Skip to content

proj_match_points_distortion_ransac_guidedproj_match_points_distortion_ransac_guidedProjMatchPointsDistortionRansacGuidedProjMatchPointsDistortionRansacGuidedproj_match_points_distortion_ransac_guidedT_proj_match_points_distortion_ransac_guidedπŸ”—

Short descriptionπŸ”—

proj_match_points_distortion_ransac_guidedproj_match_points_distortion_ransac_guidedProjMatchPointsDistortionRansacGuidedProjMatchPointsDistortionRansacGuidedproj_match_points_distortion_ransac_guidedT_proj_match_points_distortion_ransac_guided β€” Compute a projective transformation matrix and the radial distortion coefficient between two images by finding correspondences between points based on known approximations of the projective transformation matrix and the radial distortion coefficient.

SignatureπŸ”—

proj_match_points_distortion_ransac_guided( image Image1, image Image2, point.y Rows1, point.x Cols1, point.y Rows2, point.x Cols2, string GrayMatchMethod, integer MaskSize, hom_mat2d HomMat2DGuide, real KappaGuide, real DistanceTolerance, number MatchThreshold, string EstimationMethod, number DistanceThreshold, integer RandSeed, out hom_mat2d HomMat2D, out real Kappa, out real Error, out integer Points1, out integer Points2 )proj_match_points_distortion_ransac_guided( Image1, Image2 : : Rows1, Cols1, Rows2, Cols2, GrayMatchMethod, MaskSize, HomMat2DGuide, KappaGuide, DistanceTolerance, MatchThreshold, EstimationMethod, DistanceThreshold, RandSeed : HomMat2D, Kappa, Error, Points1, Points2 )void ProjMatchPointsDistortionRansacGuided( const HObject& Image1, const HObject& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const HTuple& GrayMatchMethod, const HTuple& MaskSize, const HTuple& HomMat2DGuide, const HTuple& KappaGuide, const HTuple& DistanceTolerance, const HTuple& MatchThreshold, const HTuple& EstimationMethod, const HTuple& DistanceThreshold, const HTuple& RandSeed, HTuple* HomMat2D, HTuple* Kappa, HTuple* Error, HTuple* Points1, HTuple* Points2 )static void HOperatorSet.ProjMatchPointsDistortionRansacGuided( HObject image1, HObject image2, HTuple rows1, HTuple cols1, HTuple rows2, HTuple cols2, HTuple grayMatchMethod, HTuple maskSize, HTuple homMat2DGuide, HTuple kappaGuide, HTuple distanceTolerance, HTuple matchThreshold, HTuple estimationMethod, HTuple distanceThreshold, HTuple randSeed, out HTuple homMat2D, out HTuple kappa, out HTuple error, out HTuple points1, out HTuple points2 )def proj_match_points_distortion_ransac_guided( image_1: HObject, image_2: HObject, rows_1: Sequence[Union[float, int]], cols_1: Sequence[Union[float, int]], rows_2: Sequence[Union[float, int]], cols_2: Sequence[Union[float, int]], gray_match_method: str, mask_size: int, hom_mat_2dguide: Sequence[float], kappa_guide: float, distance_tolerance: float, match_threshold: Union[int, float], estimation_method: str, distance_threshold: Union[float, int], rand_seed: int ) -> Tuple[Sequence[float], float, float, Sequence[int], Sequence[int]]

Herror T_proj_match_points_distortion_ransac_guided( const Hobject Image1, const Hobject Image2, const Htuple Rows1, const Htuple Cols1, const Htuple Rows2, const Htuple Cols2, const Htuple GrayMatchMethod, const Htuple MaskSize, const Htuple HomMat2DGuide, const Htuple KappaGuide, const Htuple DistanceTolerance, const Htuple MatchThreshold, const Htuple EstimationMethod, const Htuple DistanceThreshold, const Htuple RandSeed, Htuple* HomMat2D, Htuple* Kappa, Htuple* Error, Htuple* Points1, Htuple* Points2 )

HHomMat2D HImage::ProjMatchPointsDistortionRansacGuided( const HImage& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const HString& GrayMatchMethod, Hlong MaskSize, const HHomMat2D& HomMat2DGuide, double KappaGuide, double DistanceTolerance, const HTuple& MatchThreshold, const HString& EstimationMethod, const HTuple& DistanceThreshold, Hlong RandSeed, double* Kappa, double* Error, HTuple* Points1, HTuple* Points2 ) const

