binary format |
H_ERR_LIC_NOSERVRESP |
2069 | Server did not respond to message |
H_ERR_LIC_SETSOCKFAIL |
2075 | setsockopt() failed |
H_ERR_LIC_BADCHECKSUM |
2076 | Message checksum failure |
H_ERR_LIC_INTERNAL_ERROR |
2082 | Internal licensing error |
H_ERR_LIC_NOSERVCAP |
2087 | Server does not support this request |
H_ERR_LIC_POOL |
2091 | This feature is available in a different license pool |
H_ERR_HEN_CANCEL |
21 | Operator canceled |
H_ERR_WOOPI |
2100 | Wrong index for output object parameter |
H_ERR_WIOPI |
2101 | Wrong index for input object parameter |
H_ERR_WOI |
2102 | Wrong index for image object (too big or too small) |
H_ERR_WRCN |
2103 | Wrong number region/image component (see: HGetComp) |
H_ERR_WRRN |
2104 | Wrong relation name |
H_ERR_AUDI |
2105 | Access to undefined gray value component |
H_ERR_WIWI |
2106 | Wrong image width |
H_ERR_WIHE |
2107 | Wrong image height |
H_ERR_ICUNDEF |
2108 | Undefined gray value component |
H_ERR_CANCEL |
22 | Operator canceled by interrupt_operator |
H_ERR_IDBD |
2200 | Inconsistent data of data base (typing) |
H_ERR_WICPI |
2201 | Wrong index for input control parameter |
H_ERR_DBDU |
2202 | Data of data base not defined (internal error) |
H_ERR_PNTL |
2203 | Number of operators too big |
H_ERR_UEXTNI |
2205 | User extension not properly installed |
H_ERR_NPTL |
2206 | Number of packages too large |
H_ERR_NSP |
2207 | No such package installed |
H_ERR_ICHV |
2211 | Incompatible HALCON versions |
H_ERR_ICOI |
2212 | Incompatible operator interface |
H_ERR_XPKG_WXID |
2220 | Wrong extension package id |
H_ERR_XPKG_WOID |
2221 | Wrong operator id |
H_ERR_XPKG_WOIID |
2222 | Wrong operator information id |
H_ERR_TIMEOUT_BREAK |
23 | Operator canceled by userset timeout |
H_ERR_LIC_NODONGLE |
2300 | Dongle not attached, or can’t read dongle |
H_ERR_LIC_NODONGLEDRIVER |
2301 | Missing Dongle Driver |
H_ERR_LIC_TIMEOUT |
2318 | Timeout |
H_ERR_LIC_INVALID_CERTIFICATE |
2321 | License server certificate invalid |
H_ERR_LIC_INVALID_TLS_CERTIFICATE |
2335 | License server SSL/TLS certificate invalid |
H_ERR_LIC_BAD_ACTREQ |
2339 | Invalid activation request received |
H_ERR_LIC_NOT_ALLOWED |
2345 | Specified operation is not allowed |
H_ERR_LIC_ACTIVATION |
2348 | Activation error |
H_ERR_LIC_NO_CM_RUNTIME |
2379 | No CodeMeter Runtime installed (version 6.30 or later required) |
H_ERR_LIC_CM_RUNTIME_TOO_OLD |
2380 | Installed version of CodeMeter Runtime is too old (version 6.30 or later required) |
H_ERR_LIC_WRONG_EDITION |
2381 | License is for wrong edition of HALCON |
H_ERR_LIC_UNKNOWN_FLAGS |
2382 | License contains unknown FLAGS |
H_ERR_LIC_PREVIEW_EXPIRED |
2383 | HALCON preview version expired |
H_ERR_LIC_NEWVER |
2384 | License file does not support a version this old |
H_ERR_CTPL_WTYP |
2400 | Wrong Hctuple element type |
H_ERR_CPAR_WTYP |
2401 | Wrong Hcpar parameter type |
H_ERR_CTPL_WIDX |
2402 | Wrong Hctuple index |
H_ERR_WFV |
2403 | Unsupported file version |
H_ERR_WRONG_HANDLE_TYPE |
2404 | Invalid handle type |
H_ERR_WVTYP |
2410 | Wrong vector type |
H_ERR_WVDIM |
2411 | Wrong vector dimension |
H_ERR_WHDL |
2450 | Wrong (unknown) HALCON handle |
H_ERR_WID |
2451 | Wrong HALCON id, no data available |
H_ERR_IDOOR |
2452 | HALCON id out of range |
H_ERR_HANDLE_NULL |
2453 | HALCON handle is NULL |
H_ERR_HANDLE_CLEARED |
2454 | HALCON handle was already cleared |
H_ERR_HANDLE_NOSER |
2455 | HALCON handle of this type cannot be serialized |
H_ERR_HANDLE_CYCLES |
2456 | Cyclic references of handles were detected |
H_ERR_WT_CTRL_EXPECTED |
2460 | Type mismatch: expected control value, got iconic value |
H_ERR_WT_ICONIC_EXPECTED |
2461 | Type mismatch: expected iconic value, got control value |
H_ERR_XPI_INIT_NOT_CALLED |
2500 | Init function of an HALCON extension that was build with the hlibxpi interface was not called (check for correct hlibxpi export) |
H_ERR_XPI_NO_INIT_FOUND |
2501 | Init function of the required HALCON extension was not found (old interface without hlibxpi support or the hlibxpi export failed) |
H_ERR_XPI_UNRES |
2502 | Function call in HALCON extension couldn’t be resolved via hlibxpi |
H_ERR_XPI_HLIB_TOO_OLD |
2503 | The version of the HALCON library is too old for the required HALCON extension |
H_ERR_XPI_XPI_TOO_OLD |
2504 | The required HALCON extension uses an hlibxpi version that is no longer supported by the current HALCON version |
H_ERR_XPI_MAJOR_TOO_SMALL |
2505 | The current HALCON version uses an hlibxpi version that is not supported by the required HALCON extension (major number too small) |
H_ERR_XPI_MINOR_TOO_SMALL |
2506 | The current HALCON version uses an hlibxpi version that is not supported by the required HALCON extension (minor number too small) |
H_ERR_XPI_INT_WRONG_MAJOR |
2507 | Internal error: wrong version number in hlibxpi symbol list |
H_ERR_XPI_UNKNOW_HLIB_VER |
2508 | hlibxpi cannot connect to hlib: unknown hlib version |
H_ERR_HW_WFF |
2800 | Wrong hardware knowledge file format |
H_ERR_HW_WFV |
2801 | Wrong hardware knowledge file version |
H_ERR_HW_RF |
2802 | Error while reading the hardware knowledge |
H_ERR_HW_WF |
2803 | Error while writing the hardware knowledge |
H_ERR_HW_TF |
2804 | Tag in hardware knowledge file not found |
H_ERR_HW_CPU |
2805 | No CPU information in hardware knowledge file found |
H_ERR_HW_AOP |
2806 | No aop information in hardware knowledge file found |
H_ERR_HW_HVAR |
2807 | No aop information for this HALCON variant found |
H_ERR_HW_HARCH |
2808 | No aop information for this HALCON architecture found |
H_ERR_HW_HOP |
2809 | No aop information for specified Operator found |
H_ERR_HW_WAOPM |
2810 | Unknown aop model |
H_ERR_HW_WTD |
2811 | Wrong tag derivate in hardware knowledge file |
H_ERR_HW_IE |
2812 | Internal error while processing hardware knowledge |
H_ERR_HW_CANCEL |
2813 | Optimizing aop was canceled |
H_ERR_GV_WA |
2830 | Wrong access to global variable |
H_ERR_GV_NC |
2831 | Used global variable does not exist |
H_ERR_GV_NG |
2832 | Used global variable not accessible via GLOBAL_ID |
H_ERR_HM_NT |
2835 | HALCON server to terminate is still working on a job |
H_ERR_HM_NA |
2837 | No such HALCON software agent |
H_ERR_AG_CN |
2838 | Hardware check for parallelization not possible on a single-processor machine |
H_ERR_AG_NC |
2839 | Sequential HALCON does not support parallel hardware check (use Parallel HALCON instead) |
H_ERR_AG_IN |
2840 | Initialization of agent failed |
H_ERR_AG_NT |
2841 | Termination of agent failed |
H_ERR_AG_HW |
2842 | Inconsistent hardware description file |
H_ERR_AG_II |
2843 | Inconsistent agent information file |
H_ERR_AG_IK |
2844 | Inconsistent agent knowledge file |
H_ERR_AG_WV |
2845 | The file with the parallelization information does not match to the currently HALCON version/revision |
H_ERR_AG_WH |
2846 | The file with the parallelization information does not match to the currently used machine |
H_ERR_AG_KC |
2847 | Inconsistent knowledge base of HALCON software agent |
H_ERR_AG_CT |
2848 | Unknown communication type |
H_ERR_AG_MT |
2849 | Unknown message type for HALCON software agent |
H_ERR_AG_WK |
2850 | Error while saving the parallelization knowledge |
H_ERR_AG_WW |
2851 | Wrong type of work information |
H_ERR_AG_WA |
2852 | Wrong type of application information |
H_ERR_AG_WE |
2853 | Wrong type of experience information |
H_ERR_AG_NU |
2854 | Unknown name of HALCON software agent |
H_ERR_AG_NE |
2855 | Unknown name and communication address of HALCON software agent |
H_ERR_AG_RR |
2856 | CPU representative (HALCON software agent) not reachable |
H_ERR_AG_CR |
2857 | CPU refuses work |
H_ERR_AG_RN |
2858 | Description of scheduling resource not found |
H_ERR_AG_TILT |
2859 | Not accessible function of HALCON software agent |
H_ERR_WRT |
2860 | Wrong type: HALCON scheduling resource |
H_ERR_WRS |
2861 | Wrong state: HALCON scheduling resource |
H_ERR_UNKPT |
2862 | Unknown parameter type: HALCON scheduling resource |
H_ERR_UNKPARVAL |
2863 | Unknown parameter value: HALCON scheduling resource |
H_ERR_CTRL_WPP |
2864 | Wrong post processing of control parameter |
H_ERR_GETTI |
2867 | Error while trying to get time (time query) |
H_ERR_GETCPUNUM |
2868 | Error while trying to get the number of processors |
H_ERR_TMPFNF |
2869 | Error while accessing temporary file |
H_ERR_MQCNCL |
2890 | Message queue wait operation canceled |
H_ERR_MQOVL |
2891 | Message queue overflow |
H_ERR_MQCLEAR |
2892 | Threads still wait on message queue while clearing it |
H_ERR_M_WRFILE |
2893 | Invalid file format for a message |
H_ERR_DICT_KEY |
2894 | Dictionary does not contain requested key |
H_ERR_DICT_TUPLE_LENGTH |
2895 | Tuple in dictionary has incorrect length |
H_ERR_DICT_TUPLE_TYPE |
2896 | Tuple in dictionary is of incorrect type |
H_ERR_DICT_INVALID_INDEX |
2897 | Invalid index for dict tuple |
H_ERR_DICT_NESTED_TOO_DEEP |
2899 | Dict is nested too deep |
H_ERR_PTHRD_SCHED |
2900 | Error while forcing a context switch |
H_ERR_SCHED_GAFF |
2901 | Error while accessing the CPU affinity |
H_ERR_SCHED_SAFF |
2902 | Error while setting the CPU affinity |
H_ERR_CO_WSO |
2950 | Wrong synchronization object |
H_ERR_CO_WOCO |
2952 | Wrong thread object |
H_ERR_CO_IOPNI |
2953 | Input Object was not initialized |
H_ERR_CO_ICPNI |
2954 | Input control parameter is not initialized |
H_ERR_CO_OOPNI |
2955 | Output Object parameter is not initialized |
H_ERR_CO_OCPNI |
2956 | Output control parameter is not initialized |
H_ERR_PTHRD_CR |
2970 | creation of pthread failed |
H_ERR_PTHRD_DT |
2971 | pthread-detach failed |
H_ERR_PTHRD_JO |
2972 | pthread-join failed |
H_ERR_PTHRD_MI |
2973 | Initialization of mutex variable failed |
H_ERR_PTHRD_MD |
2974 | Deletion of mutex variable failed |
H_ERR_PTHRD_ML |
2975 | Lock of mutex variable failed |
H_ERR_PTHRD_MU |
2976 | Unlock of mutex variable failed |
H_ERR_PTHRD_CS |
2977 | Failed to signal pthread condition variable |
H_ERR_PTHRD_CW |
2978 | Failed to wait for pthread condition variable |
H_ERR_PTHRD_CI |
2979 | Failed to init pthread condition variable |
H_ERR_PTHRD_CD |
2980 | Failed to destroy pthread condition variable |
H_ERR_PTHRD_ES |
2981 | Failed to signal event |
H_ERR_PTHRD_EW |
2982 | Failed to wait for an event |
H_ERR_PTHRD_EI |
2983 | Failed to init an event |
H_ERR_PTHRD_ED |
2984 | Failed to destroy an event |
H_ERR_PTHRD_TSDC |
2985 | Failed to create a tsd key |
H_ERR_PTHRD_TSDS |
2986 | Failed to set a tsd key |
H_ERR_PTHRD_TSDG |
2987 | Failed to get a tsd key |
H_ERR_PTHRD_TSDF |
2988 | Failed to free a tsd key |
H_ERR_PTHRD_BA |
2989 | Aborted waiting at a barrier |
H_ERR_DCDG_FLE |
2990 | ‘Free list’ is empty while scheduling |
H_ERR_MSG_PNCI |
2991 | Communication partner not checked in |
H_ERR_MSG_CSAI |
2992 | You can not start the communication system while running it |
H_ERR_MSG_CSNI |
2993 | Communication partner not checked in |
H_ERR_PTHRD_BI |
2994 | Failed to init a barrier |
H_ERR_PTHRD_BW |
2995 | Failed to wait at a barrier |
H_ERR_PTHRD_BD |
2996 | Failed to destroy a barrier |
H_ERR_RCOIMA |
3010 | Region completely outside of the image domain |
H_ERR_ROOIMA |
3011 | Region (partially) outside of the definition range of the image |
H_ERR_RIEI |
3012 | Intersected definition range region / image empty |
H_ERR_EDEF |
3013 | Image with empty definition range (=> no gray values) |
H_ERR_IIEI |
3014 | No common image point of two images |
H_ERR_FLTS |
3015 | Wrong region for image (first row < 0) |
H_ERR_LLTB |
3016 | Wrong region for image (column in last row >= image width) |
H_ERR_UENOI |
3017 | Number of images unequal in input parameters |
H_ERR_HTS |
3018 | Image height too small |
H_ERR_WTS |
3019 | Image width too small |
H_ERR_CHSEG |
3020 | Internal error: multiple call of HRLInitSeg() |
H_ERR_RLSEG1 |
3021 | Internal error: HRLSeg() not initialized |
H_ERR_WGAUSSM |
3022 | Wrong size of filter for Gauss |
H_ERR_FSEIS |
3033 | Filter size exceeds image size |
H_ERR_FSEVAN |
3034 | Filter size have to be odd |
H_ERR_FSTOBIG |
3035 | Filter is too big |
H_ERR_EMPTREG |
3036 | Input region is empty |
H_ERR_DOM_DIFF |
3037 | Domains of the input images differ |
H_ERR_ROWTB |
3040 | Row value of a coordinate > 2^30-1 |
H_ERR_ROWTS |
3041 | Row value of a coordinate < -2^30+1 |
H_ERR_COLTB |
3042 | Column value of a coordinate > 2^30-1 |
H_ERR_COLTS |
3043 | Column value of a coordinate < -2^30+1 |
H_ERR_WRTHR |
3100 | Wrong segmentation threshold |
H_ERR_UNKF |
3101 | Unknown feature |
H_ERR_UNKG |
3102 | Unknown gray value feature |
H_ERR_EINCC |
3103 | Internal error in HContCut |
H_ERR_EINCP1 |
3104 | Error in HContToPol: distance of points too big |
H_ERR_EINCP2 |
3105 | Error in HContToPol: contour too long |
H_ERR_TMR |
3106 | Too many rows (IPImageTransform) |
H_ERR_SFZ |
3107 | Scaling factor = 0.0 (IPImageScale) |
H_ERR_OOR |
3108 | Wrong range in transformation matrix |
H_ERR_NEF |
3109 | Internal error in IPvvf: no element free |
H_ERR_NOOB |
3110 | Number of input objects is zero |
H_ERR_EMPOB |
3111 | At least one input object has an empty region |
H_ERR_NPOT |
3112 | Operation allowed for rectangular images 2**n only |
H_ERR_TMEP |
3113 | Too many relevant points (IPHysterese) |
H_ERR_LTB |
3114 | Number of labels in image too big |
H_ERR_NNLA |
3115 | No labels with negative values allowed |
H_ERR_WFS |
3116 | Wrong filter size (too small?) |
H_ERR_IWDS |
3117 | Images with different image size |
H_ERR_IWTL |
3118 | Target image too wide or too far on the right |
H_ERR_IWTS |
3119 | Target image too narrow or too far on the left |
H_ERR_IHTL |
3120 | Target image too high or too far down |
H_ERR_IHTS |
3121 | Target image too low or too far up |
H_ERR_DNOC |
3122 | Number of channels in the input parameters are different |
H_ERR_WRCFAFLT |
3123 | Wrong color filter array type |
H_ERR_WRCFAINT |
3124 | Wrong color filter array interpolation |
H_ERR_NO_AFFTRANS |
3125 | Homogeneous matrix does not represent an affine transformation |
H_ERR_INPNOBDRY |
3126 | Inpainting region too close to the image border |
H_ERR_DSIZESD |
3127 | Source and destination differ in size |
H_ERR_AXIS_UNDEF |
3129 | Reflection axis undefined |
H_ERR_COWTS |
3131 | Coocurrence matrix: too little columns for quantization |
H_ERR_COHTS |
3132 | Coocurrence matrix: too little rows for quantization |
H_ERR_NUM_COLMN |
3133 | Wrong number of columns |
H_ERR_NUM_LINES |
3134 | Wrong number of rows |
H_ERR_OVL |
3135 | Number has too many digits |
H_ERR_NOT_SYM |
3136 | Matrix is not symmetric |
H_ERR_NUM_COLS |
3137 | Matrix is too big |
H_ERR_SYNTAX |
3138 | Wrong structure of file |
H_ERR_MISSING |
3139 | Lesser than 2 matrices |
H_ERR_COOC_MEM |
3140 | Not enough memory |
H_ERR_NO_FILE |
3141 | Can not read the file |
H_ERR_FILE_WR |
3142 | Can not open file for writing |
H_ERR_NUM_LUCOLS |
3143 | Too many lookup table colors |
H_ERR_WNOLI |
3145 | Too many Hough points (lines) |
H_ERR_DITS |
3146 | Target image has got wrong height (not big enough) |
H_ERR_WINTM |
3147 | Wrong interpolation mode |
H_ERR_THICK_NK |
3148 | Region not compact or not connected |
H_ERR_WIND3 |
3170 | Wrong filter index for filter size 3 |
H_ERR_WIND5 |
3171 | Wrong filter index for filter size 5 |
H_ERR_WIND7 |
3172 | Wrong filter index for filter size 7 |
H_ERR_WLAWSS |
3173 | Wrong filter size; only 3/5/7 |
H_ERR_NE_NPTS |
3175 | Number of suitable pixels too small to reliably estimate the noise |
