Region morphology🔗
Region morphology provides a set of morphological operators that allow you to modify or describe the shape of a region. The morphological operators can be used, for example, to connect or disconnect adjacent regions or to smooth the boundary of a region.
Dilating or eroding a region🔗
To dilate or erode an
During dilation, the reference point of the structuring element is added to the resulting region whenever the structuring element and the input region have at least one pixel in common.
This results in an enlarged region, as shown in the image below.
Erosion reduces the area of the input region because the reference point is only added to the resulting region if the structuring element lies completely within the input region.
As a result, erosion can alternatively be used to find objects.
![]() |
![]() |
![]() |
![]() |
Figure 1.
Image with input region
Structuring element with reference point in the origin
Result of dilating the input region
Result of eroding the input region
Table 1 shows the operators that can be used to dilate or erode a region.
| Morphological operators | Structuring element | Reference point | |
|---|---|---|---|
dilation1 |
erosion1 |
arbitrary | origin |
minkowski_add1 |
minkowski_sub1 |
arbitrary, transposed | origin |
dilation2 |
erosion2 |
arbitrary | arbitrary |
minkowski_add2 |
minkowski_sub2 |
arbitrary, transposed | arbitrary |
dilation_circle |
erosion_circle |
circular | origin |
dilation_rectangle1 |
erosion_rectangle1 |
rectangular | origin |
Note
Minkowski addition and dilation are identical if the structuring element is symmetric. The same applies to Minkowski subtraction and erosion.
Erosion can be used to separate objects that are attached to each other. In the following example, the steps that are required to separate objects are described briefly.
Example
First, the objects of the image must be segmented, for example by using the operator threshold.
Next, the operator connection is used to get multiple regions instead of a single region.
As shown in the image
below, the result of the connection is unsatisfactory because several objects are merged.
This problem can be solved using erosion.
As mentioned above, erosion reduces the area of the input region.
Thus, if erosion is applied prior to the operator connection, the regions are separated as desired.
Lastly, dilation is applied on the separated regions to approximately get the original shape back.
Opening or closing a region🔗
Both operations generate the resulting region by combining dilation and erosion operations.
Opening is an erosion followed by a dilation.
It is useful to eliminate small unwanted structures.
Closing is the opposite of opening, i.e., a dilation followed by an erosion.
The closing operator is able to close small gaps, as shown in the figure below.
![]() |
![]() |
![]() |
![]() |
Figure 4.
Image with input region
Structuring element with reference point
Result of applying an opening to the input region
Result of applying a closing
Table 2 shows the operators that can be used to open or close a region.
| Morphological operators | Structuring element | Reference point | |
|---|---|---|---|
opening |
closing |
arbitrary | origin |
opening_circle |
closing_circle |
circular | origin |
opening_rectangle1 |
closing_rectangle1 |
rectangular | origin |
Further operators🔗
In addition to the operators mentioned above, you can use top_hat to get the difference between the input region and the result of the opening, or bottom_hat to get the difference between the result of the closing and the input region.
Furthermore, you can calculate the boundary of a region with the operator boundary.
![]() |
![]() |
![]() |
Figure 5.
Top hat
Bottom hat
Boundary
The operator hit_or_miss can be used to find objects, taking the foreground and the background of the image into account.
To remove unwanted branches from a skeleton, pruning is a suitable operator.
