HHomMat2D HImage::ProjMatchPointsDistortionRansacGuided( const HImage& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const HString& GrayMatchMethod, Hlong MaskSize, const HHomMat2D& HomMat2DGuide, double KappaGuide, double DistanceTolerance, Hlong MatchThreshold, const HString& EstimationMethod, double DistanceThreshold, Hlong RandSeed, double* Kappa, double* Error, HTuple* Points1, HTuple* Points2 ) const

HHomMat2D HImage::ProjMatchPointsDistortionRansacGuided( const HImage& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const char* GrayMatchMethod, Hlong MaskSize, const HHomMat2D& HomMat2DGuide, double KappaGuide, double DistanceTolerance, Hlong MatchThreshold, const char* EstimationMethod, double DistanceThreshold, Hlong RandSeed, double* Kappa, double* Error, HTuple* Points1, HTuple* Points2 ) const

HHomMat2D HImage::ProjMatchPointsDistortionRansacGuided( const HImage& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const wchar_t* GrayMatchMethod, Hlong MaskSize, const HHomMat2D& HomMat2DGuide, double KappaGuide, double DistanceTolerance, Hlong MatchThreshold, const wchar_t* EstimationMethod, double DistanceThreshold, Hlong RandSeed, double* Kappa, double* Error, HTuple* Points1, HTuple* Points2 ) const (Windows only)

HHomMat2D HHomMat2D::ProjMatchPointsDistortionRansacGuided( const HImage& Image1, const HImage& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const HString& GrayMatchMethod, Hlong MaskSize, double KappaGuide, double DistanceTolerance, const HTuple& MatchThreshold, const HString& EstimationMethod, const HTuple& DistanceThreshold, Hlong RandSeed, double* Kappa, double* Error, HTuple* Points1, HTuple* Points2 ) const

HHomMat2D HHomMat2D::ProjMatchPointsDistortionRansacGuided( const HImage& Image1, const HImage& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const HString& GrayMatchMethod, Hlong MaskSize, double KappaGuide, double DistanceTolerance, Hlong MatchThreshold, const HString& EstimationMethod, double DistanceThreshold, Hlong RandSeed, double* Kappa, double* Error, HTuple* Points1, HTuple* Points2 ) const

HHomMat2D HHomMat2D::ProjMatchPointsDistortionRansacGuided( const HImage& Image1, const HImage& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const char* GrayMatchMethod, Hlong MaskSize, double KappaGuide, double DistanceTolerance, Hlong MatchThreshold, const char* EstimationMethod, double DistanceThreshold, Hlong RandSeed, double* Kappa, double* Error, HTuple* Points1, HTuple* Points2 ) const

HHomMat2D HHomMat2D::ProjMatchPointsDistortionRansacGuided( const HImage& Image1, const HImage& Image2, const HTuple& Rows1, const HTuple& Cols1, const HTuple& Rows2, const HTuple& Cols2, const wchar_t* GrayMatchMethod, Hlong MaskSize, double KappaGuide, double DistanceTolerance, Hlong MatchThreshold, const wchar_t* EstimationMethod, double DistanceThreshold, Hlong RandSeed, double* Kappa, double* Error, HTuple* Points1, HTuple* Points2 ) const (Windows only)

HHomMat2D HImage.ProjMatchPointsDistortionRansacGuided( HImage image2, HTuple rows1, HTuple cols1, HTuple rows2, HTuple cols2, string grayMatchMethod, int maskSize, HHomMat2D homMat2DGuide, double kappaGuide, double distanceTolerance, HTuple matchThreshold, string estimationMethod, HTuple distanceThreshold, int randSeed, out double kappa, out double error, out HTuple points1, out HTuple points2 )

HHomMat2D HImage.ProjMatchPointsDistortionRansacGuided( HImage image2, HTuple rows1, HTuple cols1, HTuple rows2, HTuple cols2, string grayMatchMethod, int maskSize, HHomMat2D homMat2DGuide, double kappaGuide, double distanceTolerance, int matchThreshold, string estimationMethod, double distanceThreshold, int randSeed, out double kappa, out double error, out HTuple points1, out HTuple points2 )

HHomMat2D HHomMat2D.ProjMatchPointsDistortionRansacGuided( HImage image1, HImage image2, HTuple rows1, HTuple cols1, HTuple rows2, HTuple cols2, string grayMatchMethod, int maskSize, double kappaGuide, double distanceTolerance, HTuple matchThreshold, string estimationMethod, HTuple distanceThreshold, int randSeed, out double kappa, out double error, out HTuple points1, out HTuple points2 )