H_ERR_WNEE |
3200 | Different number of entries/exits in HContCut |
H_ERR_REF |
3201 | Reference to the underlying contour is missing |
H_ERR_XLDWT |
3250 | Wrong XLD type |
H_ERR_XLD_RPF |
3252 | Internal error: border point is set to FG |
H_ERR_XLD_MCL |
3253 | Internal error: maximum contour length exceeded |
H_ERR_XLD_MCN |
3254 | Internal error: maximum number of contours exceeded |
H_ERR_XLD_CTS |
3255 | Contour too short for operator |
H_ERR_XLD_CRD |
3256 | Regression parameters of contours already computed |
H_ERR_XLD_CRND |
3257 | Regression parameters of contours not yet entered! Please compute them by calling regress_cont_xld |
H_ERR_DBXC |
3258 | Data base: XLD object has been deleted |
H_ERR_DBWXID |
3259 | Data base: object has no XLD-ID |
H_ERR_XLD_WNP |
3260 | Internal error: wrong number of contour points allocated |
H_ERR_XLD_CAND |
3261 | Contour attribute not defined |
H_ERR_FIT_ELLIPSE |
3262 | Ellipse fitting failed |
H_ERR_FIT_CIRCLE |
3263 | Circle fitting failed |
H_ERR_FIT_CLIP |
3264 | All points classified as outliers (ClippingFactor too small or used points not similar to primitive) |
H_ERR_FIT_QUADRANGLE |
3265 | Quadrangle fitting failed |
H_ERR_INCOMPL_RECT |
3266 | No points found for at least one side of the rectangle |
H_ERR_XLD_COI |
3267 | A contour point lies outside of the image |
H_ERR_FIT_NOT_ENOUGH_POINTS |
3274 | Not enough valid points for fitting the model |
H_ERR_NWF |
3275 | No ARC/INFO world file |
H_ERR_NAIGF |
3276 | No ARC/INFO generate file |
H_ERR_DXF_UEOF |
3278 | Unexpected end of file while reading DXF file |
H_ERR_DXF_CRGC |
3279 | Cannot read DXF-group code from file |
H_ERR_DXF_INAPP |
3280 | Inconsistent number of attributes per point in DXF file |
H_ERR_DXF_INAPPN |
3281 | Inconsistent number of attributes and names in DXF file |
H_ERR_DXF_INAPCN |
3282 | Inconsistent number of global attributes and names in DXF file |
H_ERR_DXF_CRAPP |
3283 | Cannot read attributes from DXF file |
H_ERR_DXF_CRAPC |
3284 | Cannot read global attributes from DXF file |
H_ERR_DXF_CRAN |
3285 | Cannot read attribute names from DXF file |
H_ERR_DXF_WPN |
3286 | Wrong generic parameter name |
H_ERR_DXF_IEDT |
3289 | Internal DXF I/O error: Wrong data type |
H_ERR_XLD_ISOL_POINT |
3290 | Isolated point while contour merging |
H_ERR_NURBS_CCBF |
3291 | Constraints (MaxError/MaxDistance) cannot be fulfilled |
H_ERR_NSEG |
3292 | No segment in contour |
H_ERR_NO_ONE_P |
3293 | Only one or no point in template contour |
H_ERR_TMFE |
3301 | Maximum number of attributes per example exceeded |
H_ERR_TMSAM |
3305 | Too many examples for one data set for training |
H_ERR_TMCLS |
3306 | Too many classes |
H_ERR_TMBOX |
3307 | Maximum number of cuboids exceeded |
H_ERR_CLASS2_ID |
3316 | Wrong id in classification file |
H_ERR_CLASS2_VERS |
3317 | The version of the classifier is not supported |
H_ERR_TM_NO_CL |
3319 | Text model does not contain a classifier yet (use set_text_model_param) |
H_ERR_ML_KMEAN_INITIALIZATION_ERROR |
3325 | Error in cluster initialization of the K-Mean algorithm |
H_ERR_GMM_NOTRAINFILE |
3330 | Invalid file format for GMM training samples |
H_ERR_GMM_WRTRAINVERS |
3331 | The version of the GMM training samples is not supported |
H_ERR_GMM_WRSMPFORMAT |
3332 | Wrong training sample format |
H_ERR_GMM_NOCLASSFILE |
3333 | Invalid file format for Gaussian Mixture Model (GMM) |
H_ERR_GMM_WRCLASSVERS |
3334 | The version of the Gaussian Mixture Model (GMM) is not supported |
H_ERR_GMM_TRAIN_UNKERR |
3335 | Internal error while training the GMM |
H_ERR_GMM_TRAIN_COLLAPSED |
3336 | Singular covariance matrix |
H_ERR_GMM_TRAIN_NOSAMPLE |
3337 | No samples for at least one class |
H_ERR_GMM_TRAIN_FEWSAMPLES |
3338 | Too few samples for at least one class |
H_ERR_GMM_NOTTRAINED |
3340 | GMM has not been trained yet |
H_ERR_GMM_NOTRAINDATA |
3341 | No training samples stored in the classifier |
H_ERR_GMM_NOSITEM |
3342 | Serialized item does not contain a valid Gaussian Mixture Model (GMM) |
H_ERR_MLP_UNKOUTFUNC |
3350 | Unknown output function |
H_ERR_MLP_NOT01ENC |
3351 | Target vector not in 0-1 encoding |
H_ERR_MLP_NOTRAINDATA |
3352 | No training samples stored in the classifier |
H_ERR_MLP_NOTRAINFILE |
3353 | Invalid file format for MLP training samples |
H_ERR_MLP_WRTRAINVERS |
3354 | The version of the MLP training samples is not supported |
H_ERR_MLP_WRSMPFORMAT |
3355 | Wrong training sample format |
H_ERR_MLP_NOCLASSIF |
3356 | MLP is not a classifier; use OutputFunction = ‘softmax’ in create_class_mlp |
H_ERR_MLP_NOCLASSFILE |
3357 | Invalid file format for multilayer perceptron (MLP) |
H_ERR_MLP_WRCLASSVERS |
3358 | The version of the multilayer perceptron (MLP) is not supported |
H_ERR_WRNUMCHAN |
3359 | Wrong number of image channels |
H_ERR_MLP_WRNUMPARAM |
3360 | Number of MLP parameters too large |
H_ERR_MLP_NOSITEM |
3361 | Serialized item does not contain a valid multilayer perceptron (MLP) |
H_ERR_LUT_WRNUMCHAN |
3370 | The number of image channels and the number of dimensions of the look-up table do not match |
H_ERR_LUT_NRCHANLARGE |
3371 | A look-up table can be build only for a 2 or 3 channel classifier |
H_ERR_LUT_CANNOTCREAT |
3372 | Cannot create a look-up table. Please choose a larger ‘bit_depth’ or select ‘fast’ for ‘class_selection’ |
H_ERR_SVM_NOTRAINDATA |
3380 | No training samples stored in the classifier |
H_ERR_SVM_NOTRAINFILE |
3381 | Invalid file format for SVM training samples |
H_ERR_SVM_WRTRAINVERS |
3382 | The version of the SVM training samples is not supported |
H_ERR_SVM_WRSMPFORMAT |
3383 | Wrong training sample format |
H_ERR_SVM_NOCLASSFILE |
3384 | Invalid file format for support vector machine (SVM) |
H_ERR_SVM_WRCLASSVERS |
3385 | The version of the support vector machine (SVM) is not supported |
H_ERR_SVM_WRNRCLASS |
3386 | Wrong number of classes |
H_ERR_SVM_NU_TOO_BIG |
3387 | Nu was chosen too big |
H_ERR_SVM_TRAIN_FAIL |
3388 | SVM training failed |
H_ERR_SVM_DO_NOT_FIT |
3389 | Old SVM and new SVM do not match |
H_ERR_SVM_NO_TRAIN_ADD |
3390 | SVM contains no trained support vectors |
H_ERR_SVM_KERNELNOTRBF |
3391 | Kernel is not an RBF kernel |
H_ERR_SVM_NO_TRAIND_FOR_CLASS |
3392 | Train data does not contain all classes |
H_ERR_SVM_NOT_TRAINED |
3393 | SVM not trained |
H_ERR_NOT_TRAINED |
3394 | Classifier not trained |
H_ERR_SVM_NOSITEM |
3395 | Serialized item does not contain a valid support vector machine (SVM) |
H_ERR_ROTNR |
3401 | Wrong rotation number |
H_ERR_GOL |
3402 | Wrong letter for Golay element |
H_ERR_BEZ |
3403 | Wrong reference point |
H_ERR_ITER |
3404 | Wrong number of iterations |
H_ERR_MOSYS |
3405 | Morphology: system error |
H_ERR_ART |
3406 | Wrong type of boundary |
H_ERR_OBJI |
3407 | Morphology: wrong number of input objects |
H_ERR_OBJO |
3408 | Morphology: wrong number of output objects |
H_ERR_PARI |
3409 | Morphology: wrong number of input control parameter |
H_ERR_PARO |
3410 | Morphology: wrong number of output control parameter |
H_ERR_SELC |
3411 | Morphology: structuring element is infinite |
H_ERR_WRNSE |
3412 | Morphology: wrong name for structuring element |
H_ERR_WRRLN1 |
3500 | Wrong number of run length rows (chords): smaller than 0 |
H_ERR_WRRLN2 |
3501 | Number of chords too big. Increase ‘current_runlength_number’ using set_system! |
H_ERR_WRRLL |
3502 | Run length row with negative length |
H_ERR_RLLTB |
3503 | Run length row >= image height |
H_ERR_RLLTS |
3504 | Run length row < 0 |
H_ERR_RLCTB |
3505 | Run length column >= image width |
H_ERR_RLCTS |
3506 | Run length column < 0 |
H_ERR_CHLTB |
3507 | For CHORD_TYPE: Number of row too big |
H_ERR_CHLTS |
3508 | For CHORD_TYPE: Number of row too small |
H_ERR_CHCTB |
3509 | For CHORD_TYPE: Number of column too big |
H_ERR_MRLE |
3510 | Exceeding the maximum number of run lengths while automatical expansion |
H_ERR_ICCOMPL |
3511 | Internal error: Region->compl neither true/false |
H_ERR_RLEMAX |
3512 | Internal error: Region->max_num < Region->num |
H_ERR_WRRLN3 |
3513 | Internal error: number of chords too big for num_max |
H_ERR_OPNOCOMPL |
3514 | Operator cannot be implemented for complemented regions; intersect the region with a finite region or set clip_region to true with set_system |
H_ERR_WIMAW1 |
3520 | Image width must be positive |
H_ERR_WIMAW2 |
3521 | Image width > MAX_FORMAT |
H_ERR_WIMAH1 |
3522 | Image height must be positive |
H_ERR_WIMAH2 |
3523 | Image height > MAX_FORMAT |
H_ERR_WIMAW3 |
3524 | Image width <= 0 |
H_ERR_WIMAH3 |
3525 | Image height <= 0 |
H_ERR_TMS |
3550 | Too many segments |
H_ERR_NO_INT8_IMAGE |
3551 | ‘int8’ images are available on 64 bit systems only |
H_ERR_POINT_AT_INFINITY |
3600 | Point at infinity cannot be converted to a Euclidean point |
H_ERR_ML_NO_COVARIANCE |
3601 | Covariance matrix could not be determined |
H_ERR_RANSAC_PRNG |
3602 | RANSAC algorithm didn’t find enough point correspondences |
H_ERR_RANSAC_TOO_DIFFERENT |
3603 | RANSAC algorithm didn’t find enough point correspondences |
H_ERR_PTI_FALLBACK |
3604 | Internal diagnosis: fallback method had to be used |
H_ERR_PTI_TRAFO_SING |
3605 | Projective transformation is singular |
H_ERR_PTI_MOSAIC_UNDERDET |
3606 | Mosaic is under-determined |
H_ERR_COV_NPD |
3607 | Input covariance matrix is not positive definite |
H_ERR_TOO_MANY_POINTS |
3608 | Number of input points too large |
H_ERR_INPC |
3620 | Inconsistent number of point correspondences |
H_ERR_NOPA |
3621 | At least one image cannot be reached from the reference image |
H_ERR_IINE |
3622 | The image with specified index does not exist |
H_ERR_NOCM |
3623 | Matrix is not a camera matrix |
H_ERR_SKNZ |
3624 | Skew is not zero |
H_ERR_ILFL |
3625 | Illegal focal length |
H_ERR_KANZ |
3626 | Distortion is not zero |
H_ERR_VARA |
3627 | It is not possible to determine all parameters for variable camera parameters |
H_ERR_LVDE |
3628 | No valid implementation selected |
H_ERR_KPAR |
3629 | Kappa can only be determined with the gold-standard method |
H_ERR_IMOD |
3630 | Conflicting number of images and projection mode |
H_ERR_PNIC |
3631 | Error in projection: Point not in any cube map |
H_ERR_NO_SOL |
3632 | No solution found |
H_ERR_TINZ |
3633 | Tilt is not zero |
H_ERR_ILMD |
3640 | Illegal combination of estimation method and parameters to be determined |
H_ERR_NOFFTOPT |
3650 | Invalid file format for FFT optimization data |
H_ERR_WRFFTOPTVERS |
3651 | The version of the FFT optimization data is not supported |
H_ERR_WRHALCONVERS |
3652 | Optimization data was created with a different HALCON variant (Sequential HALCON / Parallel HALCON) |
H_ERR_OPTFAIL |
3653 | Storing of the optimization data failed |
H_ERR_FFTOPT_NOSITEM |
3654 | Serialized item does not contain valid FFT optimization data |
H_ERR_RDS_NSC |
3660 | No contours suitable for self-calibration found |
H_ERR_RDS_NSS |
3661 | No stable solution found: please change the inlier threshold or select contours manually |
H_ERR_RDS_ISS |
3662 | Unstable solution: please choose more or different contours |
H_ERR_RDS_NEC |
3663 | Not enough contours for calibration: please select contours manually |
H_ERR_INVLD_DISP_RANGE |
3690 | Disparity range exceeds the maximum permitted |
H_ERR_EPIINIM |
3700 | Epipoles are within the image domain: no rectification possible |
H_ERR_EPI_FOV |
3701 | Fields of view of both cameras do not intersect each other |
H_ERR_EPI_RECT |
3702 | The stereo rectification is impossible |
H_ERR_BI_WT_TARGET |
3710 | Wrong type of parameter target_thickness |
H_ERR_BI_WT_THICKNESS |
3711 | Wrong type of parameter thickness_tolerance |
H_ERR_BI_WT_POSITION |
3712 | Wrong type of parameter position_tolerance |
H_ERR_BI_WT_SIGMA |
3713 | Wrong type of parameter sigma |
H_ERR_BI_WV_SIGMA |
3714 | Wrong value of parameter sigma |
H_ERR_BI_WT_THRESH |
3715 | Wrong type of parameter threshold |
H_ERR_BI_WV_TARGET |
3716 | Wrong value of parameter target_thickness |
H_ERR_BI_WV_THICKNESS |
3717 | Wrong value of parameter thickness_tolerance |
H_ERR_BI_WV_POSITION |
3718 | Wrong value of parameter position_tolerance |
H_ERR_BI_WV_THRESH |
3719 | Wrong value of parameter threshold |
H_ERR_BI_WT_REFINE |
3720 | Wrong type of parameter refinement |
H_ERR_BI_WV_REFINE |
3721 | Wrong value of parameter refinement |
H_ERR_BI_WT_RESOL |
3722 | Wrong type of parameter resolution |
H_ERR_BI_WV_RESOL |
3723 | Wrong value of parameter resolution |
H_ERR_BI_WT_POLARITY |
3724 | Wrong type of parameter polarity |
H_ERR_BI_WV_POLARITY |
3725 | Wrong value of parameter polarity |
H_ERR_SOL_EMPTY_MODEL_LIST |
3751 | No sheet-of-light model available |
H_ERR_SOL_WNIW |
3752 | Wrong input image size (width) |
H_ERR_SOL_WNIH |
3753 | Wrong input image size (height) |
H_ERR_SOL_WPROF_REG |
3754 | The bounding-box around the profile region does not fit the domain of definition of the input image |
H_ERR_SOL_CAL_NONE |
3755 | Calibration extend not set |
H_ERR_SOL_UNDEF_DISPARITY |
3756 | Undefined disparity image |
H_ERR_SOL_UNDEF_DISPDOMAIN |
3757 | Undefined domain for disparity image |
H_ERR_SOL_UNDEF_CAMPAR |
3758 | Undefined camera parameter |
H_ERR_SOL_UNDEF_LPCS |
3759 | Undefined pose of the light plane |
H_ERR_SOL_UNDEF_CCS |
3760 | Undefined pose of the camera coordinate system |
H_ERR_SOL_UNDEF_CCS_2_LPCS |
3761 | Undefined transformation from the coordinate system of the camera to the coordinate system of the light plane |
H_ERR_SOL_UNDEF_MOV_POSE |
3762 | Undefined movement pose for xyz calibration |
H_ERR_SOL_WV_SCALE |
3763 | Wrong value of scale parameter |
H_ERR_SOL_WV_PAR_NAME |
3764 | Wrong parameter name |
H_ERR_SOL_WT_METHOD |
3765 | Wrong type of parameter method |
H_ERR_SOL_WT_AMBIGUITY |
3766 | Wrong type of parameter ambiguity |
H_ERR_SOL_WT_SCORE_TYPE |
3767 | Wrong type of parameter score |
H_ERR_SOL_WT_CALIBRATION |
3768 | Wrong type of parameter calibration |
H_ERR_SOL_WT_NUM_PROF |
3769 | Wrong type of parameter number_profiles |
H_ERR_SOL_WT_CAM_PAR |
3770 | Wrong type of element in parameter camera_parameter |
H_ERR_SOL_WT_PAR_POSE |
3771 | Wrong type of element in pose |
H_ERR_SOL_WV_METHOD |
3772 | Wrong value of parameter method |
H_ERR_SOL_WT_THRES |
3773 | Wrong type of parameter min_gray |
H_ERR_SOL_WV_AMBIGUITY |
3774 | Wrong value of parameter ambiguity |
H_ERR_SOL_WV_SCORE_TYPE |
3775 | Wrong value of parameter score_type |
H_ERR_SOL_WV_CALIBRATION |
3776 | Wrong value of parameter calibration |
H_ERR_SOL_WV_NUM_PROF |
3777 | Wrong value of parameter number_profiles |
H_ERR_SOL_WV_CAMERA_TYPE |
3778 | Wrong type of camera |
H_ERR_SOL_WN_CAM_PAR |
3779 | Wrong number of values of parameter camera_parameter |
H_ERR_SOL_WN_POSE |
3780 | Wrong number of values of parameter pose |
H_ERR_SOL_NO_TARGET_FOUND |
3781 | Calibration target not found |
H_ERR_SOL_NO_VALID_SOL |
3782 | The calibration algorithm failed to find a valid solution |
H_ERR_SOL_WT_CALIB_OBJECT |
3783 | Wrong type of parameter calibration_object |
H_ERR_SOL_INVALID_CALIB_OBJECT |
3784 | Invalid calibration object |
H_ERR_SOL_NO_CALIB_OBJECT_SET |
3785 | No calibration object set |
H_ERR_SOL_WR_FILE_FORMAT |
3786 | Invalid file format for sheet-of-light model |
H_ERR_SOL_WR_FILE_VERS |
3787 | The version of the sheet-of-light model is not supported |
H_ERR_SOL_CAMPAR_UNSUPPORTED |
3788 | Camera type not supported by calibrate_sheet_of_light_model |
H_ERR_SOL_PAR_CALIB |
