Skip to content

affine_trans_polygon_xldaffine_trans_polygon_xldAffineTransPolygonXldAffineTransPolygonXldaffine_trans_polygon_xldT_affine_trans_polygon_xld🔗

Short description🔗

affine_trans_polygon_xldaffine_trans_polygon_xldAffineTransPolygonXldAffineTransPolygonXldaffine_trans_polygon_xldT_affine_trans_polygon_xld — Apply an arbitrary affine transformation to XLD polygons.

Signature🔗

affine_trans_polygon_xld( xld_poly Polygons, out xld_poly PolygonsAffineTrans, hom_mat2d HomMat2D )affine_trans_polygon_xld( Polygons : PolygonsAffineTrans : HomMat2D : )void AffineTransPolygonXld( const HObject& Polygons, HObject* PolygonsAffineTrans, const HTuple& HomMat2D )static void HOperatorSet.AffineTransPolygonXld( HObject polygons, out HObject polygonsAffineTrans, HTuple homMat2D )def affine_trans_polygon_xld( polygons: HObject, hom_mat_2d: Sequence[float] ) -> HObject

Herror T_affine_trans_polygon_xld( const Hobject Polygons, Hobject* PolygonsAffineTrans, const Htuple HomMat2D )

HXLDPoly HXLDPoly::AffineTransPolygonXld( const HHomMat2D& HomMat2D ) const

HXLDPoly HHomMat2D::AffineTransPolygonXld( const HXLDPoly& Polygons ) const

HXLDPoly HXLDPoly.AffineTransPolygonXld( HHomMat2D homMat2D )

HXLDPoly HHomMat2D.AffineTransPolygonXld( HXLDPoly polygons )

Description🔗

affine_trans_polygon_xldAffineTransPolygonXld applies an arbitrary affine transformation, i.e., scaling, rotation, translation, and slant (skewing), to the XLD polygons given in Polygonspolygonspolygons and returns the transformed polygons in PolygonsAffineTranspolygonsAffineTranspolygons_affine_trans. The affine transformation is described by the homogeneous transformation matrix given in HomMat2DhomMat2Dhom_mat_2d. This matrix can be created using the operators hom_mat2d_identityHomMat2dIdentity, hom_mat2d_scaleHomMat2dScale, hom_mat2d_rotateHomMat2dRotate, hom_mat2d_translateHomMat2dTranslate, etc., or be the result of operators like vector_angle_to_rigidVectorAngleToRigid.

The components of the homogeneous transformation matrix are interpreted as follows: The row coordinate of the image corresponds to \(x\) and the column coordinate corresponds to \(y\) of the coordinate system in which the transformation matrix was defined. This is necessary to obtain a right-handed coordinate system for the image. In particular, this assures that rotations are performed in the correct direction. Note that the (\(x\),\(y\)) order of the matrices quite naturally corresponds to the usual (row,column) order for coordinates in the image.

Attention🔗

The XLD contours that are possibly referenced by Polygonspolygonspolygons are neither transformed nor stored with the output polygons, since this is generally impossible without creating inconsistencies for the attributes of the XLD contours. Hence, operators that access the contours associated with a polygon, e.g., split_contours_xldSplitContoursXld will not work correctly.

affine_trans_polygon_xldAffineTransPolygonXld does not use the HALCON standard coordinate system (with the origin in the center of the upper left pixel), but instead uses the same coordinate system as in affine_trans_pixelAffineTransPixel, i.e., the origin lies in the upper left corner of the upper left pixel. Therefore, applying affine_trans_polygon_xldAffineTransPolygonXld corresponds to a chain of transformations (see affine_trans_pixelAffineTransPixel), which is applied to each point of the polygon (input and output pixels as homogeneous vectors). As an effect, you might get unexpected results when creating affine transformations based on coordinates that are derived from the polygon, e.g., by operators like area_center_xldAreaCenterXld. For example, if you use this operator to calculate the center of gravity of a rotationally symmetric XLD polygon and then rotate the polygon around this point using hom_mat2d_rotateHomMat2dRotate, the resulting polygon will not lie on the original one. In such a case, you can compensate this effect by applying the following translations to HomMat2DhomMat2Dhom_mat_2d before using it in affine_trans_polygon_xldAffineTransPolygonXld:

 
hom_mat2d_translate(HomMat2D, 0.5, 0.5, HomMat2DTmp)
hom_mat2d_translate_local(HomMat2DTmp, -0.5, -0.5, HomMat2DAdapted)
affine_trans_polygon_xld(Polygons, PolygonsAffineTrans, HomMat2DAdapted)

For an explanation of the different 2D coordinate systems used in HALCON, see the introduction of chapter Transformations / 2D Transformations.

Execution information🔗

Execution information
  • Multithreading type: reentrant (runs in parallel with non-exclusive operators).

  • Multithreading scope: global (may be called from any thread).

  • Automatically parallelized on tuple level.

Parameters🔗

Polygonspolygonspolygons (input_object) xld_poly(-array) → objectobjectHObjectHXLDPolyHObjectHobject

Input XLD polygons.

PolygonsAffineTranspolygonsAffineTranspolygons_affine_trans (output_object) xld_poly(-array) → objectobjectHObjectHXLDPolyHObjectHobject *

Transformed XLD polygons.

HomMat2DhomMat2Dhom_mat_2d (input_control) hom_mat2d → (real)(real)HTuple (double)HHomMat2D, HTuple (double)Sequence[float]Htuple (double)

Input transformation matrix.

Result🔗

If the matrix HomMat2DhomMat2Dhom_mat_2d represents an affine transformation (i.e., not a projective transformation), affine_trans_polygon_xldAffineTransPolygonXld returns 2 (H_MSG_TRUE). If the input is empty the behavior can be set via set_system(::'no_object_result',<Result>:). If necessary, an exception is raised.

Combinations with other operators🔗

Combinations

Possible predecessors

hom_mat2d_identityHomMat2dIdentity, hom_mat2d_translateHomMat2dTranslate, hom_mat2d_rotateHomMat2dRotate, hom_mat2d_scaleHomMat2dScale, hom_mat2d_reflectHomMat2dReflect

See also

affine_trans_imageAffineTransImage, affine_trans_regionAffineTransRegion, affine_trans_contour_xldAffineTransContourXld

Module🔗

Foundation