HHomMat2D HHomMat2D.ProjMatchPointsDistortionRansacGuided( HImage image1, HImage image2, HTuple rows1, HTuple cols1, HTuple rows2, HTuple cols2, string grayMatchMethod, int maskSize, double kappaGuide, double distanceTolerance, int matchThreshold, string estimationMethod, double distanceThreshold, int randSeed, out double kappa, out double error, out HTuple points1, out HTuple points2 )

DescriptionπŸ”—

Given a set of coordinates of characteristic points \((\textrm{Rows1},\textrm{Cols1})\) and \((\textrm{Rows2}\textrm{Cols2})\) in both input images Image1image1image_1 and Image2image2image_2, which must have identical size, and given known approximations HomMat2DGuidehomMat2DGuidehom_mat_2dguide and KappaGuidekappaGuidekappa_guide for the transformation matrix and the radial distortion coefficient between Image1image1image_1 and Image2image2image_2, proj_match_points_distortion_ransac_guidedProjMatchPointsDistortionRansacGuided automatically determines corresponding points, the homogeneous projective transformation matrix HomMat2DhomMat2Dhom_mat_2d, and the radial distortion coefficient Kappakappakappa\(\kappa\)) that optimally fulfill the following equation:

\[\begin{eqnarray*} \left(\begin{array}{c} r_{2} \\ c_{2} \\ 1 \end{array} \right) = \textrm{HomMat2D} \cdot \left(\begin{array}{c} r_{1} \\ c_{1} \\ 1 \end{array} \right). \end{eqnarray*}\]

Here, \((r_{1},c_{1})\) and \((r_{2},c_{2})\) denote image points that are obtained by undistorting the input image points with the division model (see Calibration):

\[\begin{eqnarray*} r = \frac{\tilde{r}}{1+\kappa (\tilde{r}^{2}+\tilde{c}^{2})} \qquad c = \frac{\tilde{c}}{1+\kappa (\tilde{r}^{2}+\tilde{c}^{2})} \end{eqnarray*}\]

Here, \((\tilde{r}_{1},\tilde{c}_{1}) = (\textrm{Rows1}-0.5(h-1), \textrm{Cols1}-0.5(w-1))\) and \((\tilde{r}_{2},\tilde{c}_{2}) = (\textrm{Rows2}-0.5(h-1), \textrm{Cols2}-0.5(w-1))\) denote the distorted image points, specified relative to the image center, and \(w\) and \(h\) denote the width and height of the input images. Thus, proj_match_points_distortion_ransac_guidedProjMatchPointsDistortionRansacGuided assumes that the principal point of the camera, i.e., the center of the radial distortions, lies at the center of the image.

The returned Kappakappakappa can be used to construct camera parameters that can be used to rectify images or points (see change_radial_distortion_cam_parChangeRadialDistortionCamPar, change_radial_distortion_imageChangeRadialDistortionImage, and change_radial_distortion_pointsChangeRadialDistortionPoints):

\[\begin{eqnarray*} \texttt{CamPar} & = & ['\textit{area\_scan\_telecentric\_division}', 1.0, \textrm{Kappa}, 1.0, 1.0,\\ & & 0.5(w-1), 0.5(h-1), w, h] \end{eqnarray*}\]

The approximations HomMat2DGuidehomMat2DGuidehom_mat_2dguide and KappaGuidekappaGuidekappa_guide can, for example, be calculated with proj_match_points_distortion_ransacProjMatchPointsDistortionRansac on lower resolution versions of Image1image1image_1 and Image2image2image_2. See the example below.

The matching process is based on characteristic points, which can be extracted with point operators like points_foerstnerPointsFoerstner or points_harrisPointsHarris. The matching itself is carried out in two steps: first, gray value correlations of mask windows around the input points in the first and the second image are determined and an initial matching between them is generated using the similarity of the windows in both images. Then, the RANSAC algorithm is applied to find the projective transformation matrix and radial distortion coefficient that maximizes the number of correspondences under the above constraint.