3790 | Parameter does not match the set ‘calibration’ |
H_ERR_SOL_WGV_DISP |
3791 | The gray values of the disparity image, which specify rows in the camera image, do not fit the height of the camera |
H_ERR_TI_WRONGMODEL |
3800 | Texture inspection model has the wrong type |
H_ERR_TI_NOTTRAINED |
3801 | Texture inspection model is not trained |
H_ERR_TI_NOTRAINDATA |
3802 | Texture inspection model has no training data |
H_ERR_TI_NOTRAINFILE |
3803 | Invalid file format for a texture inspection model |
H_ERR_TI_WRTRAINVERS |
3804 | The version of the texture inspection model is not supported |
H_ERR_TI_WRSMPFORMAT |
3805 | Invalid file format for the training samples |
H_ERR_TI_WRSMPVERS |
3806 | The version of the training sample file is not supported |
H_ERR_TI_WRIMGSIZE |
3807 | At least one of the images within the texture inspection model is too small |
H_ERR_TI_WRSMPTEXMODEL |
3808 | The read samples do not match the current texture model |
H_ERR_NOT_ENOUGH_IMAGES |
3809 | The texture model does not contain any images |
H_ERR_SING |
3850 | The light source positions are linearly dependent |
H_ERR_FEWIM |
3851 | No sufficient image indication |
H_ERR_ZBR_NOS |
3852 | Internal error: Function has equal signs in HZBrent |
H_ERR_DIMK |
3900 | Kalman: Dimension n,m or p has got a undefined value |
H_ERR_NOFILE |
3901 | Kalman: File does not exist |
H_ERR_FF1 |
3902 | Kalman: Error in file (row of dimension) |
H_ERR_FF2 |
3903 | Kalman: Error in file (row of marking) |
H_ERR_FF3 |
3904 | Kalman: Error in file (value is no float) |
H_ERR_NO_A |
3905 | Kalman: Matrix A is missing in file |
H_ERR_NO_C |
3906 | Kalman: Matrix C is missing in file |
H_ERR_NO_Q |
3907 | Kalman: Matrix Q is missing in file |
H_ERR_NO_R |
3908 | Kalman: Matrix R is missing in file |
H_ERR_NO_GU |
3909 | Kalman: G or u is missing in file |
H_ERR_NOTSYMM |
3910 | Kalman: Covariant matrix is not symmetric |
H_ERR_SINGU |
3911 | Kalman: Equation system is singular |
H_ERR_SLM_NOT_PERSISTENT |
3950 | Feature or operation available only in ‘persistent’ mode |
H_ERR_SLM_MSW_TOO_LARGE |
3951 | ‘min_stripe_width’ is too large for the selected ‘pattern_width’ and/or ‘pattern_height’ |
H_ERR_SLM_SSW_TOO_LARGE |
3952 | ‘single_stripe_width’ is too large for the selected ‘pattern_width’ and/or ‘pattern_height’ |
H_ERR_SLM_MSW_GT_SSW |
3953 | ‘min_stripe_width’ has to be smaller or equal ‘single_stripe_width’ |
H_ERR_SLM_SSW_LT_MSW |
3954 | ‘single_stripe_width’ is too small for the selected ‘min_stripe_width’ |
H_ERR_SLM_NOT_PREP |
3955 | The structured light model can only be decoded after calling ‘gen_structured_light_pattern’ |
H_ERR_SLM_NO_OBJS |
3956 | The structured light model does not contain the queried object |
H_ERR_SLM_WRVERS |
3957 | The version of the structured light model is not supported |
H_ERR_SLM_WRFILE |
3958 | Invalid file format for a structured light model |
H_ERR_SLM_WRONGPATTERN |
3959 | Parameter does not match the set ‘pattern_type’ |
H_ERR_SLM_NOT_DECODED |
3960 | ‘defect_image’ can only be computed after calling ‘decode_structured_light_pattern’ |
H_ERR_SLM_WRONGMODEL |
3961 | The structured light model has the wrong type |
H_ERR_SLM_WNUMCAMS |
3962 | The camera setup model has to contain two sets of camera parameters |
H_ERR_SLM_WPATTSIZE |
3963 | ‘pattern_width’ and ‘pattern_height’ do not match the projector parameters in the set ‘camera_setup_model’ |
H_ERR_SLM_WRONGCTYPE |
3964 | Camera type not supported by the structured light model |
H_ERR_SLM_WRONGPTYPE |
3965 | Projector type not supported by the structured light model |
H_ERR_SLM_NO_CSM |
3966 | The structured light model does not contain a camera setup model |
H_ERR_SLM_NO_VERT |
3967 | ‘pattern_orientation’ does not contain vertical orientation |
H_ERR_SLM_NOT_DEC_REC |
3968 | ‘reconstruct_surface_structured_light’ can only be called after ‘decode_structured_light_pattern’ |
H_ERR_SLM_WCAMSIZE |
3969 | Size of correspondence image does not match the camera parameters in the set ‘camera_setup_model’ |
H_ERR_DBOIT |
4050 | Image data management: object is an object tuple |
H_ERR_DBOC |
4051 | Image data management: object has been deleted already |
H_ERR_DBWOID |
4052 | Image data management: wrong object-ID |
H_ERR_DBTC |
4053 | Image data management: object tuple has been deleted already |
H_ERR_DBWTID |
4054 | Image data management: wrong object tuple-ID |
H_ERR_DBTIO |
4055 | Image data management: object tuple is an object |
H_ERR_DBIDNULL |
4056 | Image data management: object-ID is NULL (0) |
H_ERR_WDBID |
4057 | Image data management: object-ID outside the valid range |
H_ERR_DBIC |
4058 | Image data management: access to deleted image |
H_ERR_DBWIID |
4059 | Image data management: access to image with wrong key |
H_ERR_DBRC |
4060 | Image data management: access to deleted region |
H_ERR_DBWRID |
4061 | Image data management: access to region with wrong key |
H_ERR_WCHAN |
4062 | Image data management: wrong value for image channel |
H_ERR_DBITL |
4063 | Image data management: index too big |
H_ERR_DBIUNDEF |
4064 | Image data management: index not defined |
H_ERR_NO_OPENCL |
4100 | No OpenCL available |
H_ERR_OPENCL_ERROR |
4101 | OpenCL Error occurred |
H_ERR_NO_COMPUTE_DEVICES |
4102 | No compute device available |
H_ERR_NO_DEVICE_IMPL |
4103 | No device implementation for this parameter |
H_ERR_OUT_OF_DEVICE_MEM |
4104 | Out of compute device memory |
H_ERR_INVALID_SHAPE |
4105 | Invalid work group shape |
H_ERR_INVALID_DEVICE |
4106 | Invalid compute device |
H_ERR_CUDA_ERROR |
4200 | CUDA Error occurred |
H_ERR_CUDNN_ERROR |
4201 | cuDNN Error occurred |
H_ERR_CUBLAS_ERROR |
4202 | cuBLAS Error occurred |
H_ERR_BATCH_SIZE_NOT_SUPPORTED |
4203 | Setting the batch size on CPUs is not supported. For more information, please read the documentation of the parameter |
H_ERR_CUDA_NOT_AVAILABLE |
4204 | CUDA implementations are not available |
H_ERR_CUDNN_UNSUPPORTED_VERSION |
4205 | Unsupported version of cuDNN |
H_ERR_CUDNN_FEATURE_NOT_SUPPORTED |
4206 | Current configuration requests a feature not supported by cuDNN. Use different input size and/or the batch size! |
H_ERR_CUDA_DRIVER_VERSION |
4207 | Your graphics driver does not support the required CUDA version. Please update your graphics driver! |
H_ERR_TRAINING_UNSUPPORTED |
4301 | Training is unsupported with the selected runtime. |
H_ERR_CPU_INFERENCE_NOT_AVAILABLE |
4302 | CPU based inference is not supported on this platform |
H_ERR_DNNL_ERROR |
4303 | Error occurred in DNNL library |
H_ERR_HAI2_ERROR |
4320 | Error occurred in an AI Accelerator Interface |
H_ERR_HAI2_INVALID_PARAM |
4321 | Invalid parameter for AI Accelerator Interface |
H_ERR_ACL_ERROR |
4400 | Error occurred in ACL library |
H_ERR_VISUALIZATION |
4500 | Internal visualization error |
H_ERR_COLOR_TYPE_UNEXP |
4501 | Unexpected color type |
H_ERR_NUM_COLOR_EXCEEDED |
4502 | Number of color settings exceeded |
H_ERR_WSCN |
5100 | Wrong (logical) window number |
H_ERR_DSCO |
5101 | Error while opening the window |
H_ERR_WWC |
5102 | Wrong window coordinates |
H_ERR_NWA |
5103 | It is not possible to open another window |
H_ERR_DNA |
5104 | Device or operator not available |
H_ERR_UCOL |
5105 | Unknown color |
H_ERR_NWO |
5106 | No window has been opened for desired action |
H_ERR_WFM |
5107 | Wrong filling mode for regions (fill or margin) |
H_ERR_WGV |
5108 | Wrong gray value (0..255) |
H_ERR_WPV |
5109 | Wrong pixel value (use value of get_pixel(P) only) |
H_ERR_WLW |
5110 | Wrong line width (see: query_line_width(Min,Max)) |
H_ERR_WCUR |
5111 | Wrong name of cursor |
H_ERR_WLUT |
5112 | Wrong color table (see: query_lut(Name) |
H_ERR_WDM |
5113 | Wrong representation mode |
H_ERR_WRCO |
5114 | Wrong representation color (see: query_color(List)) |
H_ERR_WRDM |
5115 | Wrong dither matrix (binary image representation) |
H_ERR_WRIT |
5116 | Wrong image transformation (name or image size) |
H_ERR_IPIT |
5117 | Unsuitable image type for image transformation |
H_ERR_WRZS |
5118 | Wrong zooming factor for image transformation |
H_ERR_WRDS |
5119 | Wrong representation mode |
H_ERR_WRDV |
5120 | Wrong code of device |
H_ERR_WWINF |
5121 | Wrong number for father window |
H_ERR_WDEXT |
5122 | Wrong window size |
H_ERR_WWT |
5123 | Wrong window type |
H_ERR_WND |
5124 | No current window has been set |
H_ERR_WRGB |
5125 | Wrong color combination or range (RGB) |
H_ERR_WPNS |
5126 | Wrong number of pixels set |
H_ERR_WCM |
5127 | Wrong value for comprise (object or image) |
H_ERR_LNFS |
5129 | set_lut not valid in child windows |
H_ERR_LOFL |
5130 | Number of concurrent used color tables is too big |
H_ERR_WIDT |
5131 | Wrong device for window dump |
H_ERR_WWDS |
5132 | Wrong window size for window dump |
H_ERR_NDVS |
5133 | System variable DISPLAY (setenv) not defined |
H_ERR_WBW |
5134 | Wrong thickness for window margin |
H_ERR_WDVS |
5135 | System variable DISPLAY has been set wrong (<host>:0.0) |
H_ERR_TMF |
5136 | Too many fonts loaded |
H_ERR_WFN |
5137 | Wrong font name |
H_ERR_WCP |
5138 | No valid cursor position |
H_ERR_NTW |
5139 | Window is not a textual window |
H_ERR_NPW |
5140 | Window is not a image window |
H_ERR_STL |
5141 | String too long or too high |
H_ERR_NSS |
5142 | Too little space in the window rightwards |
H_ERR_NMS |
5143 | Window is not suitable for the mouse |
H_ERR_DWNA |
5144 | Here Windows on a equal machine is permitted only |
H_ERR_WOM |
5145 | Wrong mode while opening a window |
H_ERR_WWM |
5146 | Wrong window mode for operation |
H_ERR_LUTF |
5147 | Operation not possible with fixed pixel |
H_ERR_LUTN8 |
5148 | Color tables for 8 image levels only |
H_ERR_WTCM |
5149 | Wrong mode for pseudo real colors |
H_ERR_WIFTL |
5150 | Wrong pixel value for LUT |
H_ERR_WSOI |
5151 | Wrong image size for pseudo real colors |
H_ERR_HRLUT |
5152 | Error in procedure HRLUT |
H_ERR_WPFSL |
5153 | Wrong number of entries in color table for set_lut |
H_ERR_WPVS |
5154 | Wrong values for image area |
H_ERR_WLPN |
5155 | Wrong line pattern |
H_ERR_WLPL |
5156 | Wrong number of parameters for line pattern |
H_ERR_WNOC |
5157 | Wrong number of colors |
H_ERR_WPST |
5158 | Wrong value for mode of area creation (0,1,2) |
H_ERR_SWNA |
5159 | Spy window is not set (set_spy) |
H_ERR_NSFO |
5160 | No file for spy has been set (set_spy) |
H_ERR_WSPN |
5161 | Wrong parameter output depth (set_spy) |
H_ERR_WIFFD |
5162 | Wrong window size for window dump |
H_ERR_WLUTF |
5163 | Wrong color table: wrong file name or query_lut() |
H_ERR_WLUTE |
5164 | Wrong color table: empty string? |
H_ERR_WLUTD |
5165 | Using this hardware set_lut(‘default’) is allowed only |
H_ERR_CNDP |
5166 | Error while calling online help |
H_ERR_LNPR |
5167 | Row can not be projected |
H_ERR_NFSC |
5168 | Operation is unsuitable using a computer with fixed color table |
H_ERR_NACD |
5169 | Computer represents gray scales only (no colors) |
H_ERR_LUTO |
5170 | LUT of this display is full |
H_ERR_WCC |
5171 | Internal error: wrong color code |
H_ERR_WWATTRT |
5172 | Wrong type for window attribute |
H_ERR_WWATTRN |
5173 | Wrong name for window attribute |
H_ERR_WRSPART |
5174 | Negative height of area (or 0) |
H_ERR_WCSPART |
5175 | Negative width of area (or 0) |
H_ERR_WNCV |
5176 | Window not completely visible |
H_ERR_FONT_NA |
5177 | Font not allowed for this operation |
H_ERR_WDIFFTH |
5178 | Operation not possible (window was created in different thread) |
H_ERR_DEPTH_NOT_STORED |
5179 | Depth was not stored with window |
H_ERR_CHA3 |
5180 | Internal error: only RGB-Mode |
H_ERR_NMWA |
5181 | No more (image-)windows available |
H_ERR_INDEX_NOT_STORED |
5182 | Object index was not stored with window |
H_ERR_PRIM_NO_POINTS |
5183 | Operator does not support primitives without point coordinates |
H_ERR_REMOTE_DESKTOP_SIZE |
5184 | Maximum image size for Windows Remote Desktop exceeded |
H_ERR_NOGL |
5185 | No OpenGL support available |
H_ERR_NODEPTH |
5186 | No depth information available |
H_ERR_OGL_ERROR |
5187 | OpenGL error occurred |
H_ERR_UNSUPPORTED_FBO |
5188 | Required framebuffer object is unsupported |
H_ERR_OGL_HSR_NOT_SUPPORTED |
5189 | OpenGL accelerated hidden surface removal not supported on this machine |
H_ERR_WP_IWP |
5190 | Invalid window parameter |
H_ERR_WP_IWPV |
5191 | Invalid value for window parameter |
H_ERR_UMOD |
5192 | Unknown mode |
H_ERR_ATTIMG |
5193 | No image has been previously attached to window |
H_ERR_OBJ_ATTACHED |
5194 | The drawing object has already been attached to another window |
H_ERR_NVG_WM |
5195 | Invalid value of navigation mode |
H_ERR_FINTERN |
5196 | Internal file error |
H_ERR_FS |
5197 | Error while file synchronization |
H_ERR_FISR |
5198 | Insufficient rights on file |
H_ERR_BFD |
5199 | Bad file descriptor |
H_ERR_FNF |
5200 | File not found |
H_ERR_DWI |
5201 | Error while writing image data (sufficient memory?) |
H_ERR_DWID |
5202 | Error while writing image descriptor (sufficient memory?) |
H_ERR_DRI1 |
5203 | Error while reading image data (format of image too small?) |
H_ERR_DRI2 |
5204 | Error while reading image data (format of image too big?) |
H_ERR_DRID1 |
5205 | Error while reading image descriptor: file too small |
H_ERR_DIMMAT |
5206 | Image matrices are different |
H_ERR_HNF |
5207 | Help file not found (setenv HALCONROOT <HALCON-Homedirectory>) |
H_ERR_XNF |
5208 | Help index not found (setenv HALCONROOT <HALCON-Homedirectory>) |
H_ERR_CNCSI |
5209 | File <standard_input> can not be closed |
H_ERR_CNCSO |
5210 | <standard_output/error> can not be closed |
H_ERR_CNCF |
5211 | File can not be closed |
H_ERR_EDWF |
5212 | Error while writing to file |
H_ERR_NFA |
5213 | Exceeding of maximum number of files |
H_ERR_WFIN |
5214 | Wrong file name |
H_ERR_CNOF |
5215 | Error while opening the file |
H_ERR_WFMO |
5216 | Wrong file mode |
H_ERR_WPTY |
5217 | Wrong type for pixel (e.g. byte) |
H_ERR_WIW |
5218 | Wrong image width (too big?) |
H_ERR_WIH |
5219 | Wrong image height (too big?) |
H_ERR_FTS1 |
5220 | File already exhausted before reading an image |
H_ERR_FTS2 |
5221 | File exhausted before terminating the image |
H_ERR_WDPI |
5222 | Wrong value for resolution (dpi) |
H_ERR_WNOW |
5223 | Wrong output image size (width) |
H_ERR_WNOH |
5224 | Wrong output image size (height) |
H_ERR_WNFP |
5225 | Wrong number of parameter values: format description |
H_ERR_WPNA |
5226 | Wrong parameter name for operator |
H_ERR_WSNA |
5227 | Wrong slot name for parameter |
H_ERR_NPCF |
5228 | Operator class is missing in help file |
H_ERR_WHIF |
5229 | Wrong or inconsistent help/*.idx or help/*.sta |
H_ERR_HINF |
5230 | File help/*.idx not found (setenv HALCONROOT <HALCON-Homedirectory>) |
H_ERR_HSNF |
5231 | File help/*.sta not found (setenv HALCONROOT <HALCON-Homedirectory>) |
H_ERR_ICSF |
5232 | Inconsistent file help/*.sta |
H_ERR_EFNF |
5233 | No explication file (.exp) found |
H_ERR_NFWKEF |
5234 | No file found in known graphic format |
H_ERR_WIFT |
5235 | Wrong graphic format |
H_ERR_ICNF |
5236 | Inconsistent file halcon.num |
H_ERR_WTIFF |
5237 | File not a TIFF file |
H_ERR_WFF |
5238 | Wrong file format |
H_ERR_NOPNM |
5242 | No PNM format |
H_ERR_ICODB |
5243 | Inconsistent or old help file ($HALCONROOT/help) |
H_ERR_INVAL_FILE_ENC |
5244 | Invalid text file encoding |
H_ERR_FNO |
5245 | File not open |
H_ERR_NO_FILES |
5246 | No files in use so far (none opened) |
H_ERR_NORFILE |
