get_metrology_object_fuzzy_param🔗
Short description🔗
get_metrology_object_fuzzy_param — Get a fuzzy parameter of a metrology model.
Signature🔗
get_metrology_object_fuzzy_param( metrology_model MetrologyHandle, integer Index, attribute.name GenParamName, out attribute.value GenParamValue )
Description🔗
get_metrology_object_param allows to access the fuzzy
parameters of metrology objects.
For an explanation of the concept of 2D metrology see the introduction of chapter 2D Metrology.
The metrology model is defined by the handle
MetrologyHandle. The parameter Index specifies
for which metrology objects the information is accessed. With
Index set to 'all', the parameters of all metrology
objects are accessed. The names of the desired parameters are passed
in the generic parameter GenParamName, the corresponding values
are returned in GenParamValue in the same order. All these
fuzzy parameters can be set and changed at any time with the operator
set_metrology_object_fuzzy_param.
The following parameters can be accessed:
-
'fuzzy_thresh': The meaning and the use of this parameter is equivalent to the parameter
FuzzyThreshof the operatorfuzzy_measure_posand is described there. -
'function_contrast': With this parameter the fuzzy function of type contrast that is set in the operator
set_metrology_object_paramcan be queried. The meaning and the use of this parameter is equivalent to the parameterSetTypewith the value 'contrast' of the operatorset_fuzzy_measureand is described there. The return valueGenParamValuecontains the function of the metrology object. -
'function_position': With this parameter the fuzzy function of type position that is set in the operator
set_metrology_object_paramcan be queried. Because only one fuzzy function of a type can be set, only the last set function can be returned. The type can be 'function_position', 'function_position_center', 'function_position_end', 'function_position_first_edge', or 'function_position_last_edge'.
Execution information🔗
Execution information
-
Multithreading type: reentrant (runs in parallel with non-exclusive operators).
-
Multithreading scope: global (may be called from any thread).
-
Processed without parallelization.
Parameters🔗
MetrologyHandle (input_control) metrology_model → (handle)
Handle of the metrology model.
Index (input_control) integer(-array) → (string / integer)
Index of the metrology objects.
Default: 'all'
Suggested values: 'all', 0, 1, 2
GenParamName (input_control) attribute.name-array → (string)
Names of the generic parameters.
Default: 'fuzzy_thresh'
List of values: 'function_contrast', 'function_position', 'fuzzy_thresh'
GenParamValue (output_control) attribute.value-array → (real / integer)
Values of the generic parameters.
Result🔗
If the parameters are valid, the operator
get_metrology_object_fuzzy_param returns the value 2 (H_MSG_TRUE). If
necessary, an exception is raised.
Combinations with other operators🔗
Combinations
Possible predecessors
get_metrology_object_indices, set_metrology_object_fuzzy_param
Possible successors
set_metrology_object_fuzzy_param
See also
Module🔗
2D Metrology