The size of the mask windows used for the matching is MaskSize x MaskSize. Three metrics for the correlation can be selected. If GrayMatchMethodgrayMatchMethodgray_match_method has the value 'ssd'"ssd", the sum of the squared gray value differences is used, 'sad'"sad" means the sum of absolute differences, and 'ncc'"ncc" is the normalized cross correlation. For details please refer to binocular_disparityBinocularDisparity. The metric is minimized ('ssd'"ssd", 'sad'"sad") or maximized ('ncc'"ncc") over all possible point pairs. A thus found matching is only accepted if the value of the metric is below the value of MatchThresholdmatchThresholdmatch_threshold ('ssd'"ssd", 'sad'"sad") or above that value ('ncc'"ncc").

To increase the algorithm’s performance, the search area for the match candidates is limited based on the approximate transformation specified by HomMat2DGuidehomMat2DGuidehom_mat_2dguide and KappaGuidekappaGuidekappa_guide. Only points within a distance of DistanceTolerancedistanceTolerancedistance_tolerance around the point in Image2image2image_2 that is obtained when transforming a point in Image1image1image_1 via HomMat2DGuidehomMat2DGuidehom_mat_2dguide and KappaGuidekappaGuidekappa_guide are considered for the matching.

After the initial matching has been completed, a randomized search algorithm (RANSAC) is used to determine the projective transformation matrix HomMat2DhomMat2Dhom_mat_2d and the radial distortion coefficient Kappakappakappa. It tries to find the parameters that are consistent with a maximum number of correspondences. For a point to be accepted, the distance to its corresponding transformed point must not exceed the threshold DistanceThresholddistanceThresholddistance_threshold. Consequently, DistanceThresholddistanceThresholddistance_threshold should be smaller than DistanceTolerancedistanceTolerancedistance_tolerance.

The parameter EstimationMethodestimationMethodestimation_method determines which algorithm is used to compute the projective transformation matrix. A linear algorithm is used if EstimationMethodestimationMethodestimation_method is set to 'linear'"linear". This algorithm is very fast and returns accurate results for small to moderate noise of the point coordinates and for most distortions (except for small distortions). For EstimationMethodestimationMethodestimation_method \(=\) 'gold_standard'"gold_standard", a mathematically optimal but slower optimization is used, which minimizes the geometric reprojection error. In general, it is preferable to use EstimationMethodestimationMethodestimation_method \(=\) 'gold_standard'"gold_standard".

The value Errorerrorerror indicates the overall quality of the estimation procedure and is the mean symmetric euclidean distance in pixels between the points and their corresponding transformed points.

Point pairs consistent with the above constraints are considered to be corresponding points. Points1points1points_1 contains the indices of the matched input points from the first image and Points2points2points_2 contains the indices of the corresponding points in the second image.

The parameter RandSeedrandSeedrand_seed can be used to control the randomized nature of the RANSAC algorithm, and hence to obtain reproducible results. If RandSeedrandSeedrand_seed is set to a positive number, the operator returns the same result on every call with the same parameters because the internally used random number generator is initialized with RandSeedrandSeedrand_seed. If RandSeedrandSeedrand_seed \(=\) 00, the random number generator is initialized with the current time. In this case the results may not be reproducible. The value set for the HALCON system variable 'seed_rand'"seed_rand" (see set_systemSetSystem) does not affect the results of proj_match_points_distortion_ransac_guidedProjMatchPointsDistortionRansacGuided.

Execution informationπŸ”—

Execution information
  • Multithreading type: reentrant (runs in parallel with non-exclusive operators).

  • Multithreading scope: global (may be called from any thread).

  • Processed without parallelization.

ParametersπŸ”—

Image1image1image_1 (input_object) singlechannelimage β†’ object (byte / uint2)object (byte / uint2)HObject (byte / uint2)HImage (byte / uint2)HObject (byte / uint2)Hobject (byte / uint2)

Input image 1.

Image2image2image_2 (input_object) singlechannelimage β†’ object (byte / uint2)object (byte / uint2)HObject (byte / uint2)HImage (byte / uint2)HObject (byte / uint2)Hobject (byte / uint2)

Input image 2.

Rows1rows1rows_1 (input_control) point.y-array β†’ (real / integer)(real / integer)HTuple (double / Hlong)HTuple (double / int / long)Sequence[Union[float, int]]Htuple (double / Hlong)

Input points in image 1 (row coordinate).

Restriction: length(Rows1) >= 5

Cols1cols1cols_1 (input_control) point.x-array β†’ (real / integer)(real / integer)HTuple (double / Hlong)HTuple (double / int / long)Sequence[Union[float, int]]Htuple (double / Hlong)

Input points in image 1 (column coordinate).