5247 | Invalid file format for regions |
H_ERR_RDTB |
5248 | Error while reading region data: Format of region too big |
H_ERR_BINFILE_ENC |
5249 | Setting the encoding is not supported for binary files |
H_ERR_EDRF |
5250 | Error while reading from file |
H_ERR_SNO |
5251 | Serial port not open |
H_ERR_NSA |
5252 | No serial port available |
H_ERR_CNOS |
5253 | Could not open serial port |
H_ERR_CNCS |
5254 | Could not close serial port |
H_ERR_CNGSA |
5255 | Could not get serial port attributes |
H_ERR_CNSSA |
5256 | Could not set serial port attributes |
H_ERR_WRSBR |
5257 | Wrong baud rate for serial connection |
H_ERR_WRSDB |
5258 | Wrong number of data bits for serial connection |
H_ERR_WRSFC |
5259 | Wrong flow control for serial connection |
H_ERR_CNFS |
5260 | Could not flush serial port |
H_ERR_EDWS |
5261 | Error during write to serial port |
H_ERR_EDRS |
5262 | Error during read from serial port |
H_ERR_REG_NOSITEM |
5270 | Serialized item does not contain valid regions |
H_ERR_REG_WRVERS |
5271 | The version of the regions is not supported |
H_ERR_IMG_NOSITEM |
5272 | Serialized item does not contain valid images |
H_ERR_IMG_WRVERS |
5273 | The version of the images is not supported |
H_ERR_XLD_NOSITEM |
5274 | Serialized item does not contain valid XLD objects |
H_ERR_XLD_WRVERS |
5275 | The version of the XLD objects is not supported |
H_ERR_OBJ_NOSITEM |
5276 | Serialized item does not contain valid objects |
H_ERR_OBJ_WRVERS |
5277 | The version of the objects is not supported |
H_ERR_OBJ_UNEXPECTED |
5279 | Unexpected object detected |
H_ERR_FNOTF |
5280 | File has not been opened in text format |
H_ERR_FNOBF |
5281 | File has not been opened in binary file format |
H_ERR_DIRCR |
5282 | Cannot create directory |
H_ERR_DIRRM |
5283 | Cannot remove directory |
H_ERR_GETCWD |
5284 | Cannot determine current directory |
H_ERR_SETCWD |
5285 | Cannot set current directory |
H_ERR_XINIT |
5286 | Missing call to XInitThreads: multithreading support for X11 required |
H_ERR_NFS |
5300 | No image acquisition device opened |
H_ERR_FGWC |
5301 | Image acquisition: wrong color depth |
H_ERR_FGWD |
5302 | Image acquisition: wrong device |
H_ERR_FGVF |
5303 | Image acquisition: determination of video format not possible |
H_ERR_FGNV |
5304 | Image acquisition: no video signal |
H_ERR_UFG |
5305 | Unknown image acquisition device |
H_ERR_FGF |
5306 | Image acquisition: failed grabbing of an image |
H_ERR_FGWR |
5307 | Image acquisition: wrong resolution chosen |
H_ERR_FGWP |
5308 | Image acquisition: wrong image part chosen |
H_ERR_FGWPR |
5309 | Image acquisition: wrong pixel ratio chosen |
H_ERR_FGWH |
5310 | Image acquisition: handle not valid |
H_ERR_FGCL |
5311 | Image acquisition: instance not valid (already closed?) |
H_ERR_FGNI |
5312 | Image acquisition: device cannot be initialized |
H_ERR_FGET |
5313 | Image acquisition: external triggering not supported |
H_ERR_FGLI |
5314 | Image acquisition: wrong camera input line (multiplex) |
H_ERR_FGCS |
5315 | Image acquisition: wrong color space |
H_ERR_FGPT |
5316 | Image acquisition: wrong port |
H_ERR_FGCT |
5317 | Image acquisition: wrong camera type |
H_ERR_FGTM |
5318 | Image acquisition: maximum number of acquisition device classes exceeded |
H_ERR_FGDV |
5319 | Image acquisition: device busy |
H_ERR_FGASYNC |
5320 | Image acquisition: asynchronous grab not supported |
H_ERR_FGPARAM |
5321 | Image acquisition: unsupported parameter |
H_ERR_FGTIMEOUT |
5322 | Image acquisition: timeout |
H_ERR_FGGAIN |
5323 | Image acquisition: invalid gain |
H_ERR_FGFIELD |
5324 | Image acquisition: invalid field |
H_ERR_FGPART |
5325 | Image acquisition: invalid parameter type |
H_ERR_FGPARV |
5326 | Image acquisition: invalid parameter value |
H_ERR_FGFNS |
5327 | Image acquisition: function not supported |
H_ERR_FGIVERS |
5328 | Image acquisition: incompatible interface version |
H_ERR_FGSETPAR |
5329 | Image acquisition: could not set parameter value |
H_ERR_FGGETPAR |
5330 | Image acquisition: could not query parameter setting |
H_ERR_FGPARNA |
5331 | Image acquisition: parameter not available in current configuration |
H_ERR_FGCLOSE |
5332 | Image acquisition: device could not be closed properly |
H_ERR_FGCAMFILE |
5333 | Image acquisition: camera configuration file could not be opened |
H_ERR_FGCALLBACK |
5334 | Image acquisition: callback type not supported |
H_ERR_FGDEVLOST |
5335 | Image acquisition: device lost |
H_ERR_FGABORTED |
5336 | Image acquisition: aborted |
H_ERR_IOTIMEOUT |
5350 | IO: timeout |
H_ERR_IOIVERS |
5351 | IO: incompatible interface version |
H_ERR_IOWH |
5352 | IO: handle not valid |
H_ERR_IODBUSY |
5353 | IO: device busy |
H_ERR_IOIAR |
5354 | IO: insufficient user rights |
H_ERR_IONF |
5355 | IO: device or channel not found |
H_ERR_IOPART |
5356 | IO: invalid parameter type |
H_ERR_IOPARV |
5357 | IO: invalid parameter value |
H_ERR_IOPARNUM |
5358 | IO: invalid number of parameters |
H_ERR_IOPARAM |
5359 | IO: unsupported parameter |
H_ERR_IOPARNA |
5360 | IO: parameter not available in current configuration |
H_ERR_IOFNS |
5361 | IO: function not supported |
H_ERR_IOME |
5362 | IO: maximum number of IO devices or channels exceeded |
H_ERR_IODNA |
5363 | IO: driver of IO device not available |
H_ERR_IOABORTED |
5364 | IO: aborted |
H_ERR_IODATT |
5365 | IO: invalid data type |
H_ERR_IODEVLOST |
5366 | IO: device lost |
H_ERR_IOSETPAR |
5367 | IO: could not set parameter value |
H_ERR_IOGETPAR |
5368 | IO: could not query parameter value |
H_ERR_IOCLOSE |
5369 | IO: device could not be closed properly |
H_ERR_JXR_UNSUPPORTED_FORMAT |
5400 | Image type is not supported |
H_ERR_JXR_INVALID_PIXEL_FORMAT |
5401 | Invalid pixel format |
H_ERR_JXR_INTERNAL_ERROR |
5402 | Internal JPEG-XR error |
H_ERR_JXR_FORMAT_SYNTAX_ERROR |
5403 | Invalid format string |
H_ERR_JXR_TOO_MANY_CHANNELS |
5404 | Maximum number of channels exceeded |
H_ERR_JXR_EC_ERROR |
5405 | Unspecified error in JPEG-XR library |
H_ERR_JXR_EC_BADMAGIC |
5406 | Bad magic number in JPEG-XR library |
H_ERR_JXR_EC_FEATURE_NOT_IMPLEMENTED |
5407 | Feature not implemented in JPEG-XR library |
H_ERR_JXR_EC_IO |
5408 | File read/write error in JPEG-XR library |
H_ERR_JXR_EC_BADFORMAT |
5409 | Invalid file format in JPEG-XR library |
H_ERR_LIB_FILE_CLOSE |
5500 | Error while closing the image file |
H_ERR_LIB_FILE_OPEN |
5501 | Error while opening the image file |
H_ERR_LIB_UNEXPECTED_EOF |
5502 | Premature end of the image file |
H_ERR_IDTL |
5503 | Image dimensions too large for this file format |
H_ERR_ITLHV |
5504 | Image too large for this HALCON version |
H_ERR_TMIO |
5505 | Too many iconic objects for this file format |
H_ERR_FILE_FORMAT_UNSUPPORTED |
5506 | File format is unsupported |
H_ERR_INCONSISTENT_DIMENSIONS |
5507 | All channels must have equal dimensions |
H_ERR_FILE_BAD_SPECIFICATION |
5508 | Wrong specification of the file format |
H_ERR_PCX_NO_PCX_FILE |
5510 | File is no PCX-File |
H_ERR_PCX_UNKNOWN_ENCODING |
5511 | PCX: unknown encoding |
H_ERR_PCX_MORE_THAN_4_PLANES |
5512 | PCX: More than 4 image plains |
H_ERR_PCX_COLORMAP_SIGNATURE |
5513 | PCX: Wrong magic in color table |
H_ERR_PCX_REPEAT_COUNT_SPANS |
5514 | PCX: Wrong number of bytes in span |
H_ERR_PCX_TOO_MUCH_BITS_PIXEL |
5515 | PCX: Wrong number of bits/pixels |
H_ERR_PCX_PACKED_PIXELS |
5516 | PCX: Wrong number of plains |
H_ERR_GIF_NO_GIF_PICTURE |
5520 | File is no GIF-File |
H_ERR_GIF_BAD_VERSION |
5521 | GIF: Wrong version (not 87a/89a) |
H_ERR_GIF_SCREEN_DESCRIPTOR |
5522 | GIF: Wrong descriptor |
H_ERR_GIF_COLORMAP |
5523 | GIF: Wrong color table |
H_ERR_GIF_READ_ERROR_EOF |
5524 | GIF: Premature end of file |
H_ERR_GIF_NOT_ENOUGH_IMAGES |
5525 | GIF: Wrong number of images ‘;’ |
H_ERR_GIF_ERROR_ON_EXTENSION |
5526 | GIF: Wrong image extension ‘!’ |
H_ERR_GIF_LEFT_TOP_WIDTH |
5527 | GIF: Wrong left top width |
H_ERR_GIF_CIRCULAR_TABL_ENTRY |
5528 | GIF: Cyclic index of table |
H_ERR_GIF_BAD_IMAGE_DATA |
5529 | GIF: Wrong image data |
H_ERR_SUN_RASTERFILE_TYPE |
5530 | File is no Sun-Raster-File |
H_ERR_SUN_RASTERFILE_HEADER |
5531 | SUN-Raster: Wrong header |
H_ERR_SUN_COLS |
5532 | SUN-Raster: Wrong image width |
H_ERR_SUN_ROWS |
5533 | SUN-Raster: Wrong image height |
H_ERR_SUN_COLORMAP |
5534 | SUN-Raster: Wrong color map |
H_ERR_SUN_RASTERFILE_IMAGE |
5535 | SUN-Raster: Wrong image data |
H_ERR_SUN_IMPOSSIBLE_DATA |
5536 | SUN-Raster: Wrong type of pixel |
H_ERR_XWD_IMPOSSIBLE_DATA |
5540 | XWD: Wrong type of pixel |
H_ERR_XWD_VISUAL_CLASS |
5541 | XWD: Wrong visual class |
H_ERR_XWD_X10_HEADER |
5542 | XWD: Wrong X10 header |
H_ERR_XWD_X11_HEADER |
5543 | XWD: Wrong X11 header |
H_ERR_XWD_X10_COLORMAP |
5544 | XWD: Wrong X10 colormap |
H_ERR_XWD_X11_COLORMAP |
5545 | XWD: Wrong X11 colormap |
H_ERR_XWD_X11_PIXMAP |
5546 | XWD: Wrong pixmap |
H_ERR_XWD_UNKNOWN_VERSION |
5547 | XWD: unknown version |
H_ERR_XWD_READING_IMAGE |
5548 | XWD: Error while reading an image |
H_ERR_TIF_BAD_INPUTDATA |
5550 | TIFF: Error while reading a file |
H_ERR_TIF_COLORMAP |
5551 | TIFF: Wrong colormap |
H_ERR_TIF_TOO_MANY_COLORS |
5552 | TIFF: Too many colors |
H_ERR_TIF_BAD_PHOTOMETRIC |
5553 | TIFF: Wrong photometric interpretation |
H_ERR_TIF_PHOTOMETRIC_DEPTH |
5554 | TIFF: Wrong photometric depth |
H_ERR_TIF_NO_REGION |
5555 | TIFF: Image is no binary file |
H_ERR_TIF_UNSUPPORTED_FORMAT |
5556 | TIFF: Image format not supported by HALCON |
H_ERR_TIF_BAD_SPECIFICATION |
5557 | TIFF: Wrong specification of the TIFF file format |
H_ERR_TIF_FILE_CORRUPT |
5558 | TIFF: TIFF file is corrupt |
H_ERR_TIF_TAG_UNDEFINED |
5559 | TIFF: A required TIFF tag is missing in the TIFF file |
H_ERR_BMP_NO_BMP_PICTURE |
5560 | File is no BMP-File |
H_ERR_BMP_READ_ERROR_EOF |
5561 | BMP: Premature end of file |
H_ERR_BMP_INCOMPLETE_HEADER |
5562 | BMP: Incomplete header |
H_ERR_BMP_UNKNOWN_FORMAT |
5563 | BMP: Unknown bitmap format |
H_ERR_BMP_UNKNOWN_COMPRESSION |
5564 | BMP: Unknown compression format |
H_ERR_BMP_COLORMAP |
5565 | BMP: Wrong color table |
H_ERR_BMP_WRITE_ERROR |
5566 | BMP: Write error on output |
H_ERR_BMP_NO_REGION |
5567 | BMP: File does not contain a binary image |
H_ERR_JPG_COMP_NUM |
5570 | JPEG: wrong number of components in image |
H_ERR_JPGLIB_UNKNOWN |
5571 | JPEG: unknown error from libjpeg |
H_ERR_JPGLIB_NOTIMPL |
5572 | JPEG: no implemented feature in libjpeg |
H_ERR_JPGLIB_FILE |
5573 | JPEG: file access error in libjpeg |
H_ERR_JPGLIB_TMPFILE |
5574 | JPEG: tmp file access error in libjpeg |
H_ERR_JPGLIB_MEMORY |
5575 | JPEG: memory error in libjpeg |
H_ERR_JPGLIB_INFORMAT |
5576 | JPEG: Error in input image |
H_ERR_PNG_NO_PNG_FILE |
5580 | PNG: File is not a PNG file |
H_ERR_PNG_UNKNOWN_INTERLACE_TYPE |
5581 | PNG: Unknown interlace type |
H_ERR_PNG_UNSUPPORTED_COLOR_TYPE |
5582 | PNG: Unsupported color type |
H_ERR_PNG_NO_REGION |
5583 | PNG: Image is no binary file |
H_ERR_PNG_SIZE_TOO_BIG |
5584 | PNG: Maximal image size exceeded |
H_ERR_TIF_TAG_ACCESS |
5587 | TIFF: Error accessing a TIFF tag |
H_ERR_TIF_TAG_DATATYPE |
5588 | TIFF: Wrong datatype for specified TIFF tag |
H_ERR_TIF_TAG_UNSUPPORTED |
5589 | TIFF: Requested TIFF tag not supported by HALCON |
H_ERR_JP2_CORRUPT |
5590 | JPEG-2000: File corrupt |
H_ERR_JP2_PREC_TOO_HIGH |
5591 | JPEG-2000: Image has more than 24 significant bits |
H_ERR_JP2_ENCODING_ERROR |
5592 | JPEG-2000: Error while encoding |
H_ERR_JP2_SIZE_TOO_BIG |
5593 | JPEG-2000: Maximal image size exceeded |
H_ERR_JP2_INTERNAL_ERROR |
5594 | JPEG-2000: Could not initialize library |
H_ERR_HOBJ_NOT_ONLY_IMAGES |
5599 | HOBJ: File does not contain only images |
H_ERR_SOCKET_BLOCK |
5600 | Socket can not be set to block |
H_ERR_SOCKET_UNBLOCK |
5601 | Socket can not be set to unblock |
H_ERR_SOCKET_NO_CPAR |
5602 | Received data is no tuple |
H_ERR_SOCKET_NO_IMAGE |
5603 | Received data is no image |
H_ERR_SOCKET_NO_RL |
5604 | Received data is no region |
H_ERR_SOCKET_NO_XLD |
5605 | Received data is no xld object |
H_ERR_SOCKET_READ_DATA_FAILED |
5606 | Error while reading from socket |
H_ERR_SOCKET_WRITE_DATA_FAILED |
5607 | Error while writing to socket |
H_ERR_SOCKET_WRONG_BYTE_NUMBER |
5608 | Illegal number of bytes with get_rl |
H_ERR_SOCKET_BUFFER_OVERFLOW |
5609 | Buffer overflow in read_data |
H_ERR_SOCKET_CANT_ASSIGN_FD |
5610 | Socket can not be created |
H_ERR_SOCKET_CANT_BIND |
5611 | Bind on socket failed |
H_ERR_SOCKET_CANT_GET_PORTNUMBER |
5612 | Socket information is not available |
H_ERR_SOCKET_CANT_LISTEN |
5613 | Socket cannot listen for incoming connections |
H_ERR_SOCKET_CANT_ACCEPT |
5614 | Connection could not be accepted |
H_ERR_SOCKET_CANT_CONNECT |
5615 | Connection request failed |
H_ERR_SOCKET_GETHOSTBYNAME |
5616 | Hostname could not be resolved |
H_ERR_SOCKET_ILLEGAL_TUPLE_TYPE |
5618 | Unknown tuple type on socket |
H_ERR_SOCKET_TIMEOUT |
5619 | Timeout occurred on socket |
H_ERR_SOCKET_NA |
5620 | No more sockets available |
H_ERR_SOCKET_NI |
5621 | Socket is not initialized |
H_ERR_SOCKET_OOR |
5622 | Invalid socket |
H_ERR_SOCKET_IS |
5623 | Socket is NULL |
H_ERR_SOCKET_DATA_TOO_LARGE |
5624 | Received data type is too large |
H_ERR_SOCKET_WRONG_TYPE |
5625 | Wrong socket protocol |
H_ERR_SOCKET_NO_PACKED_DATA |
5626 | Received data does not contain packed data |
H_ERR_SOCKET_PARAM_FAILED |
5627 | Error when handling the parameter |
H_ERR_SOCKET_FORMAT_MISMATCH |
5628 | Format specification does not match the data |
H_ERR_SOCKET_INVALID_FORMAT |
5629 | Invalid format specification |
H_ERR_SOCKET_NO_SERIALIZED_ITEM |
5630 | Received data is no serialized item |
H_ERR_SOCKET_TLS_CONTEXT |
5631 | Could not initialize TLS library |
H_ERR_SOCKET_TLS_CERT_KEY |
5632 | Invalid TLS Certificate or private Key |
H_ERR_SOCKET_TLS_HANDSHAKE |
5633 | TLS handshake failed |
H_ERR_XLD_DATA_TOO_LARGE |
5678 | XLD object data can only be read by HALCON XL |
H_ERR_ARCINFO_TOO_MANY_XLDS |
5700 | Too many contours/polygons for this file format |
H_ERR_QUAT_WRONG_VERSION |
5750 | The version of the quaternion is not supported |
H_ERR_QUAT_NOSITEM |
5751 | Serialized item does not contain a valid quaternion |
H_ERR_HOM_MAT2D_WRONG_VERSION |
5752 | The version of the homogeneous matrix is not supported |
H_ERR_HOM_MAT2D_NOSITEM |
5753 | Serialized item does not contain a valid homogeneous matrix |
H_ERR_HOM_MAT3D_WRONG_VERSION |
5754 | The version of the homogeneous 3D matrix is not supported |
H_ERR_HOM_MAT3D_NOSITEM |
5755 | Serialized item does not contain a valid homogeneous 3D matrix |
H_ERR_TUPLE_WRONG_VERSION |
5756 | The version of the tuple is not supported |
H_ERR_TUPLE_NOSITEM |
5757 | Serialized item does not contain a valid tuple |
H_ERR_TUPLE_DTLFTHV |
5758 | Number too big for a string to number conversion (overflow) |
H_ERR_POSE_WRONG_VERSION |
5759 | The version of the camera parameters (pose) is not supported |
H_ERR_POSE_NOSITEM |
5760 | Serialized item does not contain valid camera parameters (pose) |
H_ERR_CAM_PAR_WRONG_VERSION |
5761 | The version of the internal camera parameters is not supported |
H_ERR_CAM_PAR_NOSITEM |
5762 | Serialized item does not contain valid internal camera parameters |
H_ERR_DUAL_QUAT_WRONG_VERSION |
5763 | The version of the dual quaternion is not supported |
H_ERR_DUAL_QUAT_NOSITEM |
5764 | Serialized item does not contain a valid dual quaternion |
H_ERR_IMGSRC_FAIL |
5800 | Image source operation failed - unknown reason |
H_ERR_IMGSRC_LOGIC |
5801 | Image source operation failed - wrong internal assumptions |
H_ERR_IMGSRC_NOT_IMPLEMENTED |
5802 | Image source functionality is not implemented |
H_ERR_IMGSRC_INCOMPATIBLE_VERSION |
5803 | Image source plugin version incompatible |
H_ERR_IMGSRC_GENTL_ERROR |
5804 | Unhandled exception was triggered by a GenTL Producer |
H_ERR_IMGSRC_GENAPI_ERROR |
5805 | Unhandled exception was triggered by the GenICam GenAPI |
H_ERR_IMGSRC_RES_INIT_FAIL |
5806 | Image source resource could not be initialized |
H_ERR_IMGSRC_RES_NOT_INITIALIZED |
5807 | Image source resource not initialized |
H_ERR_IMGSRC_MOD_REQUEST_AMBIGUOUS |
5808 | Requested image source module is not unique |
H_ERR_IMGSRC_MOD_NOT_FOUND |
5809 | Image source module not found |
H_ERR_IMGSRC_PARAM_NOT_FOUND |
5810 | Image source parameter not found |
H_ERR_IMGSRC_PARAM_WRONG_VALUE |
5811 | Image source parameter - wrong value provided |
H_ERR_IMGSRC_PARAM_WRONG_VALUE_TYPE |
5812 | Image source parameter - wrong type provided |
H_ERR_IMGSRC_PARAM_VAL_NOT_READABLE |
5813 | Image source parameter - error while reading the value |
H_ERR_IMGSRC_PARAM_VAL_NOT_WRITABLE |
5814 | Image source parameter - error while writing the value |
H_ERR_IMGSRC_PARAM_PROP_NOT_AVAILABLE |
5815 | Image source parameter - property not available |
H_ERR_IMGSRC_COMMAND_TIMEOUT |
5816 | Command execution not finished within the desired timeout |
H_ERR_IMGSRC_WRONG_STATE |
5817 | Image source operation failed - wrong internal state |
H_ERR_IMGSRC_FETCH_TIMEOUT |
5818 | No images received within the configured timeout |
H_ERR_IMGSRC_FETCH_ABORT |
5819 | Waiting for images aborted |
H_ERR_IMGSRC_CONVERSION_FAILED |
5820 | Converting image data failed |
H_ERR_NP |
6000 | Access to undefined memory area |
H_ERR_MEM |
6001 | Not enough memory available |
H_ERR_ICM |
6002 | Memory partition on heap has been overwritten |
H_ERR_WMS |
6003 | HAlloc: 0 bytes requested |
H_ERR_NOTMP |
6004 | Tmp-memory management: Call freeing memory although nothing had been allocated |
H_ERR_TMPNULL |
6005 | Tmp-memory management: Null pointer while freeing |
H_ERR_CNFMEM |
6006 | Tmp-memory management: could not find memory element |
H_ERR_WMT |
6007 | Memory management: wrong memory type allocated |
H_ERR_MEM_VID |
6021 | Not enough video memory available |
H_ERR_IAD |
6040 | System parameter for memory-allocation inconsistent |
H_ERR_NRA |
6041 | No memory block allocated at last |
H_ERR_INVALID_ALIGN |
6042 | Invalid alignment |
H_ERR_NULL_PTR |
6043 | Function was given a NULL pointer as input |
H_ERR_CP_FAILED |
6500 | Process creation failed |
H_ERR_WOCPI |
7000 | Wrong index for output control parameter |
H_ERR_WOCPVN |
7001 | Wrong number of values: output control parameter (see: HPut*Par) |
H_ERR_WOCPT |
7002 | Wrong type: output control parameter (see: HPut*Par) |
H_ERR_WKT |
7003 | Wrong data type for object key (input objects) |
H_ERR_IOOR |
7004 | Range for integer had been passed |
H_ERR_IHV |
7005 | Inconsistent HALCON version |
H_ERR_NISS |
7006 | Not enough memory for strings allocated |
H_ERR_PROC_NULL |
7007 | Internal error: Proc is NULL |
H_ERR_UNKN |
7105 | Unknown symbolic object key (input objects) |
H_ERR_WOON |
7200 | Wrong number of output object parameter |
H_ERR_OTSE |
7400 | System error: output type <string> expected |
H_ERR_OTLE |
7401 | System error: output type <long> expected |
H_ERR_OTFE |
7402 | System error: output type <float> expected |
H_ERR_OPINP |
7403 | Object parameter is a zero pointer (‘_’ not allowed) |
H_ERR_TWC |
7404 | Tuple had been deleted; values are not valid any more |
H_ERR_CNN_DATA |
7701 | CNN: Internal data error |
H_ERR_CNN_MEM |
7702 | CNN: Invalid memory type |
H_ERR_CNN_IO_INVALID |
7703 | CNN: Invalid data serialization |
H_ERR_CNN_IMPL_NOT_AVAILABLE |
7704 | CNN: Implementation not available |
H_ERR_CNN_NUM_INPUTS_INVALID |
7705 | Wrong number of input data |
H_ERR_CNN_IMPL_INVALID |
7706 | CNN: Invalid implementation type selected |
H_ERR_CNN_TRAINING_NOT_SUP |
7707 | CNN: Training is not supported by the current environment |
H_ERR_CNN_GPU_REQUIRED |
7708 | This operation requires a GPU with certain minimal hardware specifications for the selected device (See installation guide) |
H_ERR_CNN_CUDA_LIBS_MISSING |
7709 | This operation requires a suitable GPU and compatible drivers for the selected device (See installation guide) |
H_ERR_OCR_CNN_RE |
7710 | OCR File: Error while reading classifier |
H_ERR_OCR_CNN_WGPN |
7711 | Wrong generic parameter name |
H_ERR_OCR_CNN_EXCLUSIV_PARAM |
7712 | One of the generic parameters returns several values and has to be used exclusively |
H_ERR_CNN_WGPN |
7713 | Wrong generic parameter name |
H_ERR_CNN_INVALID_LABELS |
7714 | Invalid label |
H_ERR_OCR_CNN_FILE_WRONG_VERSION |
7715 | OCR File: Wrong file version |
H_ERR_CNN_MULTIPLE_CLASSES |
7716 | Invalid classes: At least one class occurs twice |
H_ERR_CNN_CUBLAS_LIBS_MISSING |
7717 | This operation requires the cuBLAS library for the selected device (See installation guide) |
H_ERR_CNN_CUDNN_LIBS_MISSING |
7718 | This operation requires the cuDNN library for the selected device (See installation guide) |
H_ERR_OCR_FNF_FIND_TEXT_SUPPORT |
7719 | File ‘find_text_support.hotc’ not found. Please place this file in the ocr subdirectory of the root directory of the HALCON installation or in the current working directory |
H_ERR_CNN_TRAINING_FAILED |
7720 | Training step failed. This might be caused by unsuitable hyperparameters |
H_ERR_CNN_NO_PRETRAINED_WEIGHTS |
7721 | Weights of the pretrained network have been overwritten and cannot be restored |
H_ERR_CNN_INVALID_INPUT_SIZE |
7722 | One or more input dimensions are too small for the network |
H_ERR_CNN_RESULT_NOT_AVAILABLE |
7723 | The requested results are not available for this network |
H_ERR_CNN_INVALID_INPUT_DEPTH |
7724 | The number of channels of the input image must be either 1 or 3 |
H_ERR_CNN_DEPTH_NOT_AVAILABLE |
7725 | The number of channels of the input image cannot be set |
H_ERR_CNN_INVALID_BATCH_SIZE |
7726 | Batch size smaller than subbatch size |
H_ERR_CNN_INVALID_PARAM_SPEC |
7727 | Invalid parameter specification |
H_ERR_CNN_EXCEEDS_MAX_MEM |
7728 | Internal memory management limit exceeded |
H_ERR_CNN_BATCH_SIZE_OVERFLOW |
7729 | The required memory exceeds internal limits. This can be caused by very high values of batch size |
H_ERR_CNN_INVALID_IMAGE_SIZE |
7730 | The size of input image for the model is invalid. Width and height must be divisible through the level of the last backbone layer |
H_ERR_CNN_INVALID_LAYER_PARAM_VALUE |
7731 | The parameter value is invalid for this graph node. |
H_ERR_CNN_INVALID_LAYER_PARAM_NUM |
7732 | The number of parameters is invalid for this graph node. |
H_ERR_CNN_INVALID_LAYER_PARAM_TYPE |
7733 | The parameter type is invalid for this graph node. |
H_ERR_CNN_NUM_OUTPUTS_INVALID |
7734 | Wrong number of output data |
H_ERR_CNN_INVALID_SHAPE |
7735 | CNN: Invalid shape of input |
H_ERR_CNN_INVALID_INPUT_DATA |
7736 | CNN: Invalid input data |
H_ERR_CNN_CUDNN_CTC_LOSS_BUGGY |
7737 | CNN: For variable input lengths the ctc loss layer only computes correct gradients if the used cuDNN version is >= 7.6.3. Please upgrade cuDNN or do not use variable input lengths. |
H_ERR_CNN_INVALID_PADDING |
7738 | CNN: Invalid padding |
H_ERR_CNN_IO_INVALID_LAYER_TYPE |
7740 | CNN: Invalid layer type serialization |
H_ERR_CNN_INFERENCE_FAILED |
7741 | CNN: Inference failed. This might be caused by bad weights created by unsuitable hyperparameters during the training |
H_ERR_CNN_RUNTIME_FAILED |
7742 | CNN: Runtime unsupported on this machine |
H_ERR_GRAPH_INTERNAL |
7751 | Graph: Internal error |
H_ERR_GRAPH_IO_INVALID |
7752 | Graph: Invalid data serialization |
H_ERR_GRAPH_INVALID_INDEX |
7753 | Graph: Invalid index |
H_ERR_CNNGRAPH_QUANTIZATION_INTERNAL |
7759 | Graph: Internal quantization error |
H_ERR_CNNGRAPH_INTERNAL |
7760 | CNN graph: Internal error |
H_ERR_CNNGRAPH_IO_INVALID |
7761 | CNN graph: Invalid data serialization |
H_ERR_CNNGRAPH_LAYER_INVALID |
7762 | CNN graph: Invalid layer specification |
H_ERR_CNNGRAPH_NOINIT |
7763 | CNN graph: Graph not initialized properly |
H_ERR_CNNGRAPH_INVALID_MEM |
7764 | CNN graph: Invalid memory type |
H_ERR_CNNGRAPH_INVALID_NUML |
7765 | CNN graph: Invalid number of layers |
H_ERR_CNNGRAPH_INVALID_IDX |
7766 | CNN graph: Invalid index |
H_ERR_CNNGRAPH_SPEC_STATUS |
7767 | CNN graph: Invalid specification state |
H_ERR_CNNGRAPH_NOCHANGE |
7768 | CNN graph: Graph is not allowed to be changed after initialization |
H_ERR_CNNGRAPH_PREPROC |
7769 | CNN graph: Missing preprocessing |
H_ERR_CNNGRAPH_DEGREE |
7770 | CNN graph: Invalid vertex degree |
H_ERR_CNNGRAPH_OUTSHAPE |
7771 | CNN graph: Invalid output shape |
H_ERR_CNNGRAPH_SPEC |
7772 | CNN graph: Invalid specification |
H_ERR_CNNGRAPH_DEF |
7773 | CNN graph: Invalid graph definition |
H_ERR_CNNGRAPH_NO_CLASS_CHANGE |
7774 | CNN-Graph: Architecture not suitable for the adaption of the number of output classes |
H_ERR_CNNGRAPH_NO_IMAGE_RESIZE |
7775 | CNN-Graph: Architecture not suitable for the adaption of the image size |
H_ERR_CNNGRAPH_AUX_INDEX_OOB |
7776 | CNN-Graph: Auxiliary output index out of bounds. |
H_ERR_CNNGRAPH_AUX_SPEC |
7777 | CNN-Graph: Invalid graph definition. Probably the auxiliary outputs of a layer have not been connected with corresponding aux selection layers (SelectAux) or at least one aux output has not been specified during model creation (create_dl_model call). |
H_ERR_CNNGRAPH_LAYER_UNSUPPORTED |
7778 | CNN-Graph: At least one layer is unsupported for the selected runtime or operation |
H_ERR_DL_INTERNAL |
7779 | DL: Internal Error |
H_ERR_DL_FILE_READ |
7780 | DL: Error while reading file |
H_ERR_DL_FILE_WRITE |
7781 | DL: Error while writing file |
H_ERR_DL_FILE_WRONG_VERSION |
7782 | DL: Wrong file version |
H_ERR_DL_INPUTS_MISSING |
7783 | DL: Inputs missing in input dict |
H_ERR_DL_INPUT_WRONG_BS |
7784 | DL: Inputs have incorrect batch size |
H_ERR_DL_INVALID_NAME |
7785 | DL: Invalid layer name |
H_ERR_DL_DUPLICATE_NAME |
7786 | DL: Duplicate layer name |
H_ERR_DL_INVALID_OUTPUT |
7787 | DL: Invalid output layer |
H_ERR_DL_PARAM_NOT_AVAILABLE |
7788 | DL: Parameter is not available for this model |
H_ERR_DL_INPUT_WRONG_LENGTH |
7789 | DL: Tuple inputs have incorrect length |
H_ERR_DL_INPUT_WRONG_TYPE |
7790 | DL: Tuple inputs have incorrect type |
H_ERR_DL_INPUT_WRONG_VALUES |
7791 | DL: Some inputs have incorrect values |
H_ERR_DL_CLASS_IDS_NOT_UNIQUE |
7792 | DL: Some class ids are not unique |
H_ERR_DL_CLASS_IDS_INVALID |
7793 | DL: Some class ids have incorrect values.The expected value range is [0, 65534] |
H_ERR_DL_CLASS_IDS_INVALID_CONV |
7794 | DL: Input data of class id conversion is invalid |
H_ERR_DL_TYPE_ALREADY_DEFINED |
7795 | DL: Type is already defined so it cannot be changed |
H_ERR_DL_NO_INFERENCE_INPUTS |
7796 | DL: Cannot identify inference inputs |
H_ERR_DL_CLASS_IDS_INVALID_OVERLAP |
7797 | DL: Class ids must not overlap with ignore class ids |
H_ERR_DL_WRONG_OUTPUT_LAYER_NUM |
7798 | DL: Tuple of output layers has incorrect length |
H_ERR_DL_WRONG_BS_MULTIPLIER |
7799 | DL: Batch size multiplier needs to be greater than 0 |
H_ERR_DL_INPUT_WRONG_BS_WITH_MULTIPLIER |
7800 | DL: Inputs have incorrect batch size. The number of needed inputs is defined by batch_size * batch_size_multiplier |
H_ERR_DL_READ_ONNX |
7801 | Error occurred while reading an ONNX model |
H_ERR_DL_CLASS_IDS_MISSING |
7802 | DL: Model has no class ids |
H_ERR_DL_WRITE_ONNX |
7803 | Error occurred while writing an ONNX model |
H_ERR_DL_ONNX_LOADER |
7804 | Libprotobuf for ONNX could not be loaded |
H_ERR_DL_FPN_SCALES |
7810 | DL: min_level or max_level not compatible with backbone |
H_ERR_DL_FPN_INVALID_BACKBONE |
7811 | DL: Backbone unusable for FPN creation |
H_ERR_DL_FPN_INVALID_FEATURE_MAP_SIZE |
7812 | DL: Image size not compatible with backbone |
H_ERR_DL_FPN_INVALID_LEVELS |
7813 | DL: Invalid FPN-levels. |
H_ERR_DL_ANCHOR |
7820 | DL: Internal error with anchors |
H_ERR_DL_DETECTOR_INVALID_PARAM |
7821 | DL: Invalid detector parameter |
H_ERR_DL_DETECTOR_INVALID_PARAM_VALUE |
7822 | DL: Invalid detector parameter value |
H_ERR_DL_DETECTOR_INVALID_DOCKING_LAYER |
7823 | DL: Invalid backbone docking layer names |
H_ERR_DL_DETECTOR_INVALID_INSTANCE_TYPE |
7824 | DL: Invalid instance type |
H_ERR_DL_NODE_MISSING_PARAM_NAME |
7830 | DL-Node: Missing generic parameter ‘name’. Please specify a layer name. |
H_ERR_DL_NODE_GENPARAM_NAME_NOT_ALLOWED |
7831 | DL-Node: No generic parameter ‘name’ allowed for this node. |
H_ERR_DL_NODE_INVALID_SPEC |
7832 | DL-Node: Invalid layer specification. |
H_ERR_DL_NODE_DUPLICATE_EDGE |
7833 | DL-Node: There can only be one direct connection between two layers. |
H_ERR_DL_SOLVER_INVALID_TYPE |
7840 | DL: Invalid solver type. |
H_ERR_DL_SOLVER_INVALID_UPDATE_FORMULA |
7841 | DL: Invalid solver update formula. |
H_ERR_DL_HEATMAP_UNSUPPORTED_RUNTIME |
7850 | DL: The heatmap is unsupported with the selected runtime |
H_ERR_DL_HEATMAP_UNSUPPORTED_MODEL_TYPE |
7851 | DL: The heatmap is not available for the selected model type |
H_ERR_DL_HEATMAP_UNSUPPORTED_METHOD |
7852 | DL: The selected heatmap method is not supported |
H_ERR_DL_HEATMAP_WRONG_TARGET_CLASS_ID |
7853 | DL: The selected target class is not available. Please choose a valid class id. |
H_ERR_DL_GCAD_NETWORK_NOT_AVAILABLE |
7870 | DL: GC anomaly detection model network is not available. |
H_ERR_DL_ANOMALY_MODEL_INTERNAL |
7880 | DL: Anomaly detection model internal error. |
H_ERR_DL_ANOMALY_MODEL_UNTRAINED |
7881 | DL: Anomaly detection model is not yet trained. |
H_ERR_DL_ANOMALY_MODEL_TRAINING_FAILED |
7882 | DL: Training of anomaly detection model failed. |
H_ERR_DL_ANOMALY_MODEL_PARAM_TRAINED |
7883 | DL: Unable to set parameter in a trained anomaly detection model. |
H_ERR_DL_ANOMALY_MODEL_RESIZE |
7884 | DL: Changing the model input size failed for the specified parameter value. |
H_ERR_DL_ANOMALY_MODEL_DEPTH |
7885 | DL: Model input depth is not supported. |
H_ERR_DL_ANOMALY_MODEL_INPUT_DOMAIN |
7886 | DL: The domain of the input image is empty. |
H_ERR_DEEP_OCR_MODEL_INTERNAL |
7890 | Deep OCR internal error. |
H_ERR_DEEP_OCR_MODEL_INVALID_ALPHABET |
7891 | Alphabet cannot contain items with a string length greater than one. |
H_ERR_DEEP_OCR_MODEL_INVALID_ALPHABET_IDX |
7892 | Out of bounds indexing into alphabet. |
H_ERR_DEEP_OCR_MODEL_INVALID_MODEL_TYPE |
7893 | The type of the given Deep OCR model component is not allowed. |
H_ERR_DEEP_OCR_MODEL_NOT_AVAILABLE |
7894 | The Deep OCR model component is not available. |
H_ERR_DEEP_OCR_MODEL_INVALID_ALPHABET_MAPPING_NO_ALPHABET |
7895 | It is not possible to specify a mapping because there is no internal alphabet specified. |
H_ERR_DEEP_OCR_MODEL_INVALID_ALPHABET_MAPPING_IDX |
7896 | Out of bounds index into internal alphabet given in mapping. |
H_ERR_DEEP_OCR_MODEL_INVALID_ALPHABET_MAPPING_LEN |
7897 | The length of the mapping and the length of the internal alphabet need to be the same. |
H_ERR_DEEP_OCR_MODEL_FILE_NOT_FOUND |
7898 | The Deep OCR model file could not be found. Deep OCR requires the installation of Deep Learning. Please make sure it is installed correctly (see Installation Guide). |
H_ERR_DEEP_OCR_MODEL_UNKNOWN_CHAR |