Restriction: length(Cols1) == length(Rows1)

Rows2rows2rows_2 (input_control) point.y-array β†’ (real / integer)(real / integer)HTuple (double / Hlong)HTuple (double / int / long)Sequence[Union[float, int]]Htuple (double / Hlong)

Input points in image 2 (row coordinate).

Restriction: length(Rows2) >= 5

Cols2cols2cols_2 (input_control) point.x-array β†’ (real / integer)(real / integer)HTuple (double / Hlong)HTuple (double / int / long)Sequence[Union[float, int]]Htuple (double / Hlong)

Input points in image 2 (column coordinate).

Restriction: length(Cols2) == length(Rows2)

GrayMatchMethodgrayMatchMethodgray_match_method (input_control) string β†’ (string)(string)HTuple (HString)HTuple (string)strHtuple (char*)

Gray value match metric.

Default: 'ncc'"ncc"
List of values: 'ncc', 'sad', 'ssd'"ncc", "sad", "ssd"

MaskSizemaskSizemask_size (input_control) integer β†’ (integer)(integer)HTuple (Hlong)HTuple (int / long)intHtuple (Hlong)

Size of gray value masks.

Default: 1010
Suggested values: 3, 7, 153, 7, 15
Value range: 1 ≀ MaskSize

HomMat2DGuidehomMat2DGuidehom_mat_2dguide (input_control) hom_mat2d β†’ (real)(real)HTuple (double)HHomMat2D, HTuple (double)Sequence[float]Htuple (double)

Approximation of the homogeneous projective transformation matrix between the two images.

KappaGuidekappaGuidekappa_guide (input_control) real β†’ (real)(real)HTuple (double)HTuple (double)floatHtuple (double)

Approximation of the radial distortion coefficient in the two images.

DistanceTolerancedistanceTolerancedistance_tolerance (input_control) real β†’ (real)(real)HTuple (double)HTuple (double)floatHtuple (double)

Tolerance for the matching search window.

Default: 20.020.0
Suggested values: 0.2, 0.5, 1.0, 2.0, 3.0, 5.0, 10.0, 20.0, 50.00.2, 0.5, 1.0, 2.0, 3.0, 5.0, 10.0, 20.0, 50.0
Restriction: DistanceTolerance > 0

MatchThresholdmatchThresholdmatch_threshold (input_control) number β†’ (integer / real)(integer / real)HTuple (Hlong / double)HTuple (int / long / double)Union[int, float]Htuple (Hlong / double)

Threshold for gray value matching.

Default: 0.70.7
Suggested values: 0.9, 0.7, 0.5, 10, 20, 50, 1000.9, 0.7, 0.5, 10, 20, 50, 100

EstimationMethodestimationMethodestimation_method (input_control) string β†’ (string)(string)HTuple (HString)HTuple (string)strHtuple (char*)

Algorithm for the computation of the projective transformation matrix.

Default: 'gold_standard'"gold_standard"
List of values: 'gold_standard', 'linear'"gold_standard", "linear"

DistanceThresholddistanceThresholddistance_threshold (input_control) number β†’ (real / integer)(real / integer)HTuple (double / Hlong)HTuple (double / int / long)Union[float, int]Htuple (double / Hlong)

Threshold for transformation consistency check.

Default: 11
Restriction: DistanceThreshold > 0

RandSeedrandSeedrand_seed (input_control) integer β†’ (integer)(integer)HTuple (Hlong)HTuple (int / long)intHtuple (Hlong)

Seed for the random number generator.

Default: 00

HomMat2DhomMat2Dhom_mat_2d (output_control) hom_mat2d β†’ (real)(real)HTuple (double)HHomMat2D, HTuple (double)Sequence[float]Htuple (double)

Computed homogeneous projective transformation matrix.

Kappakappakappa (output_control) real β†’ (real)(real)HTuple (double)HTuple (double)floatHtuple (double)

Computed radial distortion coefficient.

Errorerrorerror (output_control) real β†’ (real)(real)HTuple (double)HTuple (double)floatHtuple (double)

Root-Mean-Square transformation error.

Points1points1points_1 (output_control) integer-array β†’ (integer)(integer)HTuple (Hlong)HTuple (int / long)Sequence[int]Htuple (Hlong)

Indices of matched input points in image 1.

Points2points2points_2 (output_control) integer-array β†’ (integer)(integer)HTuple (Hlong)HTuple (int / long)Sequence[int]Htuple (Hlong)

Indices of matched input points in image 2.