7899 | Some character is not part of the internal alphabet. |
H_ERR_DEEP_OCR_MODEL_INVALID_WORD_LENGTH |
7900 | The given word length is invalid. |
H_ERR_DEEP_OCR_MODEL_ALPHABET_NOT_UNIQUE |
7901 | The given alphabet is not a unique list of characters |
H_ERR_DL_MODEL_APPLY_NO_DEF_OUTPUTS |
7910 | DL: The model architecture does not allow to specify default outputs |
H_ERR_DL_MODEL_UNSUPPORTED_GENPARAM |
7911 | DL: Unsupported generic parameter |
H_ERR_DL_MODEL_OPERATOR_UNSUPPORTED |
7912 | DL: Operator does not support the model type |
H_ERR_DL_MODEL_RUNTIME |
7913 | DL: Requested runtime cannot be set |
H_ERR_DL_MODEL_UNSUPPORTED_GENVALUE |
7914 | DL: Unsupported generic parameter value |
H_ERR_DL_MODEL_INVALID_NUM_SAMPLES |
7915 | DL: Invalid number of samples |
H_ERR_DL_MODEL_CONVERTED_PARAM |
7916 | DL: Parameter unsupported for converted model |
H_ERR_DL_MODEL_CONVERTED_UNSUPPORTED |
7917 | DL: Unsupported operation on converted model |
H_ERR_DL_MODEL_OPTIMIZE_OP_ONLY |
7918 | DL: The model supports this device only with optimize_dl_model_for_inference |
H_ERR_DL_INVALID_DATASET |
7925 | DL: The given dataset is incorrect |
H_ERR_DL_INVALID_SAMPLE_INDEX |
7926 | DL: Invalid sample index |
H_ERR_DL_TRANSFORM_INVALID_NAME |
7931 | DL: Invalid transform name |
H_ERR_DL_TRANSFORM_PARAM_NOT_AVAILABLE |
7932 | DL: Parameter is not available for this transform |
H_ERR_DL_TRANSFORM_PIPELINE_PARAM_NOT_AVAILABLE |
7933 | DL: Parameter is not available for a transform pipeline |
H_ERR_CNN_IO_INVALID_TRANSFORM_TYPE |
7934 | CNN: Invalid transform type serialization |
H_ERR_DEEP_COUNTING_NOT_PREPARED |
7940 | The Deep Counting model is not prepared for applying on images |
H_ERR_DEEP_COUNTING_UNSUPPORTED_BACKBONE |
7941 | The type of the backbone for Deep Counting model must be of the model type counting |
H_ERR_DEEP_COUNTING_PREPARE_UNSUPPORTED |
7942 | The usage of preparing a Deep Counting model is not supported in this context |
H_ERR_DEEP_COUNTING_NO_BACKBONE |
7943 | Deep Counting model has no backbone |
H_ERR_DL_DEVICE_UNSUPPORTED_PRECISION |
7960 | DL: Unsupported device precision |
H_ERR_DL_CONTINUAL_LEARNING_UNSUPPORTED_MODEL |
7970 | DL: Unsupported model for continual learning |
H_ERR_DL_CONTINUAL_LEARNING_MODEL_NOT_INITIALIZED |
7971 | DL: Model has not been initialized for continual learning |
H_ERR_DL_CONTINUAL_LEARNING_MODEL_ALREADY_INITIALIZED |
7972 | DL: Model has already been initialized for continual learning |
H_ERR_DL_CONTINUAL_LEARNING_INFERENCE_FAILED |
7973 | DL: Continual learning inference failed |
H_ERR_DL_CONTINUAL_LEARNING_INVALID |
7974 | Operation invalidates continual learning functionality. |
H_ERR_DL_CONTINUAL_LEARNING_INSUFFICIENT_SAMPLE_DIVERSITY |
7975 | DL: Insufficient diverse samples for Continual learning. |
H_ERR_DL_PRUNING_WRONG_DATA |
7980 | DL: Given pruning data and model are not compatible |
H_ERR_DL_PRUNING_UNSUPPORTED_BY_CNN |
7981 | DL: The model architecture does not support pruning |
H_ERR_DL_OOD_UNSUPPORTED_MODEL_TYPE |
7985 | DL: Invalid model type for out-of-distribution detection |
H_ERR_DL_OOD_INSUFFICIENT_SAMPLE_DIVERSITY |
7986 | DL: Insufficient diverse samples for fitting out-of-distribution detection |
H_ERR_DL_OOD_INTERNAL_ERROR |
7987 | Internal error in the calculation of the out-of-distribution detection |
H_ERR_DL_OOD_INVALID |
7988 | Operation invalidates out-of-distribution detection. |
H_ERR_DL_MODULE_NOT_LOADED |
7990 | DL: The DL module (libhalcondl.so/halcondl.dll) could not be loaded |
H_ERR_WPRN |
8000 | Unknown operator name |
H_ERR_RCNA |
8001 | register_comp_used is not activated (see set_system) |
H_ERR_WPC |
8002 | Unknown operator class |
H_ERR_ORMF |
8101 | convol/mask: error while opening the file |
H_ERR_EOFRMF |
8102 | convol/mask: premature end of file |
H_ERR_CVTRMF |
8103 | convol/mask: conversion error |
H_ERR_LCNRMF |
8104 | convol/mask: wrong row-/column number |
H_ERR_WCOVRMF |
8105 | convol/mask: mask size overflow |
H_ERR_NEOFRMF |
8106 | convol/mask: too many elements entered |
H_ERR_WRRA |
8107 | convol: wrong margin type |
H_ERR_MCN0 |
8108 | convol: no mask object has got empty region |
H_ERR_WF0 |
8110 | convol: Weight factor is 0 |
H_ERR_NWC |
8111 | convol: inconsistent number of weights |
H_ERR_WRRV |
8112 | rank: wrong rank value |
H_ERR_ROVFL |
8113 | convol/rank: error while handling margin |
H_ERR_EWPMF |
8114 | Error while parsing filter mask file |
H_ERR_WNUMM |
8120 | Wrong number of coefficients for convolution (sigma too big?) |
H_ERR_WBEDN |
8200 | No valid ID for data set |
H_ERR_NBEDA |
8201 | No data set active (set_bg_esti) |
H_ERR_BEDNAU |
8202 | ID already used for data set (is not possible) |
H_ERR_NBEDC |
8204 | No data set created (create_bg_esti) |
H_ERR_NTM |
8205 | Not possible to pass an object list |
H_ERR_WISBE |
8206 | Image has other size than the background image in data set |
H_ERR_UDNSSBE |
8207 | Up-date-region is bigger than background image |
H_ERR_SNBETS |
8208 | Number of statistic data sets is too small |
H_ERR_WAMBE |
8209 | Wrong value for adapt mode |
H_ERR_WFMBE |
8210 | Wrong value for frame mode |
H_ERR_PE_NPCTS |
8250 | Number of point correspondences too small |
H_ERR_PE_INVMET |
8251 | Invalid pose estimation method |
H_ERR_OCR_MEM1 |
8300 | Maximum number of fonts exceeded |
H_ERR_OCR_WID |
8301 | Wrong ID (Number) for font |
H_ERR_OCR1 |
8302 | OCR internal error: wrong ID |
H_ERR_OCR_NNI |
8303 | OCR not initialized: no font was read in |
H_ERR_OCR_NAI |
8304 | No font activated |
H_ERR_OCR_WTP |
8305 | OCR internal error: wrong threshold in angle determination |
H_ERR_OCR_WF |
8306 | OCR internal error: wrong attribute |
H_ERR_OCR_READ |
8307 | The version of the OCR classifier is not supported |
H_ERR_OCR_NODES |
8308 | OCR File: inconsistent number of nodes |
H_ERR_OCR_EOF |
8309 | OCR File: File too short |
H_ERR_OCR_INC1 |
8310 | OCR: internal error 1 |
H_ERR_OCR_INC2 |
8311 | OCR: internal error 2 |
H_ERR_WOCRTYPE |
8312 | Wrong type of OCR tool (no ‘box’ or ‘net’) |
H_ERR_OCR_TRF |
8313 | The version of the OCR training characters is not supported |
H_ERR_TRF_ITL |
8314 | Image too large for training file |
H_ERR_TRF_RTL |
8315 | Region too large for training file |
H_ERR_TRF_PT |
8316 | Protected training file |
H_ERR_TRF_WPW |
8317 | Wrong password for protected training file |
H_ERR_OCR_NOSITEM |
8318 | Serialized item does not contain a valid OCR classifier |
H_ERR_TRF_CON_EIO |
8319 | OCR training file concatenation failed: identical input and output files |
H_ERR_OCR_MLP_NOCLASSFILE |
8320 | Invalid file format for MLP classifier |
H_ERR_OCR_MLP_WRCLASSVERS |
8321 | The version of the MLP classifier is not supported |
H_ERR_OCR_MLP_NOSITEM |
8322 | Serialized item does not contain a valid MLP classifier |
H_ERR_OCR_SVM_NOCLASSFILE |
8330 | Invalid file format for SVM classifier |
H_ERR_OCR_SVM_WRCLASSVERS |
8331 | The version of the SVM classifier is not supported |
H_ERR_OCR_SVM_NOSITEM |
8332 | Serialized item does not contain a valid SVM classifier |
H_ERR_OCR_KNN_NOCLASSFILE |
8333 | Invalid file format for k-NN classifier |
H_ERR_OCR_KNN_NOSITEM |
8334 | Serialized item does not contain a valid k-NN classifier |
H_ERR_OCR_CNN_NOCLASSFILE |
8335 | Invalid file format for CNN classifier |
H_ERR_OCR_CNN_WRCLASSVERS |
8336 | The version of the CNN classifier is not supported |
H_ERR_OCR_CNN_NOSITEM |
8337 | Serialized item does not contain a valid CNN classifier |
H_ERR_OCR_RESULT_NOT_AVAILABLE |
8338 | The result is not available for the selected text segmentation method |
H_ERR_OCV_NI |
8350 | OCV system not initialized |
H_ERR_WOCVTYPE |
8351 | The version of the OCV tool is not supported |
H_ERR_OCV_WNAME |
8353 | Wrong name for an OCV object |
H_ERR_OCV_II |
8354 | Training has already been applied |
H_ERR_OCV_NOTTR |
8355 | No training has been applied to the character |
H_ERR_OCV_NOSITEM |
8356 | Serialized item does not contain a valid OCV tool |
H_ERR_WLENGTH |
8370 | Wrong number of function points |
H_ERR_NO_FUNCTION |
8371 | List of values is not a function |
H_ERR_NOT_ASCENDING |
8372 | Wrong ordering of values (not ascending) |
H_ERR_ILLEGAL_DIST |
8373 | Illegal distance of function points |
H_ERR_NOT_MONOTONIC |
8374 | Function is not monotonic |
H_ERR_WFUNCTION |
8375 | Wrong function type |
H_ERR_SAME_XVAL_CONV |
8376 | The function contains multiple points with different x-values, that match the same value after the conversion from double to float. |
H_ERR_GRID_CONNECT_POINTS |
8390 | The input points could not be arranged in a regular grid |
H_ERR_GRID_GEN_MAP |
8391 | Error while creating the output map |
H_ERR_GRID_AUTO_ROT |
8392 | Auto rotation failed |
H_ERR_CAL_NO_COMM_PAR |
8393 | No common camera parameters |
H_ERR_CAL_NEGVY |
8394 | Vy must be > 0 |
H_ERR_CAL_IDENTICAL_FP |
8395 | Same finder pattern found multiple times |
H_ERR_CAL_LSCPNA |
8396 | Function not available for line scan cameras with perspective lenses |
H_ERR_CAL_MARK_SEGM |
8397 | Segmentation of the calibration marks failed |
H_ERR_CAL_CONT_EXT |
8398 | Extraction of the mark contours failed |
H_ERR_CAL_NO_FP |
8399 | No finder pattern could be found |
H_ERR_CAL_LCALP |
8400 | You have to indicate at least 3 calibration points |
H_ERR_CAL_INCONSISTENT_FP |
8401 | Inconsistent finder pattern positions (image mirrored?) |
H_ERR_CAL_NCPF |
8402 | No calibration table found |
H_ERR_CAL_RECPF |
8403 | Error while reading calibration table description file |
H_ERR_CAL_LTMTH |
8404 | Minimum threshold while searching for ellipses |
H_ERR_CAL_FRCP |
8405 | Read error / format error in calibration table description file |
H_ERR_CAL_PROJ |
8406 | Point cannot be projected |
H_ERR_CAL_UNPRO |
8407 | Error in inverse projection |
H_ERR_CAL_RICPF |
8408 | Not possible to open camera parameter file |
H_ERR_CAL_FICP1 |
8409 | Format error in file: no colon |
H_ERR_CAL_FICP2 |
8410 | Format error in file: 2. colon is missing |
H_ERR_CAL_FICP3 |
8411 | Format error in file: semicolon is missing |
H_ERR_CAL_REPOS |
8412 | Not possible to open camera parameter (pose) file |
H_ERR_CAL_FOPOS |
8413 | Format error in camera parameter (pose) file |
H_ERR_CAL_OCPDF |
8414 | Not possible to open calibration target description file |
H_ERR_CAL_OCPPS |
8415 | Not possible to open postscript file of calibration target |
H_ERR_CAL_EVECN |
8416 | Error while normalizing the vector |
H_ERR_CAL_NPLAN |
8417 | Fitting of calibration target failed |
H_ERR_CAL_NNMAR |
8418 | No next mark found |
H_ERR_CAL_NNEQU |
8419 | Normal equation system is not solvable |
H_ERR_CAL_QETHM |
8420 | Average quadratic error is too big for 3D position of mark |
H_ERR_CAL_NOELL |
8421 | Non elliptic contour |
H_ERR_CAL_WPARV |
8422 | Wrong parameter value slvand() |
H_ERR_CAL_WFRES |
8423 | Wrong function results slvand() |
H_ERR_CAL_ECPDI |
8424 | Distance of marks in calibration target description file is not possible |
H_ERR_CAL_WEFLA |
8425 | Specified flag for degree of freedom not valid |
H_ERR_CAL_NOMER |
8426 | Minimum error did not fall below |
H_ERR_CAL_WPTYP |
8427 | Wrong type in Pose (rotation / translation) |
H_ERR_CAL_WIMSZ |
8428 | Image size does not match the measurement in camera parameters |
H_ERR_CAL_NPILS |
8429 | Point could not be projected into linescan image |
H_ERR_CAL_DIACM |
8430 | Diameter of calibration marks could not be determined |
H_ERR_CAL_ORICP |
8431 | Orientation of calibration plate could not be determined |
H_ERR_CAL_CPNII |
8432 | Calibration plate does not lie completely inside the image |
H_ERR_CAL_WNCME |
8433 | Wrong number of calibration marks extracted |
H_ERR_CAL_UNKPG |
8434 | Unknown name of parameter group |
H_ERR_CAL_NEGFL |
8435 | Focal length must be non-negative |
H_ERR_CAL_TELNA |
8436 | Function not available for cameras with telecentric lenses |
H_ERR_CAL_LSCNA |
8437 | Function not available for line scan cameras |
H_ERR_CAL_ELLDP |
8438 | Ellipse is degenerated to a point |
H_ERR_CAL_NOMF |
8439 | No orientation mark found |
H_ERR_CAL_NCONV |
8440 | Camera calibration did not converge |
H_ERR_CAL_HYPNA |
8441 | Function not available for cameras with hypercentric lenses |
H_ERR_CAL_DISTORT |
8442 | Point cannot be distorted |
H_ERR_CAL_WREDGFILT |
8443 | Wrong edge filter for the mark extraction |
H_ERR_CAL_NEGPS |
8444 | Pixel size must be positive |
H_ERR_CAL_NEGTS |
8445 | Tilt must be within the range of 0° and 90° |
H_ERR_CAL_NEGRS |
8446 | Rot must be within the range of 0° and 360° |
H_ERR_CAL_INVCAMPAR |
8447 | Invalid camera parameters |
H_ERR_CAL_ILLFL |
8448 | Focal length must be positive |
H_ERR_CAL_ILLMAG |
8449 | Magnification must be positive |
H_ERR_CAL_ILLIPD |
8450 | Illegal image plane distance |
H_ERR_CM_NOT_OPTIMIZED |
8451 | Model not optimized yet - no results can be queried |
H_ERR_CM_NOT_POSTPROCC |
8452 | Model not postprocessed yet - no auxiliary results can be queried |
H_ERR_CM_NOT_INTERCONN |
8453 | Calibration setup: fields of view do not intersect |
H_ERR_CM_CAMPAR_MISMCH |
8454 | Camera type and camera parameters incompatible |
H_ERR_CM_CAMTYP_MISMCH |
8455 | Calibration setup: incompatible camera types |
H_ERR_CM_CAMTYP_UNSUPD |
8456 | Camera type not supported |
H_ERR_CM_INVALD_CAMIDX |
8457 | Invalid camera index |
H_ERR_CM_INVALD_DESCID |
8458 | Invalid calibration object index |
H_ERR_CM_INVALD_COBJID |
8459 | Invalid calibration object pose index |
H_ERR_CM_UNDEFINED_CAM |
8460 | Undefined camera |
H_ERR_CM_REPEATD_INDEX |
8461 | Indices: ambiguous observation index |
H_ERR_CM_UNDEFI_CADESC |
8462 | Undefined calibration object |
H_ERR_CM_NO_DESCR_FILE |
8463 | Invalid file format for calibration data model |
H_ERR_CM_WR_DESCR_VERS |
8464 | The version of the calibration data model is not supported |
H_ERR_CM_ZERO_MOTION |
8465 | Zero-motion in line scan camera parameters |
H_ERR_CM_MULTICAM_UNSP |
8466 | Calibration setup: multiple cameras and/or calibration objects not supported for camera type |
H_ERR_CM_INCMPLTE_DATA |
8467 | Incomplete observation data |
H_ERR_CSM_NO_DESCR_FIL |
8468 | Invalid file format for camera setup model |
H_ERR_CSM_WR_DESCR_VER |
8469 | The version of the camera setup model is not supported |
H_ERR_CM_CALTAB_NOT_AV |
8470 | Full HALCON calibration plate description required |
H_ERR_CM_INVAL_OBSERID |
8471 | Invalid observation index |
H_ERR_CSM_NOSITEM |
8472 | Serialized item does not contain a valid camera setup model |
H_ERR_CM_NOSITEM |
8473 | Serialized item does not contain a valid calibration data model |
H_ERR_CM_INV_TOOLPOSID |
8474 | Invalid tool pose index |
H_ERR_CM_UNDEFINED_TOO |
8475 | Undefined tool pose |
H_ERR_CM_INVLD_MODL_TY |
8476 | Feature or operation not supported for current calibration data model type |
H_ERR_CSM_UNINIT_CAM |
8477 | The camera setup model contains an uninitialized camera |
H_ERR_CM_NO_VALID_SOL |
8478 | The hand-eye algorithm failed to find a valid solution |
H_ERR_CM_INVAL_OBS_POSE |
8479 | Invalid observation pose: set_calib_data_observ_pose can only be called with calibration data models that have been configured for hand-eye-calibration; please use find_calib_object or set_calib_data_observ_points |
H_ERR_CM_TOO_FEW_POSES |
8480 | Not enough calibration object poses: For the hand-eye-calibration at least three calibration object poses are necessary |
H_ERR_CM_UNDEF_CAM_TYP |
8481 | Undefined camera type |
H_ERR_SM_INVLD_IMG_PAIRS_DISP_VAL |
8482 | Number of image pairs does not correspond to the number of disparity values |
H_ERR_SM_INVLD_DISP_VAL |
8483 | Wrong value of stereo model parameter ‘min_disparity’ or ‘max_disparity’ |
H_ERR_SM_NO_IM_PAIR |
8484 | No camera pair set by set_stereo_model_image_pairs |
H_ERR_SM_NO_VIS_COLOR |
8485 | No reconstructed point is visible for coloring |
H_ERR_SM_NO_RECONSTRUCT |
8486 | No camera pair yields reconstructed points (please check parameters of disparity method or bounding box) |
H_ERR_SM_INVLD_BB_PARTITION |
8487 | Partitioning of bounding box is too fine (please adapt the parameter ‘resolution’ or the bounding box) |
H_ERR_SM_INVLD_DISP_RANGE |
8488 | Disparity range as calculated by the bounding box and the parameter ‘rectif_sub_sampling’ exceeds the maximum permitted |
H_ERR_SM_INVLD_BIN_PAR |
8489 | The parameter to be set is not supported by the chosen disparity method |
H_ERR_SM_INVLD_MODL_TY |
8490 | Feature or operation not supported for current stereo model type |
H_ERR_SM_NOT_PERSISTEN |
8491 | Feature or operation available only in ‘persistent’ mode |
H_ERR_SM_INVLD_BOU_BOX |
8492 | Invalid bounding box |
H_ERR_SR_INVLD_IMG_SIZ |
8493 | Image sizes must be identical with the corresponding camera parameters from the camera setup |
H_ERR_SR_BBOX_BHND_CAM |
8494 | Bounding box lies partially or completely behind (for hypercentric lenses: in front of) the base line of at least one camera pair |
H_ERR_CAL_AMBIGUOUS |
8495 | Ambiguous calibration: Please, recalibrate with improved input data! |
H_ERR_CAL_PCPND |
8496 | Pose of calibration plate could not be determined! |
H_ERR_CAL_FAILED |
8497 | Calibration failed: Please check your input data and calibrate again! |
H_ERR_CAL_MISSING_DATA |
8498 | No observation data supplied! |
H_ERR_CAL_FEWER_FOUR |
8499 | The calibration object has to be seen at least once by every camera, if less than four cameras are used |
H_ERR_NOAP |
8500 | Invalid file format for template |
H_ERR_WPFV |
8501 | The version of the template is not supported |
H_ERR_NGTPTS |
8506 | Number of template points too small |
H_ERR_PDTL |
8507 | Template data can only be read by HALCON XL |
H_ERR_NCC_NOSITEM |
8508 | Serialized item does not contain a valid NCC model |
H_ERR_NTPTS |
8510 | Number of shape model points too small |
H_ERR_CGSMM |
8511 | Gray-value-based and color-based shape models cannot be searched simultaneously |
H_ERR_SMTL |
8512 | Shape model data can only be read by HALCON XL |
H_ERR_SMNXLD |
8513 | Shape model was not created from XLDs |
H_ERR_SM_NOSITEM |
8514 | Serialized item does not contain a valid shape model |
H_ERR_SM_CL_CONT |
8515 | Shape model contour too near to clutter region |
H_ERR_SM_NO_CLUT |
8516 | Shape model does not contain clutter parameters |
H_ERR_SM_SAME_CL |
8517 | Activation status for the usage of clutter parameters is not identical for all shape models |
H_ERR_SM_WRONG_CLCO |
8518 | Shape model has an invalid clutter contrast |
H_ERR_SM_CL_NEG |
8519 | Clutter region contains negative coordinates |
H_ERR_FIND_BOX_UNSUP_GENPARAM |
8520 | Box Finder: Unsupported generic parameter |
H_ERR_VARIATION_WS |
8540 | Size of the training image and the variation model differ |
H_ERR_VARIATION_PREP |
8541 | Variation model has not been prepared for segmentation |
H_ERR_VARIATION_WRMD |
8542 | Invalid variation model training mode |
H_ERR_VARIATION_NOVF |
8543 | Invalid file format for variation model |
H_ERR_VARIATION_WVFV |
8544 | The version of the variation model is not supported |
H_ERR_VARIATION_TRDC |
8545 | Training data has already been cleared |
H_ERR_VARIATION_NOSITEM |
8546 | Serialized item does not contain a valid variation model |
H_ERR_MEASURE_NA |
8550 | No more measure objects available |
H_ERR_MEASURE_NI |
8551 | Measure object is not initialized |
H_ERR_MEASURE_OOR |
8552 | Invalid measure object |
H_ERR_MEASURE_IS |
8553 | Measure object is NULL |
H_ERR_MEASURE_WS |
8554 | Measure object has wrong image size |
H_ERR_MEASURE_NO_MODEL_FILE |
8555 | Invalid file format for measure object |
H_ERR_MEASURE_WRONG_VERSION |
8556 | The version of the measure object is not supported |
H_ERR_MEASURE_TL |
8557 | Measure object data can only be read by HALCON XL |
H_ERR_MEASURE_NOSITEM |
8558 | Serialized item does not contain a valid measure object |
H_ERR_METROLOGY_MODEL_NI |
8570 | Metrology model is not initialized |
H_ERR_METROLOGY_OBJECT_INVALID |
8572 | Invalid metrology object |
H_ERR_METROLOGY_FIT_NOT_ENOUGH_MEASURES |
8573 | Not enough valid measures for fitting the metrology object |
H_ERR_METROLOGY_NO_MODEL_FILE |
8575 | Invalid file format for metrology model |
H_ERR_METROLOGY_WRONG_VERSION |
8576 | The version of the metrology model is not supported |
H_ERR_METROLOGY_NO_FUZZY_FUNC |
8577 | Fuzzy function is not set |
H_ERR_METROLOGY_NOSITEM |
8578 | Serialized item does not contain a valid metrology model |
H_ERR_METROLOGY_UNDEF_CAMPAR |
8579 | Camera parameters are not set |
H_ERR_METROLOGY_UNDEF_POSE |
8580 | Pose of the measurement plane is not set |
H_ERR_METROLOGY_SET_MODE |
8581 | Mode of metrology model cannot be set since an object has already been added |
H_ERR_METROLOGY_OP_NOT_ALLOWED |
8582 | If the pose of the metrology object has been set several times, the operator is not longer allowed |
H_ERR_METROLOGY_MULTI_POSE_CAM_PAR |
8583 | All objects of a metrology model must have the same world pose and camera parameters |
H_ERR_METROLOGY_WRONG_INPUT_MODE |
8584 | The input type does not correspond to the input type set for the metrology model |
H_ERR_DLOPEN |
8600 | Dynamic library could not be opened |
H_ERR_DLCLOSE |
8601 | Dynamic library could not be closed |
H_ERR_DLLOOKUP |
8602 | Symbol not found in dynamic library |
H_ERR_COMPONENT_NOT_INSTALLED |
8603 | Interface library not available. Check www.mvtec.com/download for additional interfaces |
H_ERR_EAD_CAL_NII |
8650 | Not enough information for radiometric calibration |
H_ERR_WGSMFV |
8670 | The version of the shape model result is not supported |
H_ERR_GSM_INVALID_RES_SCALE |
8671 | Restrict scale parameter outside the trained range |
H_ERR_GSM_INVALID_ANGLE |
8672 | Angle parameter outside the trained range |
H_ERR_GSM_NEEDS_TRAINING |
8673 | Shape model needs training |
H_ERR_GSM_CONTRAST_HYS |
8674 | contrast_high cannot be smaller than contrast_low |
H_ERR_GSM_CONTRAST_MIN_CONTRAST |
8675 | Neither contrast_low nor contrast_high can be smaller than min_contrast |
H_ERR_GSM_ISO_SCALE_PAIR |
8676 | iso_scale_max cannot be smaller than iso_scale_min |
H_ERR_GSM_ANISO_SCALE_ROW |
8677 | scale_row_max cannot be smaller than scale_row_min |
H_ERR_GSM_ANISO_SCALE_COLUMN |
8678 | scale_column_max cannot be smaller than scale_column_min |
H_ERR_GSM_ISO_NOT_SET |
8679 | Isotropic scaling not set |
H_ERR_GSM_ANISO_NOT_SET |
8680 | Anisotropic scaling not set |
H_ERR_GSM_INVALID_METRIC_XLD |
8681 | No edge direction available to change shape matching metric |
H_ERR_GSM_SAME_IDENTIFIER |
8682 | Shape models with the same identifier cannot be searched simultaneously |
H_ERR_SM_INCONSISTENT_PER_LEVEL |
8683 | Set parameters are inconsistent with estimated ‘per_level’ values |
H_ERR_GSM_SAMPLE_TRAINING |
8684 | Sample-based training failed for the shape model |
H_ERR_GSM_POINT_SCORES |
8685 | Model setting does not allow the calculation of model point scores |
H_ERR_GSM_SET_SAMPLE_TRAINING |
8686 | Model setting is not compatible with the set methods for sample-based training |
H_ERR_BAR_WNOM |
8701 | Wrong number of modules |
H_ERR_BAR_WNOE |
8702 | Wrong number of elements |
H_ERR_BAR_UNCHAR |
8703 | Unknown character (for this code) |
H_ERR_BAR_WRONGDESCR |
8705 | Wrong name for attribute in barcode descriptor |
H_ERR_BAR_EL_LENGTH |
8706 | Wrong thickness of element |
H_ERR_BAR_NO_REG |
8707 | No region found |
H_ERR_BAR_WRONGCODE |
8708 | Wrong type of bar code |
H_ERR_BAR_INTERNAL |
8709 | Internal error in bar code reader |
H_ERR_BAR_NO_DECODED_SCANLINE |
8710 | Bar code candidate does not contain a decoded scanline |
H_ERR_BC_EMPTY_MODEL_LIST |
8721 | List of bar code models is empty |
H_ERR_BC_TRAIN_ONLY_SINGLE |
8722 | Training cannot be done for multiple bar code types |
H_ERR_BC_GET_SPECIFIC |
8723 | Cannot get bar code type specific parameter with get_bar_code_param. Use get_bar_code_param_specific |
H_ERR_BC_GET_OBJ_MULTI |
8724 | Cannot get this object for multiple bar code types. Try again with single bar code type |
H_ERR_BC_WR_FILE_FORMAT |
8725 | Invalid file format for bar code model |
H_ERR_BC_WR_FILE_VERS |
8726 | The version of the bar code model is not supported |
H_ERR_BC_NOT_PERSISTANT |
8727 | Feature or operation available only in ‘persistent’ mode |
H_ERR_BC_GRAY_OUT_OF_RANGE |
8728 | Incorrect index of scanline’s gray values |
H_ERR_NO_PERSISTENT_OP_CALL |
8729 | Neither find_bar_code nor decode_bar_code_rectanlge2 have been called in persistent mode on this model |
H_ERR_BC_ZOOMED_ABORTED |
8730 | The zoomed barcode algorithm has been aborted |
H_ERR_BC_ZOOMED_INVALID_INPUT |
8731 | zoomed barcode: Invalid input data. |
H_ERR_BC_XCORR_INVALID_INPUT |
8740 | Barcode: Invalid inputs for NCC |
H_ERR_BC_XCORR_TOO_MANY_BAD_ROWS |
8741 | Barcode: Too many invalid rows during NCC |
H_ERR_BC_XCORR_NO_CORRELATION |
8742 | Barcode: No correlation found during NCC |
H_ERR_INVALID_SYNTAX_DICTIONARY |
8743 | Invalid GS1 Application Identifier Syntax Dictionary |
H_ERR_BAR2D_UNKNOWN_TYPE |
8800 | Specified code type is not supported |
H_ERR_BAR2D_WRONG_FOREGROUND |
8801 | Wrong foreground specified |
H_ERR_BAR2D_WRONG_SIZE |
8802 | Wrong matrix size specified |
H_ERR_BAR2D_WRONG_SHAPE |
8803 | Wrong symbol shape specified |
H_ERR_BAR2D_WRONG_PARAM_NAME |
8804 | Wrong generic parameter name |
H_ERR_BAR2D_WRONG_PARAM_VAL |
8805 | Wrong generic parameter value |
H_ERR_BAR2D_WRONG_MODE |
8806 | Wrong symbol printing mode |
H_ERR_BAR2D_SYMBOL_ON_BORDER |
8807 | Symbol region too near to image border |
H_ERR_BAR2D_MODULE_CONT_NUM |
8808 | No rectangular modul boundaries found |
H_ERR_BAR2D_SYMBOL_FINDER |
8809 | Couldn’t identify symbol finder |
H_ERR_BAR2D_SYMBOL_DIMENSION |
8810 | Symbol region with wrong dimension |
H_ERR_BAR2D_CLASSIF_FAILED |
8811 | Classification failed |
H_ERR_BAR2D_DECODING_FAILED |
8812 | Decoding failed |
H_ERR_BAR2D_DECODING_READER |
8813 | Reader programming not supported |
H_ERR_DC2D_GENERAL |
8820 | General 2d data code error |
H_ERR_DC2D_BROKEN_SIGN |
8821 | Corrupt signature of 2d data code handle |
H_ERR_DC2D_INVALID_HANDLE |
8822 | Invalid 2d data code handle |
H_ERR_DC2D_EMPTY_MODEL_LIST |
8823 | List of 2d data code models is empty |
H_ERR_DC2D_NOT_INITIALIZED |
8824 | Access to uninitialized (or not persistent) internal data |
H_ERR_DC2D_INVALID_CANDIDATE |
8825 | Invalid ‘Candidate’ parameter |
H_ERR_DC2D_INDEX_PARNUM |
8826 | It’s not possible to return more than one parameter for several candidates |
H_ERR_DC2D_EXCLUSIV_PARAM |
8827 | One of the parameters returns several values and has to be used exclusively for a single candidate |
H_ERR_DC2D_DEF_SET_NOT_FIRST |
8828 | Parameter for default settings must be the first in the parameter list |
H_ERR_DC2D_INTERNAL_UNEXPECTED |
8829 | Unexpected 2d data code error |
H_ERR_DC2D_WRONG_PARAM_VALUE |
8830 | Invalid parameter value |
H_ERR_DC2D_WRONG_PARAM_NAME |
8831 | Unknown parameter name |
H_ERR_DC2D_WRONG_POLARITY |
8832 | Invalid value for ‘polarity’ |
H_ERR_DC2D_WRONG_SYMBOL_SHAPE |
8833 | Invalid value for ‘symbol_shape’ |
H_ERR_DC2D_WRONG_SYMBOL_SIZE |
8834 | Invalid symbol size |
H_ERR_DC2D_WRONG_MODULE_SIZE |
8835 | Invalid module size |
H_ERR_DC2D_WRONG_MODULE_SHAPE |
8836 | Invalid value for ‘module_shape’ |
H_ERR_DC2D_WRONG_ORIENTATION |
8837 | Invalid value for ‘orientation’ |
H_ERR_DC2D_WRONG_CONTRAST |
8838 | Invalid value for ‘contrast_min’ |
H_ERR_DC2D_WRONG_MEAS_THRESH |
8839 | Invalid value for ‘measure_thresh’ |
H_ERR_DC2D_WRONG_ALT_MEAS_RED |
8840 | Invalid value for ‘alt_measure_red’ |
H_ERR_DC2D_WRONG_SLANT |
8841 | Invalid value for ‘slant_max’ |
H_ERR_DC2D_WRONG_L_DIST |
8842 | Invalid value for ‘L_dist_max’ |
H_ERR_DC2D_WRONG_L_LENGTH |
8843 | Invalid value for ‘L_length_min’ |
H_ERR_DC2D_WRONG_GAP |
8844 | Invalid module gap |
H_ERR_DC2D_WRONG_DEF_SET |
8845 | Invalid value for ‘default_parameters’ |
H_ERR_DC2D_WRONG_TEXTURED |
8846 | Invalid value for ‘back_texture’ |
H_ERR_DC2D_WRONG_MIRRORED |
8847 | Invalid value for ‘mirrored’ |
H_ERR_DC2D_WRONG_CLASSIFICATOR |
8848 | Invalid value for ‘classificator’ |
H_ERR_DC2D_WRONG_PERSISTENCE |
8849 | Invalid value for ‘persistence’ |
H_ERR_DC2D_WRONG_MODEL_TYPE |
8850 | Invalid model type |
H_ERR_DC2D_WRONG_MOD_ROI_PART |
8851 | Invalid value for ‘module_roi_part’ |
H_ERR_DC2D_WRONG_FP_TOLERANCE |
8852 | Invalid value for ‘finder_pattern_tolerance’ |
H_ERR_DC2D_WRONG_MOD_ASPECT |
8853 | Invalid value for ‘mod_aspect_max’ |
H_ERR_DC2D_WRONG_SM_ROBUSTNESS |
8854 | Invalid value for ‘small_modules_robustness’ |
H_ERR_DC2D_WRONG_CONTRAST_TOL |
8855 | Invalid ‘contrast_tolerance’ |
H_ERR_DC2D_WRONG_AP_TOLERANCE |
8856 | Invalid value for ‘alternating_pattern_tolerance’ |
H_ERR_DC2D_WRONG_DEFORM_TOL |
8857 | Invalid value for ‘deformation_tolerance’ |
H_ERR_DC2D_READ_HEAD_FORMAT |
8860 | Invalid header in 2d data code model file |
H_ERR_DC2D_READ_HEAD_SIGN |
8861 | Invalid code signature in 2d data code model file |
H_ERR_DC2D_READ_LINE_FORMAT |
8862 | Corrupted line in 2d data code model file |
H_ERR_DC2D_WRONG_MODULE_ASPECT |
8863 | Invalid module aspect ratio |
H_ERR_DC2D_WRONG_LAYER_NUM |
8864 | Invalid layer num |
H_ERR_DCD_READ_WRONG_VERSION |
8865 | Wrong data code model file version |
H_ERR_DC2D_NOSITEM |
8866 | Serialized item does not contain a valid 2D data code model |
H_ERR_DC2D_WR_FILE_FORMAT |
8867 | Invalid file format for data code model |
H_ERR_DC2D_PARAM_ONLY_AVAILABLE_WITH_DL |
8868 | Parameter only available with ‘detection_method’=’deep_learning’ |
H_ERR_DC2D_WRONG_AP_TOLERANCE_QL |
8869 | Invalid value for ‘alternating_pattern_tolerance_ql’ |
H_ERR_SM3D_WRONG_PARAM_NAME |
8900 | Unknown parameter name |
H_ERR_SM3D_WRONG_NUM_LEVELS |
8901 | Invalid value for ‘num_levels’ |
H_ERR_SM3D_WRONG_OPTIMIZATION |
8902 | Invalid value for ‘optimization’ |
H_ERR_SM3D_WRONG_METRIC |
8903 | Invalid value for ‘metric’ |
H_ERR_SM3D_WRONG_MIN_FACE_ANGLE |
8904 | Invalid value for ‘min_face_angle’ |
H_ERR_SM3D_WRONG_MIN_SIZE |
8905 | Invalid value for ‘min_size’ |
H_ERR_SM3D_WRONG_MODEL_TOLERANCE |
8906 | Invalid value for ‘model_tolerance’ |
H_ERR_SM3D_WRONG_FAST_POSE_REF |
8907 | Invalid value for ‘fast_pose_refinement’ |
H_ERR_SM3D_WRONG_LOWEST_MODEL_LEVEL |
8908 | Invalid value for ‘lowest_model_level’ |
H_ERR_SM3D_WRONG_PART_SIZE |
8909 | Invalid value for ‘part_size’ |
H_ERR_SM3D_PROJECTION_TOO_LARGE |
8910 | The projected model is too large (the value for DistMin or the image size in CamParam is too small) |
H_ERR_SM3D_WRONG_OPENGL_ACCURACY |
8911 | Invalid value for ‘opengl_accuracy’ |
H_ERR_SM3D_WRONG_RECOMPUTE_SCORE |
8913 | Invalid value for ‘recompute_score’ |
H_ERR_SM3D_WRONG_LON_MIN |
8920 | Invalid value for ‘longitude_min’ |
H_ERR_SM3D_WRONG_LON_MAX |
8921 | Invalid value for ‘longitude_max’ |
H_ERR_SM3D_WRONG_LAT_MIN |
8922 | Invalid value for ‘latitude_min’ |
H_ERR_SM3D_WRONG_LAT_MAX |
8923 | Invalid value for ‘latitude_max’ |
H_ERR_SM3D_WRONG_ROL_MIN |
8924 | Invalid value for ‘cam_roll_min’ |