ExampleπŸ”—

(HDevelop)


Factor := 0.5
zoom_image_factor (Image1, Image1Zoomed, Factor, Factor, 'constant')
zoom_image_factor (Image2, Image2Zoomed, Factor, Factor, 'constant')
points_foerstner (Image1Zoomed, 1, 2, 3, 200, 0.3, 'gauss', 'true', \
                  Rows1, Cols1, _, _, _, _, _, _, _, _)
points_foerstner (Image2Zoomed, 1, 2, 3, 200, 0.3, 'gauss', 'true', \
                  Rows2, Cols2, _, _, _, _, _, _, _, _)
get_image_size (Image1Zoomed, Width, Height)
proj_match_points_distortion_ransac (Image1Zoomed, Image2Zoomed, \
                                     Rows1, Cols1, Rows2, Cols2, \
                                     'ncc', 10, 0, 0, Height, Width, \
                                     0, 0.5, 'gold_standard', 2, 0, \
                                     HomMat2D, Kappa, Error, \
                                     Points1, Points2)
hom_mat2d_scale_local (HomMat2D, Factor, Factor, HomMat2DGuide)
hom_mat2d_scale (HomMat2DGuide, 1.0/Factor, 1.0/Factor, 0, 0, \
                 HomMat2DGuide)
KappaGuide := Kappa*Factor*Factor
points_foerstner (Image1, 1, 2, 3, 200, 0.3, 'gauss', 'true', \
                  Rows1, Cols1, _, _, _, _, _, _, _, _)
points_foerstner (Image2, 1, 2, 3, 200, 0.3, 'gauss', 'true', \
                  Rows2, Cols2, _, _, _, _, _, _, _, _)
proj_match_points_distortion_ransac_guided (Image1, Image2, \
                                            Rows1, Cols1, \
                                            Rows2, Cols2, \
                                            'ncc', 10, \
                                            HomMat2DGuide, \
                                            KappaGuide, 5, 0.5, \
                                            'gold_standard', 2, 0, \
                                            HomMat2D, Kappa, \
                                            Error, Points1, Points2)
get_image_size (Image1, Width, Height)
CamParDist := ['area_scan_division',0.0,Kappa,1.0,1.0, \
               0.5*(Width-1),0.5*(Height-1),Width,Height]
change_radial_distortion_cam_par ('fixed', CamParDist, 0, CamPar)
change_radial_distortion_image (Image1, Image1, Image1Rect, \
                                CamParDist, CamPar)
change_radial_distortion_image (Image2, Image2, Image2Rect, \
                                CamParDist, CamPar)
concat_obj (Image1Rect, Image2Rect, ImagesRect)
gen_projective_mosaic (ImagesRect, MosaicImage, 1, 1, 2, HomMat2D, \
                       'default', 'false', MosaicMatrices2D)

Combinations with other operatorsπŸ”—

Combinations

Possible predecessors

points_foerstnerPointsFoerstner, points_harrisPointsHarris

Possible successors

vector_to_proj_hom_mat2d_distortionVectorToProjHomMat2dDistortion, change_radial_distortion_cam_parChangeRadialDistortionCamPar, change_radial_distortion_imageChangeRadialDistortionImage, change_radial_distortion_pointsChangeRadialDistortionPoints, gen_binocular_proj_rectificationGenBinocularProjRectification, projective_trans_imageProjectiveTransImage, projective_trans_image_sizeProjectiveTransImageSize, projective_trans_regionProjectiveTransRegion, projective_trans_contour_xldProjectiveTransContourXld, projective_trans_point_2dProjectiveTransPoint2d, projective_trans_pixelProjectiveTransPixel

Alternatives

proj_match_points_distortion_ransacProjMatchPointsDistortionRansac

See also

proj_match_points_ransacProjMatchPointsRansac, proj_match_points_ransac_guidedProjMatchPointsRansacGuided, hom_vector_to_proj_hom_mat2dHomVectorToProjHomMat2d, vector_to_proj_hom_mat2dVectorToProjHomMat2d

ReferencesπŸ”—

Richard Hartley, Andrew Zisserman: ``Multiple View Geometry in Computer Visionβ€™β€˜; Cambridge University Press, Cambridge; 2003.

Olivier Faugeras, Quang-Tuan Luong: ``The Geometry of Multiple Images: The Laws That Govern the Formation of Multiple Images of a Scene and Some of Their Applicationsβ€™β€˜; MIT Press, Cambridge, MA; 2001.

ModuleπŸ”—

Matching