H_ERR_SM3D_WRONG_ROL_MAX |
8925 | Invalid value for ‘cam_roll_max’ |
H_ERR_SM3D_WRONG_DIST_MIN |
8926 | Invalid value for ‘dist_min’ |
H_ERR_SM3D_WRONG_DIST_MAX |
8927 | Invalid value for ‘dist_max’ |
H_ERR_SM3D_WRONG_NUM_MATCHES |
8928 | Invalid value for ‘num_matches’ |
H_ERR_SM3D_WRONG_MAX_OVERLAP |
8929 | Invalid value for ‘max_overlap’ |
H_ERR_SM3D_WRONG_POSE_REFINEMENT |
8930 | Invalid value for ‘pose_refinement’ |
H_ERR_SM3D_WRONG_COV_POSE_MODE |
8931 | Invalid value for ‘cov_pose_mode’ |
H_ERR_SM3D_WRONG_OUTLIER_SUP |
8932 | Invalid value for ‘outlier_suppression’ |
H_ERR_SM3D_WRONG_BORDER_MODEL |
8933 | Invalid value for ‘border_model’ |
H_ERR_SM3D_UNDEFINED_POSE |
8940 | Pose is not well-defined |
H_ERR_SM3D_NO_SM3D_FILE |
8941 | Invalid file format for 3D shape model |
H_ERR_SM3D_WRONG_FILE_VERSION |
8942 | The version of the 3D shape model is not supported |
H_ERR_SM3D_MTL |
8943 | 3D shape model data can only be read by HALCON XL |
H_ERR_SM3D_NO_OM3D_FACES |
8944 | 3D object model does not contain any faces |
H_ERR_SM3D_NOSITEM |
8945 | Serialized item does not contain a valid 3D shape model |
H_ERR_SM3D_WRONG_UNION_ADJACENT_CONTOURS |
8946 | Invalid value for ‘union_adjacent_contours’ |
H_ERR_DM3D_NO3DPOSEEST |
8947 | Pose estimation model contains insufficient information |
H_ERR_DESCR_NODESCRFILE |
8960 | Invalid file format for descriptor model |
H_ERR_DESCR_WRDESCRVERS |
8961 | The version of the descriptor model is not supported |
H_ERR_DM_WRONG_NUM_CIRC_RADIUS |
8962 | Invalid value for ‘radius’ |
H_ERR_DM_WRONG_NUM_CHECK_NEIGH |
8963 | Invalid value for ‘check_neighbor’ |
H_ERR_DM_WRONG_NUM_MIN_CHECK_NEIGH |
8964 | Invalid value for ‘min_check_neighbor_diff’ |
H_ERR_DM_WRONG_NUM_MIN_SCORE |
8965 | Invalid value for ‘min_score’ |
H_ERR_DM_WRONG_NUM_SIGMAGRAD |
8966 | Invalid value for ‘sigma_grad’ |
H_ERR_DM_WRONG_NUM_SIGMAINT |
8967 | Invalid value for ‘sigma_smooth’ |
H_ERR_DM_WRONG_NUM_ALPHA |
8968 | Invalid value for ‘alpha’ |
H_ERR_DM_WRONG_NUM_THRESHOLD |
8969 | Invalid value for ‘threshold’ |
H_ERR_DM_WRONG_NUM_DEPTH |
8970 | Invalid value for ‘depth’ |
H_ERR_DM_WRONG_NUM_TREES |
8971 | Invalid value for ‘number_trees’ |
H_ERR_DM_WRONG_NUM_MIN_SCORE_DESCR |
8972 | Invalid value for ‘min_score_descr’ |
H_ERR_DM_WRONG_NUM_PATCH_SIZE |
8973 | Invalid value for ‘patch_size’ |
H_ERR_DM_WRONG_TILT |
8974 | Invalid value for ‘tilt’ |
H_ERR_DM_WRONG_PAR_GUIDE |
8975 | Invalid value for ‘guided_matching’ |
H_ERR_DM_WRONG_PAR_SUBPIX |
8976 | Invalid value for ‘subpix’ |
H_ERR_DM_TOO_FEW_POINTS |
8977 | Too few feature points can be found |
H_ERR_DM_WRONG_NUM_MINROT |
8978 | Invalid value for ‘min_rot’ |
H_ERR_DM_WRONG_NUM_MAXROT |
8979 | Invalid value for ‘max_rot’ |
H_ERR_DM_WRONG_NUM_MINSCALE |
8980 | Invalid value for ‘min_scale’ |
H_ERR_DM_WRONG_NUM_MAXSCALE |
8981 | Invalid value for ‘max_scale’ |
H_ERR_DM_WRONG_NUM_MASKSIZEGRD |
8982 | Invalid value for ‘mask_size_grd’ |
H_ERR_DM_WRONG_NUM_MASKSIZESMOOTH |
8983 | Invalid value for ‘mask_size_smooth’ |
H_ERR_BROKEN_MODEL |
8984 | Model broken |
H_ERR_DM_WRONG_DESCR_TYPE |
8985 | Invalid value for ‘descriptor_type’ |
H_ERR_DM_WRONG_PAR_MATCHER |
8986 | Invalid value for ‘matcher’ |
H_ERR_DM_TOO_MANY_CLASSES |
8987 | Too many point classes - model storing in a file is not possible |
H_ERR_DESCR_NOSITEM |
8988 | Serialized item does not contain a valid descriptor model |
H_ERR_NOT_IMPL |
9000 | Function not implemented on this machine |
H_ERR_WIT |
9001 | Image to process has wrong gray value type |
H_ERR_WIC |
9002 | Wrong image component (see: get_system(obj_images,H)) |
H_ERR_UNDI |
9003 | Undefined gray values |
H_ERR_WIS |
9004 | Wrong image format for operation (too big or too small) |
H_ERR_WCN |
9005 | Wrong number of image components for image output |
H_ERR_STRTL |
9006 | String is too long (max. 1024 characters) |
H_ERR_WITFO |
9007 | Wrong pixel type for this operation |
H_ERR_NIIT |
9008 | Operation not realized yet for this pixel type |
H_ERR_NOCIMA |
9009 | Image is no color image with three channels |
H_ERR_DEMO_NOFG |
9010 | Image acquisition devices are not supported in the demo version |
H_ERR_DEMO_NOPA |
9011 | Packages are not supported in the demo version |
H_ERR_IEUNKV |
9020 | Internal error: Unknown value |
H_ERR_WPFO |
9021 | Wrong parameter for this operation |
H_ERR_IDTS |
9022 | Image domain too small |
H_ERR_CNCLDRW |
9023 | Draw operator has been canceled |
H_ERR_REGEX_MATCH |
9024 | Error during regular expression matching |
H_ERR_STUD_OPNA |
9050 | Operator is not available in this restricted version of HALCON |
H_ERR_STUD_PANA |
9051 | Packages are not available in this restricted version of HALCON |
H_ERR_STUD_FGNA |
9052 | The selected image acquisition interface is not available in this restricted version of HALCON |
H_ERR_NDPA |
9053 | No data points available |
H_ERR_WR_OBJ_TYPE |
9054 | Type of the object is not supported |
H_ERR_OP_DISABLED |
9055 | Operator is disabled |
H_ERR_TMU |
9100 | Too many unknown variables in linear equation |
H_ERR_NUS |
9101 | No (unique) solution for the linear equation |
H_ERR_NEE |
9102 | Too little equations in linear equation |
H_ERR_PDDL |
9150 | Points do not define a line |
H_ERR_MNI |
9200 | Matrix is not invertible |
H_ERR_SVD_CNVRG |
9201 | Singular value decomposition did not converge |
H_ERR_SVD_FEWROW |
9202 | Matrix has too few rows for singular value partition |
H_ERR_TQLI_CNVRG |
9203 | Eigenvalue computation did not converge |
H_ERR_JACOBI_CNVRG |
9204 | Eigenvalue computation did not converge |
H_ERR_MATRIX_SING |
9205 | Matrix is singular |
H_ERR_MATCH_CNVRG |
9206 | Function matching did not converge |
H_ERR_MAT_UNDEF |
9207 | Input matrix undefined |
H_ERR_MAT_WDIM |
9208 | Input matrix with wrong dimension |
H_ERR_MAT_NSQR |
9209 | Input matrix is not quadratic |
H_ERR_MAT_FAIL |
9210 | Matrix operation failed |
H_ERR_MAT_NPD |
9211 | Matrix is not positive definite |
H_ERR_MAT_DBZ |
9212 | One element of the matrix is zero: Division by zero |
H_ERR_MAT_NUT |
9213 | Matrix is not an upper triangular matrix |
H_ERR_MAT_NLT |
9214 | Matrix is not a lower triangular matrix |
H_ERR_MAT_NEG |
9215 | One element of the matrix is negative |
H_ERR_MAT_UNCHAR |
9216 | Matrix file: Invalid character |
H_ERR_MAT_NOT_COMPLETE |
9217 | Matrix file: Matrix incomplete |
H_ERR_MAT_READ |
9218 | Invalid file format for matrix |
H_ERR_MAT_COMPLEX |
9219 | Resulting matrix has complex values |
H_ERR_WMATEXP |
9220 | Wrong value in matrix of exponents |
H_ERR_MAT_WRONG_VERSION |
9221 | The version of the matrix is not supported |
H_ERR_MAT_NOSITEM |
9222 | Serialized item does not contain a valid matrix |
H_ERR_WNODE |
9230 | Internal error: wrong Node |
H_ERR_CMP_INCONSISTENT |
9231 | Inconsistent red black tree |
H_ERR_LAPACK_PAR |
9250 | Internal error: Wrong LAPACK parameter |
H_ERR_STRI_NPNT |
9260 | Number of points too small for spherical triangulation |
H_ERR_STRI_COLL |
9261 | First three points are collinear in spherical triangulation |
H_ERR_STRI_IDPNT |
9262 | Spherical triangulation contains identical input points |
H_ERR_STRI_NALLOC |
9263 | Internal error: array not allocated large enough for spherical triangulation |
H_ERR_STRI_DEGEN |
9264 | Spherical Voronoi diagram contains degenerate triangle |
H_ERR_STRI_ITRI |
9265 | Internal error: inconsistent spherical triangulation |
H_ERR_STRI_SELFINT |
9266 | Spherical Voronoi diagram contains self-intersecting polygon |
H_ERR_STRI_INCONS |
9267 | Internal error: inconsistent spherical polygon data |
H_ERR_STRI_AMBINT |
9268 | Internal error: Ambiguous great circle arc intersection |
H_ERR_STRI_AMBARC |
9269 | Internal error: Ambiguous great circle arc |
H_ERR_STRI_ILLPAR |
9270 | Internal error: Illegal parameter |
H_ERR_TRI_NPNT |
9280 | Not enough points for planar triangular meshing |
H_ERR_TRI_COLL |
9281 | The first three points of the triangular meshing are collinear |
H_ERR_TRI_IDPNT |
9282 | Planar triangular meshing contains identical input points |
H_ERR_TRI_IDPNTIN |
9283 | Invalid points for planar triangular meshing |
H_ERR_TRI_NALLOC |
9284 | Internal error: allocated array too small for planar triangular meshing |
H_ERR_TRI_ITRI |
9285 | Internal error: planar triangular meshing inconsistent |
H_ERR_TRI_OUTR |
9286 | Node index outside triangulation range |
H_ERR_TRI_LOCINC |
9290 | Local inconsistencies in all valid neighborhoods (parameters only allow few valid neighborhoods or point cloud not subsampled) |
H_ERR_WSPVP |
9300 | Eye point and reference point coincide |
H_ERR_DQ_ZERO_NORM |
9310 | Real part of the dual quaternion has length 0 |
H_ERR_TIMEOUT |
9400 | Timeout occurred |
H_ERR_WRONG_TIMEOUT |
9401 | Invalid value for timeout |
H_ERR_DEFORM_WRONG_NUM_CLUSTER |
9450 | Invalid value for ‘part_size’ |
H_ERR_DEFORM_WRONG_NUM_MIN_SIZE |
9451 | Invalid value for ‘min_size’ |
H_ERR_DEFORM_WRONG_NUM_LSQ |
9452 | Invalid number of least-squares iterations |
H_ERR_DEFORM_WRONG_ANGLE_STEP |
9453 | Invalid value for ‘angle_step’ |
H_ERR_DEFORM_WRONG_SCALE_R_STEP |
9454 | Invalid value for ‘scale_r_step’ |
H_ERR_DEFORM_WRONG_SCALE_C_STEP |
9455 | Invalid value for ‘scale_c_step’ |
H_ERR_DEFORM_WRONG_MAX_ANGLE |
9456 | Invalid value for ‘max_angle_distortion’ |
H_ERR_DEFORM_WRONG_MAX_ANISO |
9457 | Invalid value for ‘max_aniso_scale_distortion’ |
H_ERR_DEFORM_WRONG_MIN_SIZE |
9458 | Invalid value for ‘min_size’ |
H_ERR_DEFORM_WRONG_COV_POSE_MODE |
9459 | Invalid value for ‘cov_pose_mode’ |
H_ERR_DEFORM_NO_CALIBRATION_INFO |
9460 | Model contains no calibration information |
H_ERR_DEFORM_WRONG_PARAM_NAME |
9461 | Generic parameter name does not exist |
H_ERR_DEFORM_IMAGE_TO_CAMERA_DIFF |
9462 | Provided camera parameters have different resolution than image |
H_ERR_DEFORM_NO_MODEL_IN_FILE |
9463 | Invalid file format for deformable model |
H_ERR_DEFORM_WRONG_VERSION |
9464 | The version of the deformable model is not supported |
H_ERR_DEFORM_WRONG_SMOOTH_DEFORM |
9465 | Invalid ‘deformation_smoothness’ |
H_ERR_DEFORM_WRONG_EXPAND_BORDER |
9466 | Invalid ‘expand_border’ |
H_ERR_DEFORM_ORIGIN_OUTSIDE_TEMPLATE |
9467 | Model origin outside of axis-aligned bounding rectangle of template region |
H_ERR_DEFORM_NOSITEM |
9468 | Serialized item does not contain a valid deformable model |
H_ERR_VIEW_ESTIM_FAIL |
9499 | Estimation of viewpose failed |
H_ERR_SFM_NO_POINTS |
9500 | 3D Object Model has no points |
H_ERR_SFM_NO_FACES |
9501 | 3D Object Model has no faces |
H_ERR_SFM_NO_NORMALS |
9502 | 3D Object Model has no normals |
H_ERR_SFM_NO_VISIBILITY |
9503 | 3D surface model not trained for calculating view-based score |
H_ERR_SFM_NO_3D_EDGES |
9504 | 3D surface model not trained for edge-supported matching |
H_ERR_SFM_NO_SFM_FILE |
9506 | Invalid file format for 3D surface model |
H_ERR_SFM_WRONG_FILE_VERSION |
9507 | The version of the 3D surface model is not supported |
H_ERR_SFM_NOSITEM |
9508 | Serialized item does not contain a valid 3D surface model |
H_ERR_SFM_TOO_MANY_SYMMS |
9509 | Given symmetry poses generate too many symmetric poses |
H_ERR_OM3D_INVALID_FILE |
9510 | Invalid 3D file |
H_ERR_OM3D_INVALID_MODEL |
9511 | Invalid 3D object model |
H_ERR_OM3D_UNKNOWN_FILE_TYPE |
9512 | Unknown file type |
H_ERR_OM3D_WRONG_FILE_VERSION |
9513 | The version of the 3D object model is not supported |
H_ERR_OM3D_MISSING_ATTRIB |
9514 | Required attribute missing in 3D object model |
H_ERR_OM3D_MISSING_ATTRIB_V_COORD |
9515 | Required points missing in 3D object model |
H_ERR_OM3D_MISSING_ATTRIB_V_NORMALS |
9516 | Required normals missing in 3D object model |
H_ERR_OM3D_MISSING_ATTRIB_F_TRIANGLES |
9517 | Required triangulation missing in 3D object model |
H_ERR_OM3D_MISSING_ATTRIB_F_LINES |
9518 | Required polylines missing in 3D object model |
H_ERR_OM3D_MISSING_ATTRIB_F_TRINEIGB |
9519 | Required triangle neighborhood missing in 3D object model |
H_ERR_OM3D_MISSING_ATTRIB_F_POLYGONS |
9520 | Required polygons missing in 3D object model |
H_ERR_OM3D_MISSING_ATTRIB_V_2DMAP |
9521 | Required 2D mapping missing in 3D object model |
H_ERR_OM3D_MISSING_ATTRIB_O_PRIMITIVE |
9522 | Required primitive missing in 3D object model |
H_ERR_OM3D_MISSING_ATTRIB_SHAPE_MODEL |
9523 | Required 3D shape model missing in 3D object model |
H_ERR_OM3D_MISSING_ATTRIB_EXTENDED |
9524 | Required extended attribute missing in 3D object model |
H_ERR_OM3D_NOSITEM |
9525 | Serialized item does not contain a valid 3D object model |
H_ERR_OM3D_MISSING_O_PRIMITIVE_EXTENSION |
9526 | Primitive in 3D object model has no extended data |
H_ERR_OM3D_CONTAIN_ATTRIB_F_TRIANGLES |
9527 | Operation invalid, 3D object model already contains triangles |
H_ERR_OM3D_CONTAIN_ATTRIB_F_LINES |
9528 | Operation invalid, 3D object model already contains lines |
H_ERR_OM3D_CONTAIN_ATTRIB_F_POLYGONS |
9529 | Operation invalid, 3D object model already contains faces or polygons |
H_ERR_OM3D_ISOLATED_OBJECT |
9530 | For at least one input 3D object model no neighbor with sufficient surface overlap is available |
H_ERR_OM3D_SET_ALL_COORD |
9531 | All components of points must be set at once |
H_ERR_OM3D_SET_ALL_NORMALS |
9532 | All components of normals must be set at once |
H_ERR_OM3D_NUM_NOT_FIT_COORD |
9533 | Number of values does not correspond to number of already existing points |
H_ERR_OM3D_NUM_NOT_FIT_NORMALS |
9534 | Number of values does not correspond to number of already existing normals |
H_ERR_OM3D_NUM_NOT_FIT_TRIANGLES |
9535 | Number of values does not correspond to already existing triangulation |
H_ERR_OM3D_NUM_NOT_FIT_POLYGONS |
9536 | Number of values does not correspond to length of already existing polygons |
H_ERR_OM3D_NUM_NOT_FIT_LINES |
9537 | Number of values does not correspond to length of already existing polylines |
H_ERR_OM3D_NUM_NOT_FIT_2DMAP |
9538 | Number of values does not correspond to already existing 2D mapping |
H_ERR_OM3D_NUM_NOT_FIT_EXTENDED |
9539 | Number of values does not correspond to already existing extended attribute |
H_ERR_OM3D_FACE_INTENSITY_WITH_POINTS |
9540 | Per-face intensity is used with attribute ‘points’ |
H_ERR_OM3D_ATTRIBUTE_NOT_SUPPORTED |
9541 | At least one attribute is not supported |
H_ERR_OM3D_NOT_IN_BB |
9542 | No point within bounding box |
H_ERR_DIF_TOO_SMALL |
9543 | distance_in_front is smaller than the ‘Resolution’ |
H_ERR_MINTH_TOO_SMALL |
9544 | The minimum thickness is smaller than the surface tolerance |
H_ERR_OM3D_WRONG_DIMENSION |
9545 | Input width or height does not match the number of points in 3D object model |
H_ERR_OM3D_MISSING_DIMENSION |
9546 | Image width or height must be set to compute the XYZ-mapping |
H_ERR_OM3D_ATTRIB_V_2DMAP_CONSISTENT |
9547 | XYZ-mappings do not match |
H_ERR_SF_OM3D_TRIANGLES_NOT_SUITABLE |
9550 | Triangles of the 3D object model are not suitable for this operator |
H_ERR_SF_OM3D_FEW_POINTS |
9551 | Too few suitable 3D points in the 3D object model |
H_ERR_NO_SERIALIZED_ITEM |
9580 | Invalid file format for serialized items |
H_ERR_END_OF_FILE |
9581 | Serialized item: premature end of file |
H_ERR_FINI_USR_THREADS |
9700 | More than one user thread still uses HALCON resources during finalization |
H_ERR_NO_ENCRYPTED_ITEM |
9800 | Invalid file format for encrypted items |
H_ERR_WRONG_PASSWORD |
9801 | Wrong password |
H_ERR_ENCRYPT_FAILED |
9802 | Encryption failed |
H_ERR_DECRYPT_FAILED |
9803 | Decryption failed |